137
Model without AUTO lighting
Model with AUTO lighting
Manual controls
The lighting is controlled directly by the driver by means of the ring A and the stalk B.
Automatic
illumination of headlamps.
B.
S
talk for switching the headlamp beam:
p
ull the stalk to switch between dipped and
m
ain beam headlamps.
In
the lamps off and sidelamps modes,
t
he driver can switch on the main beam
h
eadlamps temporarily ("headlamp flash") by
m
aintaining a pull on the stalk.
A.
M
ain lighting mode selection ring: turn it
t
o position the symbol required facing the
ma
rk.Lighting
off / daytime running lamps.
Sidelamps
o
nly.
Dipped headlamps or main beam headlamps.
displays
Lighting of the corresponding indicator lamp on the instrument panel confirms the switching on
o
f the lighting selected.
The
instrument panel has permanent back-
lighting.
Illumination of the instrument panel is
t
herefore not linked to the exterior lighting.
Visibility
143
System for selection and control of the various front and rear wiping modes for the elimination
o
f rain and cleaning.
The
vehicle's front and rear wipers are
d
esigned to improve the driver's visibility
p
rogressively according to the climatic
c
onditions.
Wiper controls
Programming
Various automatic wiper control modes are also a vailable according to the following options:
-
a
utomatic
r
ain
sen
sitive
w
indscreen
w
ipers,
-
r
ear wiping on engaging reverse gear.
Model with AUTO wiping
The wiper commands are issued directly by the driver by means of the stalk A and the ring B.
Manual controls
Windscreen wipers
A. Wiping speed selection stalk.
Single wipe (press down and
r
elease).Automatic,
then single wipe
(see
the corresponding section).
Fast
(heavy rain).
Normal
(moderate rain).
Intermittent
(proportional to the
s
peed of the vehicle).
Of f.
or
Model without AUTO wiping
Visibility
147
A. Courtesy lamp
B. Map reading lamps
Courtesy lam p
In this position, the courtesy lamp c
omes on gradually:
Courtesy lamp
- when the vehicle is unlocked,
- w hen the key is removed from the ignition,
-
w
hen a door is opened,
-
w
hen the remote control locking button is
a
ctivated, in order to locate your vehicle.
It
switches off gradually:
-
w
hen the vehicle is locked,
-
w
hen the ignition is switched on,
-
3
0 seconds after the last door is closed.
Permanently
off.
Permanent
l
ighting.
With the "permanent lighting" mode, the duration of lighting varies, depending on the circumstances:
-
w
ith the ignition off, approximately
t
en minutes,
-
i
n energy economy mode, approximately
t
hirty seconds,
- with the engine running, unlimited.
Map reading lamps
F With the ignition on, press the c
orresponding s witch.
Visibility
Under-inflation detection
System which automatically checks the pressures of the tyres while driving.
T he under-inflation detection system
d
oes not replace the vigilance or the
r
esponsibility of the driver.
This
system does not avoid the need to
c
heck the tyre pressures (including the
s
pare wheel) every month as well as
b
efore a long journey.
Driving
with under-inflated tyres
i
mpairs road holding, extends braking
d
istances and causes premature
t
yre wear, particularly under arduous
c
ondition (high loading, high speed,
lon
g
jo
urney).The
inflation pressures defined for
y
our vehicle can be found on the tyre
p
ressure label.
See
the "Identification markings"
s
ection.
Tyre
pressures should be checked
w
hen the tyres are "cold" (vehicle
s
topped for 1 hour or after a journey of
l
ess than 6 miles (10 km) at moderate
s
peeds).
Other wise
(when hot), add 0.3 bar to
t
he pressures shown on the label.
Driving
with under-inflated tyres
i
ncreases fuel consumption.
The
system monitors the pressures in the four
t
yres, once the vehicle is moving.
It
compares the information given by the four
w
heel speed sensors with reference values,
which must be reinitialised ever y time the
tyre pressures are adjusted or a wheel
changed .
The
system triggers an alert as soon as it
d
etects a drop in the inflation pressure of one
o
r more tyres.
159
Emergency braking assistance
System which, in an emergency, enables you to obtain the optimum braking pressure more
q
uickly, thus reducing the stopping distance.
Activation
It is triggered by the speed at which the brake pedal is pressed.
The
effect of this is a reduction in the
r
esistance of the pedal and an increase in
b
raking
e
fficiency.
When
braking in an emergency, press
f
irmly without releasing the pressure.
Trajectory control systems
Anti-slip regulation (ASR)
and electronic stability
programme (ESP)
The anti-slip regulation (also known as Traction Control) optimises traction to prevent skidding
o
f the wheels, by acting on the brakes of the
d
riving wheels and on the engine.
The
electronic stability programme acts on the
b
rake of one or more wheels and on the engine
t
o keep the vehicle on the trajectory required
b
y the driver, within the limits of the laws of
p
hysics.Activation
These systems are activated automatically each time the vehicle is started.
They
come into operation in the event of a grip
o
r
t
rajectory
pro
blem.
This
is indicated by flashing of this
w
arning lamp in the instrument panel.
Safety
deactivation
In exceptional conditions (starting a vehicle which is bogged down, stuck in snow, on soft
g
round...), it may be advisable to deactivate the
A
SR and ESP systems, so that the wheels can
m
ove freely and regain grip.
F
P
ress the "ESP OFF" button, located on
t
he left below the steering wheel.
Illumination
of the lamp in the button indicates
t
hat
t
he
A
SR
a
nd
ES
P
s
ystems
a
re
d
eactivated.
Reactivation
These systems are reactivated automatically each time the ignition is switched back on or
f
rom 30 mph (50 km/h) except 1.6 litre
(THP
150, THP 155 and THP 160) and
R
ACING petrol engines.
F
P
ress the "ESP OFF" button again to
r
eactivate
t
hem
ma
nually.
Operating fault
The ESP/ASR systems offer exceptional s afety i n n ormal d riving, b ut
t
his should not encourage the driver to
t
ake extra risks or drive at high speed.
The
correct functioning of these
s
ystems depends on observation of the
ma
nufacturer's
r
ecommendations
o
n:
-
w
heels (tyres and rims),
-
b
raking components,
-
el
ectronic
c
omponents,
-
a
ssembly and repair procedures.
After
an impact, have these systems
c
hecked by a CITROËN dealer or a
q
ualified
w
orkshop.
Illumination
of this warning lamp in
t
he instrument panel and the lamp in
t
he "ESP OFF" button, accompanied
b
y an audible signal and a message
i
n
the
multifunction screen, this indicates a
m
alfunction of these systems.
Have
it checked by a CITROËN dealer or a
q
ualified
w
orkshop.
161
Active City Brake
Active City Brakeis a driving assistance system that aims to avoid a frontal collision or reduce
t
he speed of an impact if the driver does
n
ot take sufficient action (inadequate brake
a
pplication).
This system is designed to improve driving safety.
I t remains the driver's responsibility to c
ontinuously monitor the state of the traffic and
t
o assess the distances and relative speeds of
o
ther
v
ehicle.
Active
City Brakecan in no circumstances replace
t
he need for vigilance on the part of the driver.
never look at the laser sensor through an o
ptical in strument ( magnifying g lass, m
icroscope...) at a distance of less than
1
0 centimetres: risk of eye injury.Automatic
braking occurs later than if
d
one by the driver, so as to intervene
o
nly when there is a high risk of
c
ollision.
Principle
Using a laser sensor located at the top of the windscreen, this system detects a vehicle
r
unning in the same direction or stationary
a
head of your vehicle.
When
necessary, the vehicle's braking system
i
s operated automatically to avoid a collision
w
ith the vehicle ahead.
Conditions for activation
Active City Brakeonly operates if the following conditions are met:
●
i
gnition on,
●
t
he vehicle is in a for ward gear,
●
s
peed is between about 3 and 18 mph
(
5 and 30 km/h),
●
t
he braking assistance systems (ABS,
E
BFD, emergency braking assistance) are
n
ot faulty,
●
t
he trajectory control systems (ASR, DSC)
a
re not deactivated or faulty,
●
t
he vehicle is not in a tight corner,
●
t
he system has not been triggered during
t
he previous 10 seconds.
Safety
deactivation
The system is deactivated in the vehicle configuration menu, accessible with the ignition on.
Its state is memorised when the ignition is switched off.
When
the system is deactivated, a
m
essage is displayed every time the
i
gnition is switched on, to warn you.
With the monochrome screen C
F Press the MENU button for access to the
main menu.
F
Sel
ect "Personalisation-Configuration ".
F
Sel
ect "
def
ine vehicle parameters ".
F
Sel
ect "
dr
iving assistance ".
F
Select " Automatic emergency braking: OFF "
or " Automatic emergency braking : ON".
F Press the " 7" or " 8" button to check or u
ncheck the box and respectively activate
o
r deactivate the system.
F
P
ress the " 5" or " 6" button, then the OK
button to select the "OK"
box and confirm
o
r the Back
button to cancel.
With the colour screen
F Press the SETUP button .
F Sel ect "Vehicle parameters "
and press
t
he knob to confirm.
F
Sel
ect "
dr
iving assistance "
and press the
k
nob to confirm.
F
Select " Automatic emergency braking: OFF "
or " Automatic emergency braking: ON ".
F Check or uncheck the box to activate or d
eactivate the system.
F
P
ress the knob to confirm.