2015 Citroen C4 PICASSO ECU

245
Locations for installing ISOFIX child seats
In accordance with European Regulations, this table indicates the options for installing ISOFIX child seats on seats in the vehicle fitted with ISOFIX mountings.
In
  the   case   of   universal   and   semi-universal   ISOFIX   child   seats,   the   ISOFIX   size   category,   determined   by   a   letter   from   A to G,
  is   indicated   on   the   child  
s

eat   next   to   the   ISOFIX   logo.
*
  Sleeper   cots   cannot   be   fitted   to   the   front   passenger's   seat.**
  
A
n   ISOFIX   sleeper   cot,   secured   to   the   lower   rings   of   an   ISOFIX   seat,  
o

ccupies   the   full   width   of   the   rear   seats.
Weight of the child
  /   indicative   age
Less than 10 kg (group 0)
Up
  to   approx.  
6 m

onthsLess than 10 kg
(group 0)
Less than 13 kg (group 0+)
Up
  to   approx.   1   yearFrom 9 to 18 kg (group 1)
From
  approx.   1   to   3   years
Type of ISOFIX child seat Sleeper cot*rearward facing rearward facing forward facing
ISOFIX size categor y F G C D E C D A B B1
Front
 p

assenger
 sea
t
n
ot IS
o
FIX
Outer
  rear   seats,   fixed IL- SU**IL- SUIL- SUIUF / IL- SU IUF / IL- SU
Outer
 r

ear
 s
eats,
 a
djustable
 l
ongitudinallyIL- SU**IL- SUIL- SUIUF / IL- SU IUF / IL- SU
Centre rear seat XIL- SU IL- SUIUF / IL- SU IUF / IL- SU
Rear
  seat   in   the   3
rd rown ot ISo FIX
6
Safety

246
I UF: seat suitable for the installation of an
ISoFI X Universal seat, " For ward
  facing"  
s

ecured   using   the   upper   strap   to   the   top   tether  
o

n   ISOFIX   seats.
IL- SU: seat suitable for the installation of an
I sofix
  Semi- Universal
 sea

t
 ei
ther:
-
 
r
ear ward   facing   fitted   with   an   upper   strap  
o

r   a   support   leg,
-
 
f
or ward   facing   fitted   with   a   support   leg,
-
 
a
  sleeper   cot   fitted   with   an   upper   strap   or   a  
s

upport   leg.
Remove
  and   stow   the   head   restraint  
b

efore   installing   a   child   seat   on   a  
p

assenger   seat.   Refit   the   head   restraint  
o

nce   the   child   seat   has   been   removed.
For
  advice   on   securing   the   upper   strap,   refer   to  
t

he   "Isofix   Mountings"   section.
X: seat not suitable for the installation of a
child
  seat   or   sleeper   cot   for   the   weight   group  
i

ndicated.
Safety

247
Child seats
The incorrect installation of a child seat in a vehicle   compromises   the   child's   protection   in  
t

he   event   of   an   accident.
Check
  that   there   is   no   seat   belt   or   seat   belt  
b

uckle   under   the   child   seat   as   this   could  
de

stabilise
 i
t.
Remember
  to   fasten   the   seat   belts   or   the  
c

hild   seat   harnesses   keeping the slack in
relation
  to   the   child's   body   to a minimum,
even
  for   short   journeys.
For
  the   installation   of   a   child   seat   using   a  
s

eat   belt,   ensure   that   this   is   well   tensioned  
o

n   the   child   seat   and   that   it   is   holding   the  
c

hild   seat   firmly   against   the   seat   of   your  
v

ehicle.   If   your   front   passenger   seat   is  
a

djustable,   move   it   for ward   if   necessary.
at t

he rear seats, always leave sufficient
space
  between   the   front   seat   and:
-
 
a
  rear ward   facing   child   seat,
-
 
t
he   feet   of   a   child   seated   in   a   for ward  
f

acing   child   seat.
Recommendations
For this, move the front seat for ward and if necessary   straighten   its   backrest.
For
 o

ptimum
 in
stallation
 o
f
 t
he
 fo
rward
 f
acing
 c

hild   seat,   ensure   that   the   back   of   the   child  
s

eat   is   as   close   as   possible   to   the   backrest  
o

f   the   vehicle's   seat,   or   in   contact   if   possible.
The
  head   restraint   must   be   removed   before  
i

nstalling   a   child   seat   with   a   backrest   on   the  
p

assenger
 sea
t.
Ensure
  that   the   head   restraint   is   stowed   or  
a

ttached   securely   so   that   it   is   not   thrown  
a

round   the   vehicle   in   the   event   of   sharp  
b

raking.
Refit
  the   head   restraint   as   soon   as   the   child  
s

eat   is   removed.Installing a booster
cushion
As a safety precaution, do not leave:
-  o ne   or   more   children   alone   and  
u

nsupervised   in   a   vehicle,
-
 
a
  child   or   an   animal   in   a   vehicle   which  
i

s   exposed   to   the   sun,   with   the   windows  
c

losed,
-
 
t
he   keys   within   reach   of   children   inside  
t

he   vehicle.
To
  prevent   accidental   opening   of   the   doors,  
u

se   the   child   lock.
Take
  care   not   to   open   the   rear   windows   by  
m

ore   than   one   third.
To
  protect   young   children   from   the   rays   of  
t

he   sun,   fit   side   blinds   on   the   rear   windows.
The
  chest   part   of   the   seat   belt   must   be  
p

ositioned   on   the   child's   shoulder   without  
t

ouching   the   neck.
Ensure that the lap part of the seat belt
passes   correctly   over   the   child's   thighs.
CITROËN   recommends   the   use   of   a   booster  
s

eat   which   has   a   back,   fitted   with   a   seat   belt  
g

uide   at   shoulder   level.
The
 
legislation
 
on
 
carrying
 
a
 
child
 
on
 
the
 
f

ront
 
passenger
 
seat
 
is
 
specific
 
to
 
each
 
c

ountry.
 
Refer
 
to
 
the
 
legislation
 
in
 
force
 
in
 
t

he
 
country
 
in
 
which
 
you
 
are
 
driving.
Deactivate
 
the
 
passenger's
 
front
 
airbag
 
w

hen
 
a
 
rear ward
 
facing
 
child
 
seat
 
is
 
installed
 
o

n
 
the
 
front
 
passenger
 
seat.
 
Other wise,
 
the
 
c

hild
 
would
 
risk
 
being
 
seriously
 
injured
 
or
 
k

illed
 
if
 
the
 
airbag
 
were
 
deployed.
Children at the front
6
Safety

257
Changing a wheel
The tools are installed in the boot under the fl o o r.
Remove
  the   boot   carpet   for   access   to   them.
Access to the tools
List of tools*
Procedure for changing a wheel with a punctured tyre for the spare wheel using the tools provided with the vehicle.
al

l of these tools are specific to your
vehicle
  and   can   vary   according   to   the   level  
o

f   equipment.   Do   not   use   them   for   other  
p

urposes.
1.
 W

heelbrace.
 F

or   removing   the   wheel   trim   and   removing  
t

he   wheel   bolts.
2.
 C

hock   for   immobilising   the   vehicle   (except  
v

ersions   with   manual   gearbox).
3.
 J

ack   with   integral   handle.
 F

or   raising   the   vehicle.
4.
 W

heel   bolt   cover   removal   tool.
 F

or   removing   the   finishers   on   the   heads   of  
t

he   wheel   bolts   on   alloy   wheels.
5.
 S

ocket   for   the   security   bolts   (located   in   the  
g

love   box).
 F

or   adapting   the   wheelbrace   to   the   special  
"s

ecurity"
 b
olts.
*
  According   to   equipment.
7
Practical information

258
Taking out the wheel
F Unscrew  the   central   green   screw.
F  L ift   the   spare   wheel   towards   you   from   the  
r

e a r.
F
 
R
emove   the   wheel   from   the   boot.as t he spare wheel is narrower than the
wheels on the vehicle, in the event of a
puncture,
  the   punctured   wheel   must   be  
c

arried   in   the   boot.
The
  spare   wheel   is   located   in   the   boot   under  
t

he   floor.
For access to the spare wheel, refer to the
"Access   to   the   tools"   section.
Access to the spare wheel
Putting the spare wheel back in
place
F Return
  the   wheel   to   its   housing.
F U nscrew the central screw a few turns,
then
  put   it   in   place   in   the   middle   of   the  
w

heel.
F
 
F
ully  
t
ighten  
t
he  
c
entral  
s
crew  
t
o  
s
ecure  
t
he  
w

heel   correctly. F
 R eturn   the   box   to   its   position   in   the   middle  o
f   the   wheel.
Practical information

259
Changing a wheelProcedure for changing a wheel with a punctured tyre for the spare wheel using the tools provided with the vehicle.
S
ome
 
of
 
the
 
tools   are   accessible   from   inside  
t

he
 
boot.
The
 
wheel
 
chock   2 as well as the wheelbrace
extension
 6

 
are   stowed   under   the   right   hand  
b

oot
 
sill
 
trim.
The wheelbrace 1
  and   the   towing   eye   7 are
stowed
 
under
 
the   left   hand   boot   sill.
Access to the vehicle's tools*2. Wheel  chock   for   immobilising   the   vehicle  (
except   versions   with   manual   gearbox).
3.
 J

ack   with   integral   handle.
 F

or   raising   the   vehicle.
4.
 W

heel   bolt   head   cover   removal   tool.
 F

or   removing   the   wheel   bolt   head   finishers  
o

n   alloy   wheels.
5.
 S

ocket   for   the   security   bolts   (stowed   in   the  
g

love   box).
 F

or   adapting   the   wheelbrace   to   the   special  
s

ecurity   bolts.
6.
 W

heelbrace
 e
xtension.
 F

or   unscrewing/tightening   the   spare   wheel  
c

arrier   drive.
7.
 T

owing   eye.
Wheel with trim
When removing the wheel ,   detach   the   trim  f
irst   using   the   wheelbrace   1   pulling   at   the   valve  
p

assage   hole.
When refitting the wheel ,
  refit   the   trim  
s

tarting   by   placing   its   notch   facing   the   valve  
a

nd   press   around   its   edge   with   the   palm   of   your  
han

d.
List of tools*
all of these tools are specific to your vehicle
and  can   vary   according   to   equipment.   Do   not  
u

se   them   for   other   purposes.
1.
 W

heelbrace.
 F

or   removing   the   wheel   trim   and   the   wheel  
f

ixing
 bol
ts. *
  
D
epending   on   version.   A   complete   set   of   tools  
i

s   provided   with   the   spare   wheel.
The
 
other
 
tools,
 
the
 
jack
 
3
 
and
 
the
 
tool
 
for
 r
emoving
 
the
 
wheel
 
bolt
 
head
 
finishers
 
for
 
alloy
 w
heels 4 ,
 
are
 
stowed
 
in
 
a
 
box
 
attached
 
to
 
the
 
spar

e
 w

heel.
The
 
assembly
 
is
 
secured
 
under
 
the
 
vehicle
 
in
 
a

 
carrier.
(See
 
the
 
"Access
 
to
 
the
 
spare
 
wheel"
 
section).
7
Practical information

263
Removing a wheel
Parking the vehicle
Immobilise the vehicle where it does not block   traffic:   the   ground   must   be   level,  
s

table   and   not   slippery.
Apply
  the   parking   brake   unless   it   has  
b

een   programmed   to   automatic   mode,  
s

witch   off   the   ignition   and   engage   first  
g

ear*   to   block   the   wheels.
Check
  that   the   braking   warning   lamp  
a

nd   the   P   warning   lamp   in   the   parking  
b

rake   control   lever   come   on.
For
  greater   safety,   place   the   chock   2
against
  the   wheel   opposite   to   the   one  
b

eing
 c
hanged.
The
  occupants   must   get   out   of   the  
v

ehicle   and   wait   where   they   are   safe.
Never
  go   underneath   a   vehicle   raised  
u

sing   a   jack;   use   an   axle   stand.
List of operations
F Remove  the   finisher   from   from   each  o
f   bolts   using   the   tool   4   (depending   on  
e

quipment).
F
 
F
it   the   security   socket   5 on the
wheelbrace


1   to   slacken   the   security   bolt  
(

if fitted).
F
 
S
lacken   the   other   bolts   (no   more   than   a  
1

/4 turn)   using   the   wheelbrace   1  
o
n l y.
*


Position R
 
for
 
an
 
electronic
 
gearbox
 
or
 
P for
an
 
automatic
 
gearbox. Do
  not   use:
-
 
t
he   jack   for   any   purpose   other   than  
l

ifting   the   vehicle,
-
 
a
ny   other   jack   than   the   one  
s

upplied   by   the   manufacturer.
7
Practical information

265
F Remove  the   bolts   and   store   them   in   a   clean  p
lace.
F
 
R
emove   the   wheel.
Fitting a wheel
Fitting the "space-saver"
spare wheel
If your vehicle is fitted with alloy wheels, when   tightening   the   bolts   on   fitting,   it  
i

s   normal   to   notice   that   the   washers  
d

o   not   come   into   contact   with   the  
"

space-saver"   spare   wheel.   The   wheel  
i

s   secured   by   the   conical   sur face   of  
e

ach   bolt.
After changing a wheel
To correctly store the punctured wheel in   the   boot   (not in the location of the
space-saver wheel ),
  first   remove   the  
c

entral   cover.
When
  using   the   "space-saver"   type  
s

pare   wheel,   do   not   exceed   50   mph  
(

80 km/h).
Have
  the   tightening   of   the   bolts   and   the  
p

ressure   of   the   spare   wheel   checked  
b

y   a   CITROËN   dealer   or   a   qualified  
w

orkshop   without   delay.
Have
  the   punctured   wheel   repaired  
a

nd   refitted   to   the   vehicle   as   soon   as  
p

ossible.
7
Practical information