2015 DODGE CHARGER SRT ESP

Uconnect® 5.0 System With Integrated Center
Stack
1 — RADIO
Push the RADIO button on the faceplate to enter Radio
Mode. The different tuner modes; AM, FM and SXM (if
equipped), can be selected by pressing the corresponding
buttons on the touchscreen in Radio Mode.
2 — COMPASS
Push the COMPASS button on the faceplate to display
the current direction of the vehicle.
3 — CLIMATE
Push the Climate button on the faceplate to access the
Climate Controls.
4 — + MORE
Push the + MORE button on the faceplate to access
additional options.
1
IDENTIFYING YOUR RADIO 5

Uconnect® 5.0 System w/o Integrated Center
Stack
1 — RADIO
Push the RADIO button on the faceplate to enter Radio
Mode. The different tuner modes; AM, FM and SXM (if
equipped), can be selected by pressing the corresponding
buttons on the touchscreen in Radio Mode.
2 — COMPASS
Push the COMPASS button on the faceplate to display
the current direction of the vehicle.
3 — SETTINGS
Push the SETTINGS button on the faceplate to display
the customer programmable features.
4 — + MORE
Push the + MORE button on the faceplate to access
additional options.
1
IDENTIFYING YOUR RADIO 7

RADIO MODE
The radio is equipped with the following modes:
•AM
•FM
•SXM SiriusXM Satellite Radio (If Equipped)
Push the RADIO button on the faceplate to enter Radio
Mode. The different tuner modes; AM, FM, and SXM, can
then be selected by pressing the corresponding button on
the touchscreen in the Radio mode.
Volume/Mute
Rotate the VOLUME/MUTE rotary knob to adjust the
Volume. When the audio system is turned on, the sound
will be set at the same volume level as last played.
Push the VOLUME/MUTE button to mute the system.
Push the VOLUME/MUTE button again to unmute the
system.
Enter/Browse & Tune/Scroll Control
Turn the rotary TUNE/SCROLL control knob clockwise
to increase or counterclockwise to decrease the radio
station frequency. Push the ENTER/BROWSE button to
choose a selection.
Seek Functions
Seek Up
Press and release the “Seek Up”button on the
touchscreen to tune the radio to the next listenable
station or channel.
During a Seek Up function, if the radio reaches the
starting station after passing through the entire band two
times, the radio will stop at the station where it began.
10 RADIO MODE

TIP:When providing a Voice Command, push the
PHONE buttonand say“Call,”then pronounce the
nameexactlyas it appears in your phone book. When
a contact has multiple phone numbers, you can say
“CallJohn Smithwork.”
Voice Text Reply
Uconnect® will announceincomingtext messages. Push the
PHONE buttonand sayListen.(Must have compat-
ible mobile phone paired to Uconnect® system.)
1.Once an incoming text message is read to you, push the
PHONE button. After the beep, say...“Reply”
2. Listen to the Uconnect® prompts. After the beep,
repeat one of the pre-defined messages and follow the
system prompts.
PRE-DEFINED VOICE TEXT REPLY RESPONSES
Yes. Stuck in traffic. See you later.
No. Start without
me.
I’ll be late.
38 Uconnect® 5.0 VOICE RECOGNITION QUICK TIPS

PRE-DEFINED VOICE TEXT REPLY RESPONSES
Okay. Where are you? I will be ber> minutes
late.Call me. Are you there
yet?
I’ll call you
later.
I need direc-
tions.
See you in
of
minutes.I’m on my way. Can’t talk right
now.I’m lost. Thanks.
TIP:Your mobile phone must have the full implementa-
tion of theMessage Access Profile (MAP)to take advan-
tage of this feature. For details about MAP, visit
UconnectPhone.com. Apple iPhone® iOS6 or later sup-
ports reading incoming text messages only.
Additional Information
© 2014 Chrysler Group LLC. All rights reserved. Mopar®
and Uconnect® are registered trademarks and Mopar
Owner Connect is a trademark of Chrysler Group LLC.
Android is a trademark of Google Inc. SiriusXM and all
related marks and logos are trademarks of SiriusXM
Radio Inc. Yelp, Yelp logo, Yelp burst and related marks
are registered trademarks of Yelp®.
DriveUconnect.com
Uconnect® System Support 1-877-855-8400
Mon. – Fri., 7:00 am – 12:00 am, ET
Sat., 8:00 am – 10:00 pm, ET
Sun., 9:00 am – 5:00 pm, ET
Uconnect® Access Services Support 1-855-792-4241.
Please have your Uconnect® Security PIN ready when
you call.
5
Uconnect® 5.0 VOICE RECOGNITION QUICK TIPS 39

SETTINGS MAIN MENU
Push the SETTINGS button on your faceplate, if one
exists, to display the Settings Main Menu. If not, push the
+ MORE button on the faceplate then the “Settings”
button on your touchscreen. The Settings Main Menu
contains the following options:
Display
Press the “Display” button on the touchscreen.
Display Mode
When in this display you may select one of the auto
display settings. To change Mode status, press and re-
lease “Auto” or “Manual” buttons and then select
“Done.”
Language
When in this display, you may select one of three
languages for all display nomenclature. Press “Lan-
guage” on the touchscreen. Press the “Back Arrow”
button on the touchscreen to return to the previous
menu.
Units
When in this display, you may choose between US and
Metric units of measure to be displayed in the EVIC.
Press “US” or “Metric.” Press the “Back Arrow” button
on the touchscreen to return to the previous menu.
Voice Resp. Length — If Equipped
When in this display, you may change the Voice Re-
sponse Length settings. To change the Voice Response
Length, press the “Brief” or “Detailed” button on the
touchscreen. Press the “Back Arrow” button on the
touchscreen to return to the previous menu.
42 SETTINGS MAIN MENU

Touchscreen Beep
When in this display, you may turn on or shut off the
sound heard when a touchscreen button is pressed. Press
the “Touchscreen Beep” button on the touchscreen and
select either On or Off. Press the “Back Arrow” button on
the touchscreen to return to the previous menu.
Voice — If Equipped
When in this display, you may change the Voice Re-
sponse Length settings. To change the Voice Response
Length, press the “Brief” or “Detailed” button on the
touchscreen. Press the “Back Arrow” button on the
touchscreen to return to the previous menu.
Clock & Date
Refer to the “Radio” section for details.
Safety/Assistance — If Equipped
Refer to “Understanding Your Instrument
Panel/Uconnect® System” section in your vehicle Own-
er ’s Manual for details.
Lights
When this feature is selected, it allows the adjustment of
the amount of time the headlights remain on after the
engine is shut off. To change the Headlights Off Delay
setting, press the “Headlights Off Delay” button on the
touchscreen, and choose either 0 sec, 30 sec, 60 sec or 90
seconds. Press the “Back Arrow” button on the touch-
screen to return to the previous menu.
6
SETTINGS MAIN MENU 43

SAFETY GUIDELINES
WARNING!
ALWAYS drive safely with your hands on the
steering wheel. You have full responsibility and
assume all risks related to the use of the
Uconnect® features and applications in this ve-
hicle. Only use Uconnect® when it is safe to do so.
Failure to do so may result in an accident involv-
ing serious injury or death.
Ensure all persons read this manual carefully before
using the system. It contains instructions on how to use
the system in a safe and effective manner.
Please read and follow these safety precautions. Failure
to do so may result in injury or property damage.
•Glance at screen only when safe to do so. If prolonged
viewing of the screen is required, park in a safe
location and set the parking brake
•Stop use immediately if a problem occurs. Failure to
do so may cause injury or damage to the product.
Return it to your authorized dealer to repair.
•Ensure the volume level of the system is set to a level
that still allows you to hear outside traffic and emer-
gency vehicles.
50 SAFETY GUIDELINES