2015 CITROEN DS3 CABRIO DAG display

04
299
DS3_en_Chap13b_RT6-2-8_ed01-2014
Male voice / Female voicePress SETUP to display the
configuration
  menu.
Select "Select male voice" or "Select
female voice"
  then   confirm   "Ye s" to
activate
  a   male   or   female   voice.  
The
 
system

  restarts.
Select "Voice synthesis"
  and   confirm.
NAVIGATION - GUIdANcE

05
DS3_en_Chap13b_RT6-2-8_ed01-2014
Access to the "TRAFFIc INFORMATION " menu
List of TMC  messages   in   order  of
  distance   from   the   vehicle.
Go
  from   the   list   to   the   menu   (left/right).
"Traffic information"
"Geographic filter "
"Select TM c station"
(automatic,
  manual)
"
d isplay/ d o not display
messages "
or
Press "TRAFFI
c
".
TRAFFIc INFORMATION

05
301
DS3_en_Chap13b_RT6-2-8_ed01-2014
configure the filtering and display of TMc messages
TMC (Traffic Message Channel) messages with GPS Navigation provide traffic information in real time.
Press the TRAFFI c button to display the
"Traffic information"
  menu.
Select the "Geographic filter" function
and
  confirm. The
  system   offers   a   choice   of:
-
"Retain all the messages",
or
-
"Retain the messages"
●
 
"
Around the vehicle",
  (confirm  
the

  mileage   to   modify   and   select  
the distance),
●

 
"
On the route".
Confirm
  "OK"   to   save   the   modifications.
We
  recommend:
-
 
a
  filter   on   the   route   and
-
 
a
  filter   around   the   vehicle   of:
-
 
12
  miles   (20   km)   in   urban   areas,
-
 
30
  miles   (50   km)   on   motorways.
TRAFFIc INFORMATION

05
DS3_en_Chap13b_RT6-2-8_ed01-2014
Principal TMc symbols
Red and yellow triangle: traffic information, for example:
Black   and   blue   triangle:   general   information,   for   example:
Weather reports
Modified
  signage
Risk
  of   explosion Traffic
  reports
Narrow   carriageway
Road closed
Wind
Slippery surface
Demonstration Fog
a

ccident
Danger
Parking
Delay
No entry Snow
  /   ice
Roadworks
Traffic
  jam
Receiving TA messages
The TA (Traffic  Announcement)   function   gives   priority   to  T A  alert  messages.
 T o   operate,   this   function   needs   good   reception   of   a  
radio

  station   transmitting   this   type   of   message.   When   a   traffic   report  
is

  transmitted,   the   current   audio   source   (Radio,   CD,   USB,   ...)   is  
interrupted

  automatically   to   play   the  
T
A
 
message.   Normal   playback  
of

  the   audio   source   resumes   at   the   end   of   the   transmission   of   the  
message.Press

RA d IO   to   display   the   menu.
Select "Service announcements" then
confirm.
a

ctivate or deactivate "TA "
  then   confirm.
The
  volume   setting   for  
T
A
 
messages   can   be   adjusted   only   during   the  
transmission

  of   this   type   of   alert.
Activate
  or   deactivate   the   function   at   any   time   by   pressing  
the

  button.
During
  a   message,   press   the   button   to   interrupt   it.
TRAFFIc INFORMATION

06
303
DS3_en_Chap13b_RT6-2-8_ed01-2014
Access to the "TELEPHONE" menu
"Telephone"" d ial"
"
d irectory of contacts"
"
c ontacts management "
"Phone functions "
"Bluetooth functions "
"Hang up "
Go
  from   the   list   to   the   menu   (left/right).
or
List of recent calls sent and
received with the telephone
connected
 
to
 
the
 
system.
Press
 
this
 
button.
To
 
make
 
a
 
call,
 
select
 
a
 
number
 
in
 
the
 
list
 
and
 
confirm
 
" OK"
to
 
start
 
the
 
call.
Connecting
 
a
 
different
 
telephone
 
deletes
 
the
 
list
 
of
 
recent

 
calls. No
  telephone   connected.
Telephone
  connected.
Incoming
  call.
Outgoing
  call.
Synchronisation of
contacts
  in   progress.
Telephone call in
progress.
In the top bar of the permanent
display
USING THE TELEPHONE

06
DS3_en_Chap13b_RT6-2-8_ed01-2014
USING THE TELEPHONE
Pairing a Bluetooth telephone
First connectionFor reasons of safety and because they require prolonged attention on  the   part   of   the   driver,   the   operations   for   pairing   the   Bluetooth  
mobile

  telephone   to   the   hands-free   system   of   the   audio   unit   must   be  
carried out with the vehicle stationary

.
In
 
the
 
Bluetooth
 
menu
 
of
 
your
 
telephone,
 
select
 
the
 
name

 
"C
ITR
o
ËN
"
 
from
 
the
 
list
 
of
 
devices
 
detected. Press
  this   button.
Select "Bluetooth functions " and
confirm.
Select "Peripherals search " and
confirm.
The list of peripheral devices detected
is
  displayed.   Wait   until   the   " c onnect"
button
  is   available.
You
 
can
 
check
 
the
 
compatibility
 
of
 
your
 
telephone
 

at

 
www.citroen.co.uk
 
(services).
a

ctivate the telephone's b luetooth function
and ensure that it is "visible to all" (telephone
configuration).
Quick procedure from the telephone
Enter
 
a
 
minimum
 
4
 
figure
 
code
 
in
 
the
 
telephone
 
and
 
confirm. Enter

 
the
 
same
 
code
 
in
 
the
 
system,
 
select "

OK"
 
and
 
confirm. Procedure from the system

06
DS3_en_Chap13b_RT6-2-8_ed01-2014
USING THE TELEPHONE
directory configuration / Synchronisation with the telephone
Press PHONE then select "contacts
management "   and   confirm.
Select "New contact" to enter a new
contact.
Select "Sort by Name/First name" or
"Sort by First name/Name" to choose
the
  order   in   which   they   appear.
Select "
d elete all contacts" to delete
the
  contacts   saved   in   the   system. Select "Synchronization options
":
-
 
No
  synchronization:   only   the  
contacts

  saved   in   the   system  
(always

  present).
-
 
Display
  telephone   contacts:   only   the  
contacts

  saved   in   the   telephone.
-
 
Display
  SIM   card   contacts:   only   the  
contacts

  saved   on   the   SIM   card.
-
 
Display
  all   phone   contacts:  
contacts on the SIM card and in the
telephone.
Select "

Import all the entries"   to   import  all the contacts in the telephone and
save
  them   in   the   system.
Once
  imported,   a   contact   remains   visible  
whatever

  telephone   is   connected.
Select "
c ontact mem. status" to see the
number
  of   contacts   saved   in   the   system  
or

  imported,   and   the   free   memory.

06
309
DS3_en_Chap13b_RT6-2-8_ed01-2014
USING THE TELEPHONE
calling a recently entered numberPress TEL, select " c all list" and
confirm,
Select
  the   desired   number   and   confirm.
To
  erase   the   calls   log,   press  
PHONE
twice, select "Phone
functions"
  and   confirm   then   select   " d elete calls log"   and   confirm.
Ending a call
Press PHONE then select "OK" to end
the  call.
Or
  make   a   long   press   on   TEL at the
steering
  mounted   controls.
Or
  make   two   short   presses   on   TEL at
the
  steering   mounted   controls.
o

r press the MO d E   button,   as   many  
times

  as   necessary,   until   the   telephone  
screen

  is   displayed.
Press PHONE
 
to
 
display
 
the
 
calls
 
log.
or
Press "OK"
  to   display   the   contextual  
menu

  then   select   "Hang up" and
confirm.
It
 
is
 
always
 
possible
 
to
 
start
 
a
 
call
 
directly
 
from
 
the
 
telephone;
 
park
 
the

 
vehicle
 
as
 
a
 
safety
 
measure.