2015 DODGE VIPER radio

Cavity Relay Cartridge
Fuse
Mini-Fuse Description
61 G8VA — — Run Relay #1
62 G8VA — — Run Relay #2
63HC Micro ——ASD #1
64HC Micro ——ASD #2
65G8VA ——Run Accy #1, Pop Up, Driver Door Window Switch
NOTE:A 15 Amp fuse for the radio system is located
in-line at the battery positive terminal.CAUTION!
•When installing the power distribution center
cover, it is important to ensure the cover is properly
positioned and fully latched. Failure to do so may
allow water to get into the power distribution
center and possibly result in an electrical system
failure.
(Continued)
350 MAINTAINING YOUR VEHICLE

Pets....................................81
Placard, Tire And Loading Information..........255
Power
Brakes...............................239
Door Locks............................25
Mirrors...............................92
Outlet (Auxiliary Electrical Outlet)...........129
Steering..............................235
Windows..............................27
Pregnant Women And Seat Belts...............40
Pretensioners
Seat Belts..............................41
Programming Transmitters (Remote Keyless Entry) . .22
Radial Ply Tires..........................261
Radiator Cap (Coolant Pressure Cap)...........330
Radio Antenna...........................195
Radio Operation..........................196
Radio (Sound Systems).....................193
Rear Camera.............................118
Rear Liftgate.............................30
Rear Window Defroster.....................138
Rear Window Features.....................138
Reclining Front Seats.......................96
Recorder, Event Data.......................69
Recreational Towing.......................287
Reformulated Gasoline.....................278
Refrigerant..............................322
Reminder, Lights On.......................104
Reminder, Seat Belt.........................34
Remote Keyless Entry (RKE)..................20
FCC General Information..................24
Programming Additional Key Fobs...........16
Programming Additional Transmitters.........16
Remote Battery Replacement................22
Transmitter Battery Replacement.............22
Remote Sound System (Radio) Controls.........194
Replacement Keys.........................15
390 INDEX

INSTALLATION OF RADIO TRANSMITTING
EQUIPMENT
Special design considerations are incorporated into this
vehicle’s electronic system to provide immunity to radio
frequency signals. Mobile two-way radios and telephone
equipment must be installed properly by trained person-
nel. The following must be observed during installation.
The positive power connection should be made directly
to the battery and fused as close to the battery as possible.
The negative power connection should be made to body
sheet metal adjacent to the negative battery connection.
This connection should not be fused.
Antennas for two-way radios should be mounted on the
roof or the rear area of the vehicle. Care should be used
in mounting antennas with magnet bases. Magnets may
affect the accuracy or operation of the compass on
vehicles so equipped.
The antenna cable should be as short as practical and
routed away from the vehicle wiring when possible. Use
only fully shielded coaxial cable.
Carefully match the antenna and cable to the radio to
ensure a low Standing Wave Ratio (SWR).
Mobile radio equipment with output power greater than
normal may require special precautions.
All installations should be checked for possible interfer-
ence between the communications equipment and the
vehicle’s electronic systems.