2015 DODGE CHARGER SRT phone

9. When the pairing process has successfully completed,
the system will prompt you to choose whether or not
this is your favorite phone. Selecting “Yes” will make
this phone the highest priority. This phone will take
precedence over other paired phones within range and
will connect to the Uconnect® system automatically
when entering the vehicle. Only one mobile phone
and/or one Bluetooth® audio device can be connected
to the Uconnect® system at a time. If “No” is selected,
simply select “Uconnect” from the mobile phone/
audio device Bluetooth® screen, and the Uconnect®
system will reconnect to the Bluetooth® device.
Phonebook Download — Phonebook Transfer
From Mobile Phone
If equipped and specifically supported by your phone,
Uconnect® Phone will ask you if you want to download
names (text names) and number entries from your mobile
phone’s phonebook. Specific Bluetooth® Phones with
Phone Book Access Profile may support this feature. See
UconnectPhone.comfor supported phones.
NOTE:
•Download and update, if supported, begins as soon as
the Bluetooth® wireless phone connection is made to
the Uconnect® Phone, for example, after you start the
vehicle.
•You may be asked for permission to initiate the phone-
book download.
28 Uconnect® PHONE

•A maximum of 2,000 contact names with six numbers
per contact will be downloaded and updated every
time a phone is connected to the Uconnect® Phone.
•Depending on the maximum number of entries down-
loaded, there may be a short delay before the latest
downloaded names can be used. Until then, if avail-
able, the previously downloaded phonebook is avail-
able for use.
•Only the phonebook of the currently connected mobile
phone is accessible.
•Only the mobile phones phonebook is downloaded.
SIM card phonebook is not part of the Mobile
phonebook.
•This downloaded phonebook cannot be edited or
deleted on the Uconnect® Phone. These can only be
edited on the mobile phone. The changes are trans-
ferred and updated to Uconnect® Phone on the next
phone connection.
Making A Phone Call
1. Push the PHONE button on the steering wheel.
2. After the BEEP, say “dial” (or “call” a full name or
phone number).
Receiving A Call — Accept (And End)
1. When an incoming call rings or is announced on
Uconnect®, push the PHONE button on the faceplate.
2. To end a call, push the PHONE button on steering
wheel or the PHONE button on the faceplate.
Mute (Or Unmute) Microphone During Call
1. During a call, push the VOICE COMMAND button on
the steering wheel.
2. After the BEEP, say “mute” (or “mute off.”)
4
Uconnect® PHONE 29

Transfer Ongoing Call Between Handset And
Vehicle
1. During a call, push the VOICE COMMAND button on
the steering wheel.
2. After the BEEP, say “transfer call.”
Changing The Volume
1. Start a dialogue by pushing the PHONE button on the
faceplate, then adjust the volume during a normal call.
2. Use the radio ON/VOLUME rotary knob to adjust the
volume to a comfortable level while the Uconnect®
system is speaking. Please note the volume setting for
Uconnect® phone is different than the audio system
volume setting.
30 Uconnect® PHONE

Uconnect® 5.0 VOICE RECOGNITION QUICK TIPS
CONTENTS
!Uconnect® VOICE RECOGNITION. . . . . . . . . . .32
▫Introducing Uconnect®. . . . . . . . . . . . . . . . . .32
▫Get Started. . . . . . . . . . . . . . . . . . . . . . . . . . .33
▫Basic Voice Commands. . . . . . . . . . . . . . . . . .34
▫Radio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
▫Media. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
▫Phone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
▫Voice Text Reply. . . . . . . . . . . . . . . . . . . . . . .38
▫Additional Information. . . . . . . . . . . . . . . . . .395

Get Started
1. VisitUconnectPhone.comto check mobile device and
feature compatibility and to find phone pairing in-
structions.
2. Reduce background noise. Wind and passenger con-
versations are examples of noise that may impact
recognition.
3. Speak clearly at a normal pace and volume while
facing straight ahead. The microphone is positioned
on the rearview mirror and aimed at the driver.
4. Each time you give a Voice Command, you must first
push either the VR or PHONE button, wait untilafter
the beep, then say your Voice Command.
5. You can interrupt the help message or system prompts
by pushing the VR or PHONE button and saying a
Voice Command from current category.
All you need to control your Uconnect® system with
your voice are the buttons on your steering wheel.
1—PushToBeginRadioOrMediaFunctions2 — Push To Initiate, Answer, Or End A Phone Call, Send Or Re-ceive A Text
5
Uconnect® 5.0 VOICE RECOGNITION QUICK TIPS 33

Basic Voice Commands
The basic Voice Commands below can be given at any
point while using your Uconnect® system.
Push the VR button. After the beep, say#
•Cancelto stop a current voice session
•Helpto hear a list of suggested Voice Commands
•Repeatto listen to the system prompts again
Notice the visual cues that inform you of your voice
recognition system’s status. Cues appear on the touch-
screen.1 — Push To Initiate Or To Answer A Phone Call, Send Or Re-ceive A Text2—PushToBeginRadioOrMediaFunctions3—PushToEndCall
34 Uconnect® 5.0 VOICE RECOGNITION QUICK TIPS

TIP:Press the “Browse” button on the touchscreen to see
all of the music on your iPod® or USB device. Your Voice
Command must matchexactlyhow the artist, album,
song and genre information is displayed.
Phone
Making and answering hands-free phone calls is easy
with Uconnect®. When the Phonebook button is illumi-
nated on your touchscreen, your system is ready. Check
UconnectPhone.comfor mobile phone compatibility
and pairing instructions.
Push the PHONE button. After the beep, say one of
the following commands:
•CallJohn Smith
•Dial123-456-7890 and follow the system prompts
•Redial(call previous outgoing phone number)
•Call back(call previous incoming phone number)
5
Uconnect® 5.0 VOICE RECOGNITION QUICK TIPS 37

TIP:When providing a Voice Command, push the
PHONE buttonand say“Call,”then pronounce the
nameexactlyas it appears in your phone book. When
a contact has multiple phone numbers, you can say
“CallJohn Smithwork.”
Voice Text Reply
Uconnect® will announceincomingtext messages. Push the
PHONE buttonand sayListen.(Must have compat-
ible mobile phone paired to Uconnect® system.)
1.Once an incoming text message is read to you, push the
PHONE button. After the beep, say...“Reply”
2. Listen to the Uconnect® prompts. After the beep,
repeat one of the pre-defined messages and follow the
system prompts.
PRE-DEFINED VOICE TEXT REPLY RESPONSES
Yes. Stuck in traffic. See you later.
No. Start without
me.
I’ll be late.
38 Uconnect® 5.0 VOICE RECOGNITION QUICK TIPS