2015 CITROEN DS3 CABRIO headlamp

141
LED lampsThis daytime lighting, a signature of the vehicle, comprises two sets of light-emitting diodes (LEDs), located   in   vertical   cutouts   below   each   headlamp.
On
  starting   the   vehicle,   in   daylight   the   LED  
l

amps   come   on   automatically,   if   the   lighting  
s

talk   is   in   position   "0" or "AUTO" .
If
  the   sidelamps   and   headlamps   are   switched  
o

n   manually   or   automatically,   the   LED   lamps  
s

witch   off. For
  countries   where   exterior   lighting   by   day   is  
n

ot   a   legal   requirement,   you   can   activate   or  
d

eactivate   the   function   via   the   multifunction  
s

creen   configuration   menu.
ProgrammingIn countries where it is a legal requirement:
-
 
t
his   function   is   activated   by   default  
a

nd   cannot   be   deactivated,
-
 
i
n   daylight,   the   sidelamps   and  
n

umber   plate   lamps   also   come   on,
-
 
I
f   the   sidelamps   or   headlamps  
a

re   switched   on   manually   or  
a

utomatically,   the   LED   lamps  
s

witch   off.
For
  versions   not   fitted   with   LED   lamps,  
i

t   is   the   dipped   beam   headlamps   that  
c

ome   on   automatically   on   starting  
t

he vehicle.
Visibility

Travelling abroad
LEd / Xenon front lamps
For motoring in countries that drive on the other s
ide   of   the   road,   it   is   necessary   to   adapt   the  
a

djustment   of   the   dipped   beams   so   as   to   not  
d

azzle   the   drivers   of   approaching   vehicles.
F
 
R
aise   the   bonnet   for   access   to   the   adjuster  
(

one   adjuster   per   headlamp).
F
 
I
nsert   a   suitable   allen   key   (not   supplied)  
i

nto   the   hexagonal   head   of   the   adjuster.
F
 
T
urn   the   allen   key   half   a   turn   clockwise.
Headlamp adjustment
To avoid causing a nuisance to other road u
sers,   the   height   of   the   headlamps   should   be  
a

djusted   in   relation   to   the   load   in   the   vehicle.
0.
 
D
river   only   or   driver   +   front   passenger.
-.
 I

ntermediate
 s
etting.
1.
 5

  people.
-.
 
5
  people   +   load   in   the   boot.
2.
 D

river   only   +   maximum   authorised   load   in  
t

he   boot.
This
  position   is   sufficient   to   avoid   causing  
d

azzle.
Higher
  settings   may   limit   the   spread   of   light  
f

rom   the   headlamps.
The
  initial   setting   is   position   "0". On
  your   return,   don't   forget   to   return  
y

our   headlamps   to   their   initial   setting,  
b

y   carrying   out   these   operations   in  
r

everse
 o
rder.

219
Changing a bulb
The headlamps are fitted with polycarbonate   glass   with   a   protective  
c

oating:
F

d
o not clean them using a dr y
or abrasive cloth, nor with a
detergent or solvent product,
F
 
u
se   a   sponge   and   soapy   water   or   a  
p

H   neutral   product,
F
 
w
hen   using   a   high   pressure  
w

asher   on   persistent   marks,   do   not  
k

eep   the   lance   directed   towards  
t

he   lamps   or   their   edges   for   too  
l

ong,   so   as   not   to   damage   their  
p

rotective   coating   and   seals.
Halogen headlamps
1. direction indicators (PY21W amber).
2. S
idelamps (W5W).
3.
M

ain beam headlamps (H1-55W).
4.
di

pped beam headlamps (H7-55W).
5.
F

ront foglamps (PSX24W).
6.
L

E d
la
mps (LE d s).
Changing
 
a
 
bulb
 
should
 
only
 
be
 
done
 
a

fter
 
the
 
headlamp
 
has
 
been
 
switched
 
o

ff
 
for
 
several
 
minutes
 
(risk
 
of
 
serious
 
b

urns).
F
 
D

o
 
not
 
touch
 
the
 
bulb
 
directly
 
with
 
y

our
 
fingers,
 
use
 
a
 
lint-free
 
cloth.
It
 
is
 
imperative
 
to
 
use
 
only
 
anti-
ultraviolet
 
(UV)
 
type
 
bulbs
 
to
 
avoid
 
d

amaging
 t

he
 h

eadlamp.
Always
 
replace
 
a
 
failed
 
bulb
 
with
 
a
 
n

ew
 
bulb
 
with
 
the
 
same
 
type
 
and
 s
pecification.
Practical information

Changing direction indicator
bulbs
Rapid flashing of the direction indicator warning   lamp   (right   or   left)   indicates   the  
f

ailure   of   a   bulb   on   that   side.
F
 
T

urn   the   bulb   holder   a   quarter   of   a   turn   and  
e

xtract   it.
F
 
P

ull   out   the   bulb   and   change   it.
To refit, carry out these operations in reverse
o r d e r.
Changing dipped beam headlamp
bulbs
F Remove   the   protective   cover   by   pulling   the  t
ab.
F
 
D
isconnect   the   bulb   connector.
F
 
S
pread   the   springs   to   release   the   bulb.
F
 
P
ull   the   bulb   out   and   change   it.
To refit, carry out these operations in reverse
o r d e r.
Amber
 
coloured
 
bulbs,
 
such
 
as
 
the
 
d

irection
 
indicators,
 
must
 
be
 
replaced
 
w

ith
 
bulbs
 
of
 
identical
 
specifications
 
a

nd
 
colour.
When
 
refitting,
 
close
 
the
 
protective
 
c

over
 
carefully
 
to
 
preserve
 
the
 
sealing
 
o

f
 
the
 
headlamp.

221
Changing main beam headlamp bulbsChanging sidelamp bulbs
F Remove  the   protective   cover   by   pulling   the  t
ab.
F
 
D
isconnect   the   bulb   connector.
F
 
S
pread   the   springs   to   release   the   bulb.
F
 
R
emove   the   bulb   and   change   it.
To refit, carry out these operations in reverse
o r d e r. F
 R emove   the   protective   cover   by   pulling   the  t
ab.
F
 
P
ull   the   bulb   holder   pressing   on   the   tabs   on  
bo

th
 s
ides.
F
 
P
ull   the   bulb   and   change   it.
To refit, carry out these operations in reverse
o r d e r.
LEd* / Xenon front lamps
* LED: light-emitting diode.
1.

di
rection indicators (LE
ds
).
2.
S
idelamps (LE d s).
3.
di
pped beam headlamps (Xenon).
4.
M
ain beam headlamps (LE
ds / Xe
non).
5.
da
ytime running lamps (LE d s).
6.
F
ront foglamps (PSX24W).
For   replacements   on   of   these   types   of   lamps  
(

LED   /   Xenon),   contact   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Practical information

233
Fuse N°Rating Functions
F12 30 AWindscreen
  wipers   slow   /   fast   speed.
F13 40 ABuilt-in
  systems   inter face   supply   (ignition   positive).
F14 30 AValvetronic
  supply   (VTi).
F15 10 ARight-hand
  main   beam   headlamps.
F16 10 ALeft-hand
  main   beam   headlamps.
F17 15 ALeft-hand
  dipped   beam   headlamps.
F18 15 ARight-hand
  dipped   beam   headlamps.
F19 15 AOxygen
  sensors   and   electrovalves   (VTi),   electrovalves  
(

Diesel),   EGR   electrovalve   (Diesel).
F20 10 APumps,
  electronic   thermostat   (VTi),   timimg   electrovalve  
(

THP),   water   in   fuel   sensor   (Diesel).
F21 5 AFan
  assembly   control   supply,   ABS/ESP,   turbo   pump   (THP).
Practical information

Energy economy modeSystem which manages the period of use of certain functions to conserve a sufficient level of charge in the battery.
A fter   the   engine   has   stopped,   you   can   still   use   functions   such   as   the   audio   equipment,   windscreen   wipers,   dipped   beam   headlamps,   courtesy   lamps,  
e

tc.   for   a   maximum   combined   period   of   thirty   minutes.
This
  period   may   be   greatly   reduced   if  
t

he   battery   is   not   fully   charged.
A
  flat   battery   prevents   the   engine   from  
s

tarting   (refer   to   the   corresponding  
par

agraph).
If
  the   telephone   is   being   used   at   the  
s

ame   time   on   the   eMyWay   audio  
n

avigation   system,   it   will   be   interrupted  
a

fter   10   minutes.
Switching to economy mode
Once this period has elapsed, a message appears   on   the   multifunction   screen   indicating  
t

hat   the   vehicle   has   switched   to   economy   mode  
a

nd   the   active   functions   are   put   on   standby.
Exiting economy mode
These functions are reactivated automatically the   next   time   the   vehicle   is   driven.
F
 
I
n   order   to   resume   the   use   of   these  
f

unctions   immediately,   start   the   engine   and  
l

et   it   run   for   a   few   minutes.
The
  time   available   to   you   will   then   be   double  
t

he   period   for   which   the   engine   is   left   running.  
H

owever,   this   period   will   always   be   between  
f

ive   and   thirty   minutes.

10
327
CONFIGURATION
Press SETUP to display the "Configuration "
  menu. Select "Choose colour"
  and   confirm   to  
select

  the   screen   colour   harmony   and  
the

  map   presentation   mode:
-  day   mode,
-  night   mode,
-
 
automatic
  day/night   mode,  
according

  to   whether   the  
headlamps

  are   on.
Select "Adjust luminosity "
  and   confirm  
to

  adjust   the   screen   brightness.
Press "OK"
  to   save   the   changes.
The
  settings   for   day   and   night   are  
independent.
Select "

Display configuration "
  and  
confirm.
display configuration