2015 CITROEN DS3 CABRIO DAG navigation

04
DS3_en_Chap13b_RT6-2-8_ed01-2014
Adding a stage
Press N AV to display the
"Navigation - guidance "
  menu.
Select "Journey leg and route " then
confirm.
Select "
c lose to"   a   route   passing  
close

  to   the   stage   or   "Strict" for a route
passing
  through   the   stage.
Confirm
  "OK"   to   start   the   guidance,   and  
give

  a   general   indication   of   the   guidance  
route. Select "
Add a stage"   then   confirm.
The
  address   of   the   stage   is   entered   as  
a destination, by "

Enter an address",
a contact in "
d irectory", or "Previous
destinations".
Organising stages
To organise stages, carry out operations 1   to   2   again,   then   select   "Order/delete
journey legs"
  and   confirm.
Select
  and   confirm   to   save   the  
modifications. Select
  the   stage   that   you   want   to   move  
in

  the   order.
Select "
d
elete"   to   delete   the   stage.
NAVIGATION - GUIdANcE

04
295
DS3_en_Chap13b_RT6-2-8_ed01-2014
Route options
calculation criteriaSelect " Guidance options "
  and   confirm. Select "OK"
  and   confirm   to   save   the  
modifications.
Select "

Define calculation criteria" and
confirm.
This
  function   allows   modification   of:
-
 
the
  guidance   criteria:   ("Fastest
route", "Shortest route",
"
d istance/Time"),
-
 
the
  exclusion   criteria:   ("With tolls "
or "With Ferry"),
-
 
traffic
  avoidance:   ("Traffic info").
Press N AV
to display the
"Navigation - guidance "
  menu.
If
  traffic   avoidance   (Traffic   info)   is   selected,   the   system   suggests  
an

  alternative   route   if   there   is   a   delay   on   the   guidance   route.
NAVIGATION - GUIdANcE

04
DS3_en_Chap13b_RT6-2-8_ed01-2014
Press N AV to display the
"Navigation - guidance "
  menu.
Map management
Selecting the points of interest displayed on the map
Select "Map management"   and   confirm. Select
  from   the   various   categories   the  
ones that you want to display on the
screen.
Select "

Map details"   and   confirm. Select "
d efault" to have only "Filling stations, garages" and
"Risk areas "
  appear   on   the   map   (if   installed   in   the   system).
Select "OK"
  then   confirm   and   select  
"

OK"   again   then   confirm   to   save   the  
modifications.
NAVIGATION - GUIdANcE

04
297
DS3_en_Chap13b_RT6-2-8_ed01-2014
Select "Map management" and confirm.Select:
-
"Vehicle direction
"   to   have   the   map  
follow the direction of travel,
-
"North direction
"   to   keep   the   map  
always North up,
-
"Perspective view" to display a
perspective   view.
Select "Map orientation "
  and   confirm. The
  colour   of   the   map,   different   from   the   day   and   night   mode,   is  configured
  in   the   "SETUP"
  menu.
Map orientation
Press N AV to display the
"Navigation - guidance "   menu.
Street   names   are   visible   on   the   map   from   the   100   m   scale.
NAVIGATION - GUIdANcE

04
DS3_en_Chap13b_RT6-2-8_ed01-2014
Press N AV to display the
"Navigation - guidance "
  menu.
Navigation voice synthesis
Select "Guidance options "   and   confirm.
Adjusting the volume / d eactivation
Select "Set speech synthesis" and
confirm. Select
  the   volume   graph   and   confirm.
Select " d eactivate
"   to   deactivate   voice   messages.
Select "OK" and press the dial to
confirm. Adjust   the   volume   to   the   desired   level  
and

  confirm.
The
 
volume   of   messages   can   be   adjusted   during   the   transmission  
of

 
the
 
message   using   the   volume   adjustment   control.
The
 
volume   setting   of   guidance   messages   is   also   accessible   via  
the "

SETUP"   /   "
Voice synthesis"   menu.
NAVIGATION - GUIdANcE

04
299
DS3_en_Chap13b_RT6-2-8_ed01-2014
Male voice / Female voicePress SETUP to display the
configuration
  menu.
Select "Select male voice" or "Select
female voice"
  then   confirm   "Ye s" to
activate
  a   male   or   female   voice.  
The
 
system

  restarts.
Select "Voice synthesis"
  and   confirm.
NAVIGATION - GUIdANcE

05
301
DS3_en_Chap13b_RT6-2-8_ed01-2014
configure the filtering and display of TMc messages
TMC (Traffic Message Channel) messages with GPS Navigation provide traffic information in real time.
Press the TRAFFI c button to display the
"Traffic information"
  menu.
Select the "Geographic filter" function
and
  confirm. The
  system   offers   a   choice   of:
-
"Retain all the messages",
or
-
"Retain the messages"
●
 
"
Around the vehicle",
  (confirm  
the

  mileage   to   modify   and   select  
the distance),
●

 
"
On the route".
Confirm
  "OK"   to   save   the   modifications.
We
  recommend:
-
 
a
  filter   on   the   route   and
-
 
a
  filter   around   the   vehicle   of:
-
 
12
  miles   (20   km)   in   urban   areas,
-
 
30
  miles   (50   km)   on   motorways.
TRAFFIc INFORMATION

11
DS3_en_Chap13b_RT6-2-8_ed01-2014
ScREEN MENU MAP(S)
"Navigation - guidance"
MENU
Enter an address
Select destination
directory
GPS coordinates
Journey leg and route
Add a stage Enter an address
Directory Previous destinations
Order/delete journey legs
d
ivert route
c

hosen destination
Guidance options
Define calculation criteria
d

elete last destinations
Map management
Map orientation
MAIN FUNcTION
Option A1
o
ption a 11
Option A
Option B...
Map details
Move the map
Mapping and updating
d

escription of risk areas database
Stop / Restore guidance
1
2
3
1
3
3
2
2
2
2
1
3
1
1
2
2
2
2
2
2
2
2
2
2
1
1
Set parameters for risk areas2
Fastest route2
Shortest route
d
istance/Time
With tolls2
2
2
With Ferry2
Traffic info2
Set speech synthesis Fastest route
Shortest route
3
3
2
Distance/Time
With tolls3
3
With Ferry
Traffic
  info3
3
3
3
3
North directionVehicle direction
Perspective view