2015 CITROEN DS3 CABRIO DAG ignition

deactivation
In exceptional conditions (starting a vehicle which   is   bogged   down,   stuck   in   snow,   on   soft  
g

round...),   it   may   be   advisable   to   deactivate   the  
A

SR   and   ESP   systems,   so   that   the   wheels   can  
m

ove   freely   and   regain   grip.
F

P
ress the "ESP OFF" button, located on
the
  left   below   the   steering   wheel.
Illumination
  of   the   lamp   in   the   button   indicates  
t

hat  
t
he  
A
SR  
a
nd  
ES
P  
s
ystems  
a
re  
d
eactivated.
Reactivation
These systems are reactivated automatically each   time   the   ignition   is   switched   back   on   or  
f

rom   30   mph   (50   km/h)   except   1.6   litre  
(THP 150, THP 155 and THP 160) and
R ACING
  petrol   engines.
F

P
ress the "ESP OFF"   button   again   to  
r

eactivate
 t
hem
 ma
nually.
Operating fault
The ESP/ASR systems offer exceptional  s afety  i n  n ormal  d riving,  b ut  
t

his   should   not   encourage   the   driver   to  
t

ake   extra   risks   or   drive   at   high   speed.
The
  correct   functioning   of   these  
s

ystems   depends   on   observation   of   the  
ma

nufacturer's
 r
ecommendations
 o
n:
-
 
w
heels   (tyres   and   rims),
-
 
b
raking   components,
-
 el

ectronic
 c
omponents,
-
 
a
ssembly   and   repair   procedures.
After
  an   impact,   have   these   systems  
c

hecked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Illumination
  of   this   warning   lamp   in  
t

he   instrument   panel   and   the   lamp   in  
t

he "ESP OFF"   button,   accompanied  
b

y   an   audible   signal   and   a   message  
i

n
 
the
 
multifunction   screen,   this   indicates   a  
m

alfunction   of   these   systems.
Have
 
it   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.

deactivation
The system is deactivated in the vehicle configuration   menu,   accessible   with   the   ignition   on.
Its state is memorised when the ignition is switched   off.
When
  the   system   is   deactivated,   a  
m

essage   is   displayed   every   time   the  
i

gnition   is   switched   on,   to   warn   you.
With the monochrome screen c
F Press the MENU button for access to the
main   menu.
F

Sel
ect "Personalisation-
co

nfiguration".
F

Sel
ect "
def
ine vehicle parameters ".
F

Sel
ect "
dr
iving assistance ".
F

Select " Automatic emergency braking: OFF "
or " Automatic emergency braking : ON".
F Press the " 7" or " 8"   button   to   check   or  u
ncheck   the   box   and   respectively   activate  
o

r   deactivate   the   system.
F

P
ress the " 5" or " 6" button, then the OK
button to select the "OK"
 

box   and   confirm  
o

r the Back
 
button   to   cancel.
With the colour screen
F Press the SETUP button .
F Sel ect "Vehicle parameters " and press
the
  knob   to   confirm.
F

Sel
ect "
dr
iving assistance " and press the
knob
  to   confirm.
F

Select " Automatic emergency braking: OFF "
or " Automatic emergency braking: ON ".
F Check  or   uncheck   the   box   to   activate   or  d
eactivate   the   system.
F
 
P
ress   the   knob   to   confirm.

Seat belts
Front seat belts
The front seat belts are fitted with a
pretensioning  and   force   limiting   system.
This
  system   improves   safety   in   the   front  
s

eats   in   the   event   of   a   front   or   side   impact.  
D

epending   on   the   severity   of   the   impact,   the  
p

retensioning   system   instantly   tightens   the   seat  
b

elts   against   the   body   of   the   occupants.
The
  pretensioning   seat   belts   are   active   when  
t

he   ignition   is   on.
The
  force   limiter   reduces   the   pressure   of   the  
s

eat belt on the chest of the occupant, so
improving
  their   protection.
Fastening
F Pull  the   strap,   then   insert   the   tongue   in   the  buc
kle.
F
 
C
heck   that   the   seat   belt   is   fastened  
c

orrectly   by   pulling   the   strap.
Unfastening
F Press  the   red   button   on   the   buckle.
F  G uide   the   seat   belt   as   it   is   reeled   in.
Seat belt not fastened /
unfastened warning lamp
When the ignition is switched on, this warning   lamp   comes   on   in   the   instrument p

anel,   if   the   driver   and/or   the   front
 p

assenger   has   not   fastened   their   seat   belt.
From approximately 12 mph (20 km/h) this   warning   lamp   flashes   for   two   minutes  
a

ccompanied   by   an   audible   signal   of   increasing  
v

olume.   Once   these   two   minutes   have   elapsed,  
t

his   warning   lamp   remains   on   until   the   driver  
a

nd/or   the   front   passenger   fastens   their  
seat
  belt.

165
DS3_en_Chap08_securite_ed01-2014
Airbags
System designed to contribute towards improving   the   safety   of   the   occupants   (with  
t

he   exception   of   the   rear   centre   passenger)  
i

n   the   event   of   violent   collisions.   The   airbags  
s

upplement   the   action   of   the   force-limiting  
s

eat   belts   (with   the   exception   of   the   centre   rear  
p

assenger).
If a collision occurs, the electronic detectors
record
  and   analyse   the   front   and   side   impacts  
s

ustained   in   the   impact   detection   zones:
-
 
i
n   the   case   of   a   serious   impact,   the   airbags  
a

re deployed instantly and contribute
towards better protection of the occupants
of
  the   vehicle   (with   the   exception   of   the  
r

ear   centre   passenger);   immediately   after  
t

he   impact,   the   airbags   deflate   rapidly   so  
t

hat   they   do   not   hinder   visibility   or   the   exit  
o

f the occupants,
-
 
i
n   the   case   of   a   minor   or   rear   impact   or   in  
c

ertain   roll-over   conditions,   the   airbags  
m

ay   not   be   deployed;   the   seat   belt  
a

lone   contributes   towards   ensuring   your  
p

rotection   in   these   situations. This
  equipment   will   only   deploy   once.  
I

f   a   second   impact   occurs   (during   the  
s

ame   or   a   subsequent   accident),   the  
a

irbag   will   not   be   deployed   again.
Impact detection zones
A. Front  impact   zone.
B. S ide   impact   zone.
Deployment
  of   one   or   more   of   the  
a

irbags   is   accompanied   by   a   slight  
e

mission   of   smoke   and   a   noise,   due  
t

o the activation of the pyrotechnic
cartridge
  incorporated   in   the   system.
This
  smoke   is   not   harmful,   but   sensitive  
i

ndividuals   may   experience   slight  
ir

ritation.
The noise of detonation related to the
deployment
  of   one   or   more   airbags  
m

ay   result   in   a   slight   loss   of   hearing   for  
a

  short   time.
The airbags do not operate when the
ignition is switched off.
Safety

167
DS3_en_Chap08_securite_ed01-2014
deactivation
Only the passenger's front airbag can be deactivated:
F

w
ith the ignition off ,
  insert   the   key   in   the  
p

assenger   airbag   deactivation   switch,
F

t
urn it to the "OFF" position,
F
 
t
hen,   remove   the   key   keeping   the   switch   in  
t

he   new   position.
This
  warning   lamp   comes   on   in   the
 i

nstrument   panel   when   the   ignition   is
 o

n   and   until   the   airbag   is   re-activated.To assure the safety of your child,
the
  passenger's   front   airbag   must  
b

e deactivated when you install a
"rear   facing"   child   seat   on   the   front  
p

assenger
 sea
t.
Other wise,   the   child   would   risk   being  
s

eriously   injured   or   killed   if   the   airbag  
w

ere   deployed.
Reactivation
When you remove a child seat that has b
een   fitted   "rear wards   facing",   turn   switch   to  
t

he "ON"
 
position   to   re-activate   the   airbag   and  
s

o   assure   the   safety   of   your   front   passenger   in  
t

he   event   of   an   impact.
Operating fault
If this warning lamp comes on in the instrument   panel,   you   must   contact  
a C

ITR
oË
N dealer or qualified
workshop
  to   have   the   system  
c

hecked.   The   airbags   may   no   longer  
b

e deployed in the event of a serious
impact.
Safety

DS3_en_Chap10_info-pratiques_ed01-2014
Fuel tankFuel tank capacity: approximately 50 litres (petrol) or 46 litres (diesel) or 33 litres (LPG); (de pending on version: approximately 30 litres
(petrol or d iesel)).
Low fuel level
Filling
A label affixed to the inside of the flap reminds you   of   the   type   of   fuel   to   be   used   depending   on  
y

our
 eng
ine.
Additions
  of   fuel   must   be   of   at   least   7   litres,   in  
o

rder   to   be   registered   by   the   fuel   gauge.The
  key   cannot   be   removed   from   the  
l

ock   until   the   cap   is   refitted.
Opening
  the   filler   cap   may   create   a  
n

oise   caused   by   an   inrush   of   air.   This  
v

acuum   is   entirely   normal,   resulting  
f

rom   the   sealing   of   the   fuel   system.
To
  fill   the   tank   safely:
F

t
he engine must be switched off,
F

o
pen the fuel filler flap,
F
 
i
nsert   the   key   in   the   cap,   then   turn   it   to   the  
l

eft,F
 r emove   the   cap   and   hook   it   onto   the   clip  
l

ocated on the inside of the flap,
F
 
f
ill   the   tank,   but do not continue after the
3rd cut- off of the pump ;
  this   could   cause  
m

alfunctions.
When
  you   have   filled   the   tank:
F
 
p
ut   the   cap   back   in   place,
F
 
t
urn   the   key   to   the   right,   then   remove   it  
f

rom   the   cap,
F
 
c
lose   the   flap.
When
  the   fuel   tank   minimum   level  
i

s   reached   this   warning   lamp   comes  
o

n   on   the   instrument   panel.   When   it  
f

irst   comes   on   there   remains   approximately
5 litres   of   fuel   in   the   tank.
You   must   refuel   as   soon   as   possible   to   avoid  
r

unning   out   of   fuel.
If you run out of fuel (Diesel), refer also to the
"Checks"
 s
ection.
With Stop & Start, never refuel with the
system   in   STOP   mode;   you   must   switch  
o

ff   the   ignition   with   the   key.

193
DS3_en_Chap10_info-pratiques_ed01-2014
Running out of fuel (Diesel)If your vehicle is fitted with an HDI engine, the fuel system must be primed if you run out of fuel.
T his   system   consists   of   a   priming   pump   and   a   transparent   pipe   under   the   bonnet.
F
 
F
ill   the   fuel   tank   with   at   least   five   litres   of  
D

iesel.
F
 
O
pen   the   bonnet.
F
 
D
epending   on   version,   unclip   the   cover   to  
g

ain   access   to   the   priming   pump.
F
 
S
queeze   and   release   the   priming   pump  
u

ntil   resistance   is   felt   (could   be   from   the  
f

irst application) and fuel appears in the
transparent
  pipe   with   the   green   connector.
F
 
O
perate   the   starter   until   the   engine   starts.
F
 
D
epending   on   version,   put   the   cover   back  
i

n   position   and   clip   it   in   place.
F
 
C
lose   the   bonnet.
BlueHdi 100 engines
F Fill  the   fuel   tank   with   at   least   five   litres   of  D
iesel.
F
 
S
witch   on   the   ignition   (without   starting   the  
e

ngine).
F

W
ait around 6 seconds and switch off the
ignition.
F
 
R
epeat   the   operation   10   times.
F
 
O
perate   the   starter   to   run   the   engine.
If
 
the
 
engine
 
does
 
not
 
start
 
at
 
the
 
first
 
a

ttempt,
 
do
 
not
 
try
 
again.
Operate
 
the
 
priming
 
pump
 
again,
 
then
 
t

he
 
starter.
Practical information

195
DS3_en_Chap10_info-pratiques_ed01-2014
Range indicators
When switching on the ignition, an indicator gives   an   estimate   of   the   distance   that   can  
b

e   travelled   with   your   vehicle   before   engine  
s

tarting   is   automatically   prevented,   once   the  
v

ehicle   starts   using   the   reserve   of   AdBlue
® or
after
 
a
 
fault
 
is
 
detected
 
with
 
the
 
SCR
 
system.
In
 
the
 
event
 
of
 
simultaneous
 
system
 
fault
 
and  
l

ow
a
d
blu

e
® level, the shortest range is the one d
isplayed. The
  engine   start   prevention   system  
r

equired   by   regulations   is   activated  
a

utomatically   once   the   AdBlue
® tank i
s
 
empty.
In the event of the risk of non-starting related to a lack of AdBlue®
Range greater than 1 500 miles (2 400 km)
When   the   ignition   is   switched   on,   no  
i

nformation   on   range   is   displayed   automatically  
i

n   the   instrument   panel.
Practical information