2015 Citroen DS3 buttons

DS3_en_Chap01_controle-de-marche_ed01-2015
Monochrome screen A
This displays the following information:
-  t ime,
-


date,
-
 
a
mbient   temperature   (this   flashes   if   there   is  
a

  risk   of   ice),
-

s
tatus of the doors and boot,
-
 
c
urrent   audio   source   (radio,   CD...),
-
 
t
rip   computer,
-
 
i
nformation   or   alert   messages,
-
 
s
ettings   menus   for   the   screen   and   the  
v

ehicle   systems.
displays in the screen
From the control panel of your Audio system, you   can:
F

p
ress the "ME
n
U"
 
button   to   gain   access   to  
t

he main menu ,
F

p
ress the " 5" or " 6" buttons to scroll
through
  the   items   in   the   screen,
F

p
ress the "MO
dE" 
button   to   change  
t

he   permanent   application   (date,   audio  
s

ource...),
F

p
ress the " 7" or " 8"
  buttons   to   change   a  
s

etting   value,
F

p
ress the "OK"
 
button   to   confirm,


or
F

p
ress the "Back" button to abandon the
operation
  in   progress.
Controls
F Press the "MEn U"  button   to   gain   access  t
o the main menu , then press the "5"
or
"6 "
  buttons   to   scroll   through   the   various  
m

enus:
-


radio - CD,
-
 
v
ehicle   configuration,
-


options,
-
 d

isplay
 se
ttings,
-
 lan

guages,
-
 un

its.
F

P
ress the "OK"
 
button   to   select   the   menu  
r

equired.
Main menu

DS3_en_Chap01_controle-de-marche_ed01-2015
Languages
Once the "Languages" menu has been selected, you   can   change   the   language   used   by   the s

creen   by   choosing   one   from   a   defined   list.
Units
Once the "Units" menu has been selected, you   can   change   the   units   of   the   following  
par

ameters:
-
 
t
emperature   (°C   or   °F),
-
 
f
uel   consumption   (l/100   km,   mpg   or   km/l).
Once
  the   fuel   consumption   units   have  
b

een   set   to   mpg,   the   information   in   the  
i

nstrument   panel   screen   on   speed   and  
d

istance   will   also   be   in   mph   and   miles.
As
  a   safety   measure,   configuration   by  
t

he   driver   of   the   multifunction   screen  
s

hould   only   be   done   when   stationary.
display settings
Once the "Display settings" menu has been selected, you   can   gain   access   to   the   following   settings:
- year,
-  m onth,
-


d ay,
-


h o u r,
-
 m

inutes,
-
 
1
2   or   24   hour   mode.
F
 
O
nce   you   have   selected   a   setting,   press  
t

he "7" or " 8"
  buttons   to   change   its   value.
F

P
ress the " 5" or " 6" buttons to switch
respectively
  to   the   previous   or   next   setting.
F

P
ress the "OK"
 
button   to   save   the   change  
a

nd   return   to   the   normal   display   or   press  
t

he "Back"
 
button   to   cancel. Setting the date and time
F

P
ress the ME
n
U
 
button.
F
 
S
elect   "Display   settings"   using   the   "5 "
or
"6 "
  button.
F
Press "OK"
 

to   confirm   the   selection.
F
 
S
elect   the   "Year"   function   using   the   "5 "
or
"6 "
  button.
F
Press "OK"
 

to   confirm   the   selection.
F
 
C
hoose   the   desired   value,   using   the   "7 "
or
"8 "
  button.
F
Press "OK"
 

to   confirm   the   selection.
F

R
epeat the procedure to set the "Month",
"Day",
  "Hours",   and   "Minutes".

45
DS3_en_Chap01_controle-de-marche_ed01-2015
Monochrome screen C
This displays the following information:
-  t ime,
-


date,
-
 
a
mbient   temperature   (this   flashes   if   there   is  
a

  risk   of   ice),
-

s
tatus of doors and boot,
-
 
a
udio   sources   (radio,   CD,   USB   port   /  
a

uxiliary   socket   etc.),
-
 
t
rip   computer,
-
 
i
nformation   or   alert   messages,
-
 
s
ettings   menus   for   the   screen   and   vehicle  
s

ystems.
displays in the screen
From your Audio system control panel, you can:
F p ress the "MEn U"  button   to   gain   access   to  
t

he main menu ,
F

p
ress the " 5" or " 6" buttons to scroll
through
  the   items   in   the   screen,
F

p
ress the "MO
dE" 
button   to   change   the  
p

ermanent   application   (trip   computer,  
a

udio
 s
ource...),
F

p
ress the " 7" or " 8"
  buttons   to   change   a  
s

etting   value,
F

p
ress the "OK"
 
button   to   confirm,
or
F

p
ress the "Back" button to abandon the
operation
  in   progress.
Controls
F Press the "MEn U"  button   to   gain   access  t
o the main menu :
-
a

udio functions,
-
 
t
he   trip   computer,
-
 pe

rsonalisation-configuration,
-
 
t
elephone   (hands-free   kit).
F

P
ress the " 5" or " 6" buttons to select the
menu
  required,   then   confirm   by   pressing  
t

he "OK"
 
button.
Main menu
Monitoring

47
DS3_en_Chap01_controle-de-marche_ed01-2015
"Personalisation-
Configuration" menu
Once this menu has been selected, you can gain   access   to   the   following   functions:
-
 
d
efine   the   vehicle   parameters,
-
 
d
isplay   configuration,
-
 
c
hoice   of   language.
Define the vehicle parameters
Once this menu has been selected, you can activate   or   deactivate   the   following   equipment:
-
 
w
iper   linked   to   reverse   gear   (refer   to   the  
"

Visibility"
 s
ection),
-
 
g
uide-me-home   lighting   and   duration   (refer  
t

o   the   " Visibility"   section), Example:
  setting   of   the   duration   of   the   guide-
me-home
 l
ighting
F
P
ress the "
5" or " 6" buttons, then the
"OK"  button   to   select   the   menu   required.F
P
ress the "
5" or " 6" buttons, then the
"OK"
 
button   to   select   the   "Guide-me-home  
h

eadlamps"
 l
ine.
F
P
ress the "
7" or " 8" buttons to set the
value   required   (15,   30   or   60   seconds),   then  
p

ress the "OK"
 
button   to   confirm.
F
P
ress the "5" or " 6" buttons, then the
"OK" button to select the "OK"
 

box   and  
c

onfirm   or   press   the   "Back" button to
cancel.
This menu is also used to reinitialise the tyre u nder-inflation   detection   system   (refer   to   the  
"

Safety"
 s
ection).
-
 
p
arking   sensors   (refer   the   "Driving"  
s

ection).
-  
a
utomatic   emergency   braking   (refer   to   the  
"

Active   City   Brake"   section).
Monitoring

49
DS3_en_Chap01_controle-de-marche_ed01-2015
Touch screen tablet
This system gives access to:
-  m enus   for   adjusting   settings   for   vehicle  
f

unctions   and   systems,
-
 
a
udio   and   display   configuration   menus,
-
 
a
udio   system   and   telephone   controls   and  
t

he   display   of   associated   information.
-
 
t
he   display   of   alert   messages,
-
 
t
he   display   of   ambient   temperature   (a   blue  
s

now   flake   appears   if   there   is   a   risk   of   ice),
-
 
t
he   trip   computer.
And,
  depending   on   equipment,   it   allows:
-
 
t
he   display   of   the   visual   parking   sensors  
i

nformation,
-
 
a
ccess   to   the   controls   for   the   navigation  
s

ystem   and   Internet   services,   and   the  
d

isplay   of   associated   information. After
  a   few   moments   with   no   action   on  
t

he   secondary   page,   the   primary   page  
i

s   displayed   automatically.
As
  a   safety   measure,   some   functions  
c

an   only   be   viewed   when   stationary.  
T

heir display is interrupted as soon as
the
  vehicle   moves   off.general operation
Recommendations
It is necessary to press firmly, particularly for "flick"   gestures   (scrolling   through   lists,   moving  
t

he
 m
ap...).
A
  light   wipe   is   not   enough.
The
  screen   does   not   recognise   pressing   with  
m

ore   than   one   finger.
This
  technology   allows   use   at   all   temperatures  
a

nd   when   wearing   gloves.
Do
  not   use   pointed   objects   on   the   touch   screen  
t

ablet.
Do not touch the touch screen tablet with wet
hands.
Uses a soft clean cloth to clean the touch
screen
 t

ablet.
Principles
Press the " MEn U" button for access to the
different   menus,   then   press   the   virtual   buttons  
i

n   the   touch   screen   tablet.
Each
  menu   is   displayed   over   one   or   two   pages  
(

primary   page   and   secondary   page).
Use the " Options"
  button   to   go   to   the  
s

econdary
 pag
e.
Use this button for access to
additional
  information   and   to   the  
s

ettings   for   certain   functions.
Use
  this   button   to   confirm.
Use this button to return to the
primary
  page   or   to   quit.
Monitoring

63
DS3_en_Chap02_ouvertures_ed01-2015
Do not throw the remote control batteries   away,   they   contain   metals  
w

hich   are   harmful   to   the   environment.
Take
  them   to   an   approved   collection  
po

int.Lost keys
Go to a CITROËN dealer with the vehicle's registration document, your personal identification   documents   and   if   possible   the   key   code   label.
The
  CITROËN   dealer   will   be   able   to   look   up   the   key   code   and   the   transponder   code  
r

equired   to   order   a   new   key.
Remote control
The high frequency remote control is a sensitive system; do not operate it while it is in your pocket   as   there   is   a   possibility   that   it   may   unlock   the   vehicle,   without   you   being   aware   of   it.
Do
  not   repeatedly   press   the   buttons   of   your   remote   control   out   of   range   and   out   of   sight   of  
y

our   vehicle.   You   run   the   risk   of   stopping   it   from   working   and   the   remote   control   would   have  
t

o   be   reinitialised.
No
  remote   control   can   operate   when   the   key   is   in   the   ignition   switch,   even   when   the   ignition  
i

s   switched   off,   except   for   reinitialisation.
Locking the vehicle
Driving with the doors locked may make access to the passenger compartment by the emergency   services   more   difficult   in   an   emergency.
As
  a   safety   precaution,   never   leave   children   alone   in   the   vehicle,   except   for   a   very   short
 p

eriod.
In
  all   cases,   it   is   essential   to   remove   the   key   from   the   ignition   switch   when   leaving   the   vehicle.
Anti-theft protection
Do not make any modifications to the electronic engine immobiliser system; this could cause m alfunctions.
When purchasing a second-hand vehicle
Have the pairing of all of the keys in your possession checked by a CITROËN dealer, to ensure   that   only   your   keys   can   be   used   to   open   and   start   the   vehicle.
Access

DS3_en_Chap03_confort_ed01-2015
Digital air conditioningThe air conditioning operates when the engine is running, as well as in STOP mode with Stop & Start.
Automatic operation
1. Automatic "comfort" programme
Press the "AUTO"  button.  T
he "AUTO"  symbol   is   displayed. For
  your   comfort,   when   the   engine   is  
s

witched   off,   the   settings   are   retained  
u

ntil   the   engine   is   switched   on   again.
To   prevent   too   great   a   distribution   of  
c

old   air   when   the   engine   is   cold,   the   air  
f

low   will   only   reach   its   optimum   level  
g

radually.
2. Temperature adjustment
The value indicated on the display corresponds
to
  a   level   of   comfort   and   not   to   a   temperature   in  
d

egrees   Celsius   or   Fahrenheit. On
  entering   the   vehicle,   if   the   interior  
i

s very cold or hot, there is no need to
change   the   value   displayed   in   order  
t

o   reach   the   required   level   of   comfort.  
T

he   system   corrects   the   temperature  
d

ifference   automatically   and   as   quickly  
a

s   possible.
Press the " 5" and " 6" buttons to
change
  this   value.   A   setting   around  
t

he value 21
 
enables   optimum  
c

omfort   to   be   obtained.   However,  
d

epending   on   your   requirements,   a  
s

etting   between   18   and   24   is   usual.
3. Automatic "visibility" programme
The automatic comfort programme m
ay   not   be   sufficient   for   rapid  
d

emisting   or   defrosting   of   the  
w

indscreen and side windows
(humidity,
  several   passengers,   ice,  
e

t c .) .
With
  Stop   &   Start,   when   demisting   has  
b

een   activated,   the   STOP   mode   is   not  
a

vailable.
In
 
this
 
case,   select   the   automatic   visibility  
p

rogramme.   The   button   3   indicator   lamp  
comes
 
on.
The
 
system   automatically   controls   the   air  
c

onditioning   and   the   flow   of   air   and   provides  
o

ptimum
 
air   distribution   to   the   windscreen   and  
s

ide
 
windows.   It   deactivates   air   recirculation   5.
To
 
exit
 
this   programme,   press   button   3   again  
or "AUTO" ,
  the   indicator   lamp   on   the   button  
g

oes
 
off
 
and   "AUTO"
 
is   displayed.
We
 
recommend
 
that
 
you
 
use
 
this
 
mode.
 
I

t
 
provides
 
optimised
 
automatic
 
control
 
of
 
a

ll
 
of
 
the
 
following
 
functions:
 
passenger
 
c

ompartment
 
temperature,
 
air
 
flow,
 
air
 
d

istribution
 
and
 
air
 
intake,
 
in
 
accordance
 
with
 
t

he
 
comfort
 
value
 
that
 
you
 
have
 
chosen.
This
 
system
 
is
 
designed
 
to
 
operate
 
effectively
 
i

n
 
all
 
seasons,
 
with
 
the
 
windows
 
closed.

121
DS3_en_Chap04_conduite_ed01-2015
F Turn  thumb   wheel   1 to the "LIMIT"
position:   the   speed   limiter   mode   is  
s

elected   but   is   not   switched   on   (PAUSE).
You
  do   not   have   to   switch   the   speed   limiter   on  
i

n   order   to   set   the   speed.
F
 
S
et   the   speed   value   by   pressing   button   2
or 3
  (e.g.:   55   mph   (90   km/h)).
Programming
You can then change the programmed speed using buttons 2 and 3:
-  b y   +   or   -   1   mph   (km/h)   =   short   press,
-
 
b
y   +   or   -   5   mph   (km/h)   =   long   press,
-
 
i
n   steps   of   +   or   -   5   mph   (km/h)   =   maintained   press.
F
 
S
witch   the   speed   limiter   on   by   pressing   button   4.
F
 
S
witch   the   speed   limiter   off   by   pressing   button   4:
  the   display  
c

onfirms   that   it   has   been   switched   off   (PAUSE).
F
 
S
witch   the   speed   limiter   back   on   by   pressing   button   4  
ag
ain.
Exceeding the programmed speed
Pressing the accelerator pedal to exceed the programmed speed will not have any effect unless you press the pedal firmly past the point of resistance.
The
  speed   limiter   is   deactivated   temporarily   and   the   programmed   speed,
 w

hich   is   still   displayed,   flashes.
Returning
  to   the   programmed   speed,   by   means   of   intentional   or   unintentional
 d

eceleration   of   the   vehicle,   automatically   cancels   the   flashing   of   the
 pro

grammed
 s
peed. On a steep descent or in the event of
sharp
  acceleration,   the   speed   limiter  w
ill not be able to prevent the vehicle
from
  exceeding   the   programmed  
s

peed.
To
  avoid   any   risk   of   jamming   of   the  
ped

als:
-
 
e
nsure   that   the   mat   is   secured  
c

o r r e c t l y,
-
 
d
o   not   fit   one   mat   on   top   of   another.
Leaving limiter mode
F Turn  thumb   wheel   1 to the "0"  position:  t
he   speed   limiter   mode   is   deselected.   The  
d

isplay   returns   to   the   distance   recorder.
Operating fault
In the event of a speed limiter fault, the speed is   cleared   resulting   in   flashing   of   the   dashes.
Have
  it   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
driving