2015 DODGE CHARGER SRT headlight bulb

NOTE:
•If either light remains on and does not flash, or there is
a very fast flash rate, check for a defective outside light
bulb. If an indicator fails to light when the lever is
moved, it would suggest that the indicator bulb is
defective.
•A “Turn Signal On” message will appear in the Drivers
Information Display (DID) and a continuous chime
will sound if the vehicle is driven more than 1 mi
(1.6 km) with either turn signal on.
Lane Change Assist
Tap the lever up or down once, without moving beyond
the detent, and the turn signal (right or left) will flash
three times then automatically turn off.
High/Low Beam Switch
Push the multifunction lever away from you to switch
the headlights to high beam. Pull the multifunction lever
toward you to switch the headlights back to low beam.
Flash-To-Pass
You can signal another vehicle with your headlights by
lightly pulling the multifunction lever toward you. This
will turn on the high beam headlights until the lever is
released.
NOTE:If the multifunction lever is held in the flash-to
pass position for more than 20 seconds, the high beams
will shut off.
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151

CAUTION!
Do not touch the new bulb with your fingers. Oil
contamination will severely shorten bulb life. If the
bulb comes in contact with an oily surface, clean the
bulb with rubbing alcohol.
3. Disconnect the bulb from the socket assembly and
install the replacement bulb.
4. Reinstall the bulb and socket assembly into the head-
lamp assembly, and then turn it clockwise.
5. Reinstall the dust cap.
Front Low/High Beam Headlamp And Park/Turn
Lamp — Models With High Intensity Discharge
Headlamps (HID)
HID Headlamps
The headlamps are a type of high voltage discharge tube.
High voltage can remain in the circuit even with the
headlamp switch off and the key removed.Because of
this, you should not attempt to service a headlamp bulb
yourself. If a headlamp bulb fails, take your vehicle to
an authorized dealer for service.
WARNING!
A transient high voltage occurs at the bulb sockets of
HID headlamps when the headlight switch is turned
ON. It may cause serious electrical shock or electro-
cution if not serviced properly. See your authorized
dealer for service.
7
MAINTAINING YOUR VEHICLE 545

Keyless Go...............................12
Key, Replacement..........................17
Keys...................................12
Key, Sentry (Immobilizer)....................16
Lane Change and Turn Signals................150
Lane Change Assist........................151
LaneSense..............................201
Lap/Shoulder Belts.........................47
Latches................................100
Lead Free Gasoline........................450
Leaks, Fluid.............................100
Life of Tires.............................439
Light Bulbs..............................100
Lights.................................100
Airbag................................69
Alarm...............................251
Anti-Lock.............................251
Automatic Headlights....................146
Brake Assist Warning....................416
Brake Warning.........................251
Bulb Replacement.......................544
Daytime Running.......................149
Dimmer Switch, Headlight.................150
Exterior..............................100
Fog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..149
Headlights............................145
Headlights On Reminder..................149
Headlights On With Wipers................146
Headlight Switch.......................145
High Beam............................151
High Beam Indicator.....................251
High Beam/Low Beam Select...............151
Illuminated Entry........................20
Instrument Cluster......................145
Intensity Control........................154
Interior..............................154
License..............................546
10
INDEX 581