2015 DODGE JOURNEY shield

Coolant Pressure Cap (Radiator Cap)...........565
Cooling System...........................561
Adding Coolant (Antifreeze)...............563
Coolant Capacity.......................597
Coolant Level..........................561
Disposal of Used Coolant.................565
Drain, Flush, and Refill...................562
Inspection............................566
Points to Remember.....................566
Pressure Cap..........................565
Radiator Cap..........................565
Selection of Coolant (Antifreeze).............562
Corrosion Protection.......................575
Cupholders.............................273
Customer Assistance.......................613
Data Recorder, Event.......................75
Daytime Brightness, Interior Lights.............229
Daytime Running Lights....................224
Dealer Service............................545
Defroster, Rear Window.....................288
Defroster, Windshield......................106
Delay (Intermittent) Wipers..................230
Diagnostic System, Onboard.................543
Dimmer Switch, Headlight...................227
Dipsticks
Automatic Transmission..................571
Oil (Engine)...........................547
Power Steering.........................430
Disabled Vehicle Towing....................535
Disposal
Antifreeze (Engine Coolant)................565
Door Locks
Door Locks............................28
Key Fob . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Remote...............................28
Remote Keyless Entry (RKE)................28
Door Locks, Automatic......................31
626 INDEX

Untwisting Procedure, Seat Belt................52
Upholstery Care..........................578
Vanity Mirrors...........................120
Vehicle Certification Label...................491
Vehicle Identification Number (VIN).............6
Vehicle Loading..........................454
Vehicle Modifications/Alterations...............7
Vehicle Security Alarm (Security Alarm)..........17
Vehicle Storage...........................400
Viscosity, Engine Oil.......................549
Voice Command..........................183
Warning Flasher, Hazard....................511
Warning Lights (Instrument Cluster Description) . . .298
Warnings and Cautions.......................6
Warranty Information......................616
Washer
Adding Fluid..........................558
Washers, Windshield.......................229
Washing Vehicle..........................576
Water
Driving Through........................427
Wheel and Wheel Trim.....................577
Wheel and Wheel Trim Care.................577
Wind Buffeting............................42
Window Fogging.........................401
Windows................................39
Power................................39
Wind Buffeting..........................42
Windshield Defroster.......................106
Windshield Washers.......................229
Fluid................................558
Windshield Wiper Blades....................556
Windshield Wipers........................229
Wiper Blade Replacement...................556
Wiper, Delay.............................230
Wiper, Rear.............................28610
INDEX 643

INSTALLATION OF RADIO TRANSMITTING
EQUIPMENT
Special design considerations are incorporated into this
vehicle’s electronic system to provide immunity to radio
frequency signals. Mobile two-way radios and telephone
equipment must be installed properly by trained person-
nel. The following must be observed during installation.
The positive power connection should be made directly
to the battery and fused as close to the battery as possible.
The negative power connection should be made to body
sheet metal adjacent to the negative battery connection.
This connection should not be fused.
Antennas for two-way radios should be mounted on the
roof or the rear area of the vehicle. Care should be used
in mounting antennas with magnet bases. Magnets may
affect the accuracy or operation of the compass on
vehicles so equipped.
The antenna cable should be as short as practical and
routed away from the vehicle wiring when possible. Use
only fully shielded coaxial cable.
Carefully match the antenna and cable to the radio to
ensure a low Standing Wave Ratio (SWR).
Mobile radio equipment with output power greater than
normal may require special precautions.
All installations should be checked for possible interfer-
ence between the communications equipment and the
vehicle’s electronic systems.