Power
Brakes...............................459
Distribution Center (Fuses)................626
Door Locks............................32
Inverter..............................259
Lift Gate..............................46
Mirrors..............................128
Outlet (Auxiliary Electrical Outlet)...........254
Seats................................141
Steering..............................453
Sunroof..............................251
Tilt/Telescoping Steering Column............188
Windows..............................40
Pregnant Women and Seat Belts................58
Preparation for Jacking.....................557
Pretensioners
Seat Belts..............................59
Programming Transmitters (Remote Keyless Entry) . .22
Quadra-Trac.............................440
Radial Ply Tires..........................486
Radiator Cap (Coolant Pressure Cap)...........611
Radio Operation..........................379
Radio Remote Controls.....................377
Radio (Sound Systems).....................354
Rain Sensitive Wiper System.................186
Rear Air Conditioning......................391
Rear Axle (Differential).....................615
Rear Camera............................237
Rear Cross Path..........................137
Rear Cupholder..........................261
Rear ParkSense System.....................228
Rear Seat, Folding.........................156
Rear Window Features.....................274
Rear Wiper/Washer........................274
Reclining Front Seats.......................146
Recorder, Event Data.......................81
678 INDEX
INSTALLATION OF RADIO TRANSMITTING
EQUIPMENT
Special design considerations are incorporated into this
vehicle’s electronic system to provide immunity to radio
frequency signals. Mobile two-way radios and telephone
equipment must be installed properly by trained person-
nel. The following must be observed during installation.
The positive power connection should be made directly
to the battery and fused as close to the battery as possible.
The negative power connection should be made to body
sheet metal adjacent to the negative battery connection.
This connection should not be fused.
Antennas for two-way radios should be mounted on the
roof or the rear area of the vehicle. Care should be used
in mounting antennas with magnet bases. Magnets may
affect the accuracy or operation of the compass on
vehicles so equipped.
The antenna cable should be as short as practical and
routed away from the vehicle wiring when possible. Use
only fully shielded coaxial cable.
Carefully match the antenna and cable to the radio to
ensure a low Standing Wave Ratio (SWR).
Mobile radio equipment with output power greater than
normal may require special precautions.
All installations should be checked for possible interfer-
ence between the communications equipment and the
vehicle’s electronic systems.
