2015 CITROEN DS3 CABRIO DAG key

237
DS3_en_Chap10_info-pratiques_ed01-2014
F On  the   front   bumper,   unclip   the   cover   by  p
ressing   at   the   bottom.
F
 
S
crew   the   towing   eye   in   fully.
F
 
I
nstall   the   towing   bar.
F
 
P
lace   the   gear   lever   in   neutral   (position   N
for
  an   electronic   or   automatic   gearbox). F
 O n   the   rear   bumper,   unclip   the   cover   by  p
ressing   at   the   bottom.
F
 
S
crew   the   towing   eye   in   fully.
F
 
I
nstall   the   towing   bar.
F
 
S
witch   on   the   hazard   warning   lamps   on  
b

oth   vehicles.
F
 
M
ove   off   gently   and   drive   for   a   short  
d

istance
 o
nly.
Towing your vehicleTowing another vehicle
Failure to observe this special condition
could
  result   in   damage   to   certain  
c

omponents   (braking,   transmission...)  
a

nd   the   absence   of   braking   assistance  
t

he   next   time   the   engine   is   started.
F
 
U

nlock   the   steering   by   turning   the   key   one  
n

otch   in   the   ignition   switch   and   release   the  
par

king
 b
rake.
F
 
S

witch   on   the   hazard   warning   lamps   on  
b

oth   vehicles.
F
 
M

ove   off   gently   and   drive   for   a   short  
d

istance
 o
nly.
Practical information

06
DS3_en_Chap13b_RT6-2-8_ed01-2014
USING THE TELEPHONE
Press PHONE twice.
Select " d ial"   then   confirm. Select "
d irectory of contacts" then
confirm.
Dial
  the   telephone   number   using   the  
virtual

  keypad   selecting   each   number  
in

  turn.
Confirm
  "OK"   to   make   the   call. Press TEL or twice on PHONE.
c

alling a new number
c
alling a contact
Select   the   desired   contact   and   confirm.
If access was via the PHONE button,
select "
c all"   and   confirm.
Select
  the   number   and   confirm   to   start  
the

  call.
Making a callUse of the telephone is not recommended while driving. We recommended  that   you   park   safely   or   make   use   of   the   steering  
mounted

  controls.

06
3 11
DS3_en_Chap13b_RT6-2-8_ed01-2014
Options during a call*
During a call, press the MOd E button
several   times   to   select   display   of   the  
telephone screen, then press "OK

" to
open
  the   contextual   menu.
Select "Private mode"
  and   confirm   to  
take

  the   call   on   the   handset.
o

r select "Hands-free mode" and
confirm
  to   take   the   call   via   the   vehicle's  
speakers.
Select "

Put call on hold "
  and   confirm   to  
put

  the   current   call   on   hold.
o

r select "Resume the call" and
confirm
  to   resume   the   call   on   hold. Select "
d TMF ring tones
" to use the
numerical   keypad,   so   as   to   navigate  through
  the   menu   of   an   interactive   vocal  
server

.
Select "Hang up"
  to   end   the   call.
*
  Depending   on   the   compatibility   of   the   phone   and   your   service   plan.
it is possible to hold a 3-way conference
call
  by   making   2   calls   in   succession*.  
Select "

c onference mode call" in the
contextual
  menu   accessible   using   this  
button.
Or

  make   a   short   press   on   this   button.
USING THE TELEPHONE

07
315
DS3_en_Chap13b_RT6-2-8_ed01-2014
Press the button on the numerical keypad to recall a preset  station.
Or
  press   then   turn   the   thumb   wheel   at   the   steering  
mounted

  controls.
Presetting a station
After selecting a station, press one of the buttons on  the   numerical   keypad   for   2   seconds   to   preset   the  
current

  station.
An
  audible   signal   confirms   that   the   station   has   been  
preset. Press

RA d IO.
Activate / d
eactivate R d S
RDS, if activated, allows you to continue listening to the same station
  by   automatic   retuning   to   alternative   frequencies.   However,  
in

  certain   conditions,   coverage   of   an   RDS   station   may   not   be  
assured

  throughout   the   entire   country   as   radio   stations   do   not  
cover

  100   %   of   the   territory.  
This
  explains   the   loss   of   reception   of  
the

  station   during   a   journey.
Select "Guidance options " then
confirm.
a

ctivate or deactivate "R d S" then
confirm.
RAdIO

08
317
DS3_en_Chap13b_RT6-2-8_ed01-2014
cd, MP3 cd / USB player
The audio equipment will only play audio files with ".wma, .aac, .flac, .ogg  and   .mp3"   file   extensions   and   with   a   bit   rate   of   between   32   Kbps  
and

  320   Kbps.
It
  also   supports   VBR   (Variable   Bit   Rate)   mode.
No
  other   type   of   file   (.mp4,   .m3u...)   can   be   played.
WMA
 

files   must   be   of   the   standard   wma   9   type.
The
  sampling   rates   supported   are   greater   than   32   KHz.
It
  is   advisable   to   restrict   file   names   to   20   characters,   without   using   of  
special

  characters   (e.g.:   "   "   ?   ;   ù)   to   avoid   any   playing   and   displaying  
problems.
In

  order   to   be   able   to   play   a   recorded   CDR   or   CDRW,   when   recording  
it

  is   preferable   to   select   the   ISO   9660   level   1,   2   or   Joliet   standard.
If
  the   disc   is   recorded   in   another   format   (udf, ...),   it   may   not   be   played  
correctly

.
It
  is   recommended   that   the   same   recording   standard   is   always   used  
for

  an   individual   disc,   with   as   low   a   speed   as   possible   (4x   maximum)  
for

  optimum   sound   quality.
In
  the   particular   case   of   a   multi-session   CD,   the   Joliet   standard   is  
recommended.Information and advice
The
  system   supports   USB   mass   storage   or   iPod  
devices

  via   the   USB   port   (suitable   cable   not   supplied).
If
  a   partitioned   USB   memory   key   is   connected   to   the  
system,

  only   the   first   partition   is   recognised.
Control of the peripheral device is with the audio
system
  controls.
The
  number   of   tracks   is   limited   to   2000   maximum,  

999

  tracks   per   folder.
If
  the   current   consumption   at   the   USB   port   exceeds  
500

  mA,   the   system   goes   into   protection   mode   and  
deactivates

  the   port.
Other
  peripherals,   not   recognised   on   connection,   must  
be

  connected   to   the   auxiliary   socket   using   a   Jack   cable  
(not

  supplied).
Give
  preference   to   multimedia   USB   memory   sticks   (in   general  
formatted

  FAT
 
32   File  
Allocation
 
T
able).
The
  system   does   not   support   the   operation   of   an  
Apple® player and a
USB
 
memory
 
stick
 
connected
 
at
 
the
 
same
 
time.
It
 
is
 
recommended
 
that
 
official
 
Apple® USb cables are used to ensure
correct
 
operation.
MUSIc MEdIA PLAYERS

06
345
DS3_en_Chap13c_RD45_ed01-2014
BLUETOOTH FUNcTIONS
For safety reasons and because they require prolonged attention on  the   part   of   the   driver,   the   operations   for   pairing   of   the   Bluetooth  
mobile

  telephone   with   the   Bluetooth   hands-free   system   of   your  
audio

  equipment   must   be   carried   out   with   the   vehicle   stationary  
and

  the   ignition   on.
Press
  the   MENU   button.
A
 

window   is   displayed   with   a   message   that   a   search   is   in   progress.
a
ctivate the telephone's b luetooth function
and ensure that it is "visible to all" (telephone
configuration).
In
  the   menu,   select:
-
b luetooth telephone function -
a

udio
-
 
Bluetooth
  configuration
-
 
Perform
  a   Bluetooth   searchThe
  services   offered   depend   on   the   network,   the   SIM   card   and   the  
compatibility

  of   the   Bluetooth   equipment   used.
Consult   your   telephone's   manual   and   your   operator   to   find   out   which  
services

  are   available   to   you.
Bluetooth telephoneScreen c
The

 
TELEPHONE
  menu   permits   access   to   the   following   functions  
in

  particular:   Directory*,   Call   list,   Pairing   management.
The
  first   4   telephones   recognised   are   displayed   in   this   window.
A
 

virtual   keypad   is   displayed   in   the   screen:
 enter

  a   code   with   at   least   4   digits.
Confirm
  by   pressing   OK.
A
 

message   that   the   pairing   has   been   successful   appears   in   the  
screen. Select
  the   telephone   to   be   connected   from   the   list.   Only   one  
telephone

  can   be   connected   at   a   time.
A
 

message   is   displayed   in   the   screen   of   the  
telephone

  chosen.  
T
o   accept   the   pairing,   enter   the  
same

  code   on   the   telephone,   then   confirm   with   OK.
The
  automatic   connection   authorised   is   only   active   after   the  
telephone

  has   been   configured.
The directory and the call list can be accessed after the
synchronisation
  period.
(Available according to model and version)
*
  If   your   telephone   is   fully   compatible.
If
  pairing   fails,   the   number   of   attempts   is   not   limited.
Go
  to   www.citroen.co.uk   for   more   information   (compatibility,   more  
help,

  ...).
Pairing a telephone / First connection

06
DS3_en_Chap13c_RD45_ed01-2014
Receiving a callAn   incoming   call   is   announced   by   a   ring   and   a   superimposed  
display

  in   the   vehicle's   screen.
Select the YES tab on the display
using
  the   buttons   and   confirm   by  
pressing

  OK.
Press
  this   button   to   accept   the   call. Making a call
From   the   Bluetooth   telephone   function  
Audio
  menu,   select   Manage  
the

  telephone   call   then   Call,   Call   list   or   Directory.
Press
  this   button   for   more   than   two   seconds   for  
access

  to   your   directory,   then   navigate   with   the  
thumb

  wheel.
o

r
To
  dial   a   number,   use   your   telephone's   keypad,  
with

  the   vehicle   stationary.
BLUETOOTH FUNcTIONS
The system accesses the telephone's contacts directory, depending on  compatibility,   and   while   the   Bluetooth   connection   with   it   is  
maintained.
With certain telephones connected by

b luetooth you can send a
contact
  to   the   directory   of   the   audio   system.
Contacts
  imported   in   this   way   are   saved   in   a   permanent   directory  
visible

  to   all,   whatever   the   telephone   connected.
The
  menu   for   the   directory   is   not   accessible   if   it   is   empty.

06
347
DS3_en_Chap13c_RD45_ed01-2014
Initiate the pairing between the telephone and the  vehicle.  This   pairing   can   be   initiated   from  
the

  vehicle's   telephone   function   menu   or   via   the  
telephone's

  keypad.   Refer   to   the   steps   in   "Pairing  
a

  telephone"   on   the   previous   pages.   During   the  
pairing

  phase,   the   vehicle   must   be   stationary   with  
the

  key   in   the   ignition.
Select
  the   telephone   to   be   connected   from   the   telephone   function   menu.
The
  audio   system   connects   to   a   newly   paired   telephone  
automatically

.
Bluetooth audio streaming*
Wireless transmission of music files on the telephone, played via the  audio   equipment.  The   telephone   must   be   able   to   manage   the  
appropriate

  Bluetooth   profiles   (Profiles  
A2DP 
/  
A
VRCP).
*
 
Depending   on   the   compatibility   of   the   telephone.
**
  
In

 
certain   cases,   playing   of   the  
Audio
  files   must   be   initiated   from   the  
keypad.
***

 
If
 
the   telephone   supports   the   function.
Activate
  the   streaming   source   by  
pressing

  the   SOURCE   button**.  
The

  tracks   to   be   played   can   be  
controlled as usual via the buttons on
the

  audio   system   control   panel   and  
the

  steering   mounted   controls***.  
The

  contextual   information   can   be  
displayed

  on   the   screen.
During
 
a
 
call,
 
press
 
this
 
button
 
for
 
more
 
than
 
2

 
seconds.
Confirm
 
with
 
OK
 
to
 
end
 
the
 
call.
Ending a call
BLUETOOTH FUNcTIONS