2015 Citroen C4 PICASSO Elec parking brake

130
With the vehicle stationary, the parking brake is automatically applied when the engine
is switched off
  by   pressing   the   START/STOP  
b

utton. Application
  of   of   the   parking   brake  
i

s   confirmed   by   illumination   of  
t

he   brake   indicator   lamp   and   the  
P

 indicator   lamp   in   the   control   lever,  
a

ccompanied   by   the   display   of   the  
m

essage   "Parking   brake   applied".
With
  the   engine   stalled   or   in   STOP  
m

ode   of   Stop   &   Start,   automatic  
a

pplication   does   not   take   place.
In
  automatic   mode,   you   can   manually  
a

pply  
o
r  
r
elease  
t
he  
p
arking  
b
rake  
u
sing  
t

he   control   lever.
Automatic operation
Automatic release
The complete release of the parking brake   is   confirmed   by   the   brake  
i

ndicator   lamp   and   the   P   indicator  
l

amp   in   the   control   lever   going   off,  
a

ccompanied   by   the   display   of   the  
m

essage   "Parking   brake   released".
When stationary with the engine running, do not depress   the   accelerator   pedal   unnecessarily, y

ou   risk   releasing   the   parking   brake.
Ensure first that the engine is running and the driver's   door   is   properly   closed.
The
  electric   parking   brake   releases
automatically and progressively when you
press
  the   accelerator:
F
 
M
anual   gearbox:   fully   depress   the   clutch  
p

edal,   engage   1
st or reverse gear; press t
he
 
accelerator
 
pedal   and   let   up   the   clutch  
ped

al.
F
 
E

lectronic
 
gearbox:   select   position   A, M or
R
 
then
 
press
 
the
  accelerator   pedal.
F
 
A

utomatic
 
gearbox:   select   position   D, M or
R
 
then
 
press
 
the
  accelerator.
Automatic application
With an electronic or automatic g earbox,   if   the   brake   does   not   release  
a

utomatically,   check   that   the   front   doors  
a

re   correctly   closed.
Driving

133
Operating faults
The various alert situations are described in the table below.
I n   the   event   of   a   fault   with   the   electric   parking   brake   it   is   recommended   that   you   contact   a   CITROËN   dealer   or   a   qualified   workshop   without   delay.
Situations Consequences
Display
  of   the   message   "Parking brake fault "
  and   the  
fo

llowing
 w
arning
 lam
ps: -
 
A
utomatic   release   is   not   available.
-
 
I
f   you   attempt   an   automatic   release,   a   help   message   is   displayed   on   acceleration  
w

hen   the   parking   brake   is   applied,   prompting   you   to   use   manual   release.
Display
  of   the   message   "Parking brake fault "
  and   of   the  
fo

llowing
 w
arning
 lam
ps: -
 
S
econdary   braking   does   not   have   full   power.
-
 
I
f   automatic   release   is   not   available,   a   help   message   is   displayed   on   acceleration  
w

hen   the   parking   brake   is   applied,   prompting   you   to   use   manual   release.
Display
  of   the   message   "Parking brake fault "
  and   of   the  
fo

llowing
 w
arning
 lam
ps: -
 
A
utomatic   application   is   not   available:   use   the   control   lever.
-
 
T
he   electric   parking   brake   can   only   be   used   manually.
-
 
I
f   automatic   release   is   also   not   available,   a   help   message   is   displayed   on  
a

cceleration   when   the   parking   brake   is   applied,   prompting   you   to   use   manual  
r

elease.
Display
  of   the   message   "Parking brake fault "
  and   of   the  
fo

llowing
 w
arning
 lam
ps: -
 
I
f   manual   application   and   release   do   not   work,   the   control   lever   is   faulty.
-
 
T
he   automatic   functions   must   be   used   in   all   circumstances:   they   are  
a

utomatically   reactivated   in   the   event   of   failure   of   the   control   lever.
-
 
Y
ou   can   no   longer   immobilise   the   vehicle   with   the   engine   running.
4
Driving

134
SituationsConsequences
Display
 
of
 
the
 
message
 
" Parking brake fault "
  and   of   the  
fo

llowing
 w

arning
 lam

ps: The
  Parking   Brake   is   faulty,   the   manual   and   automatic   functions   may   not   operate.
When stationary ,
  to   immobilise   your   vehicle:
-
 
P
ull   and   hold   the   control   lever   for   about   7   to   15   seconds,   until   the   warning   lamp  
c

omes   on   in   the   instrument   panel.
If
  this   procedure   does   not   work,   you   should   make   your   vehicle   safe:
-
 
P
ark   on   a   level   sur face.
-
 
E
ngage   a   gear   with   a   manual   or   electronic   gearbox,   or   place   the   gear   selector   in  
p

osition P   with   an   automatic   gearbox.
-
 
I
f   possible,   fit   a   wheel   chock.
Call
  on   a   CITROËN   dealer   or   a   qualified   workshop.
Display
 
of
 
the
 
message
 
" Parking brake fault "
  and   of   the  
fo

llowing
 w

arning
 lam

ps: -
 
T
he   parking   brake   does   not   have   its   full   per formance   to   securely   hold   the   vehicle  
i

n   all   situations.
You
  should   make   your   vehicle   safe:
-
 
P
ark   on   a   level   sur face.
-
 
E
ngage   a   gear   with   a   manual   or   electronic   gearbox,   or   place   the   gear   selector   in  
p

osition P   with   an   automatic   gearbox.
-
 
I
f   possible,   fit   a   wheel   chock.
Call
  on   a   CITROËN   dealer   or   a   qualified   workshop.
The
  flashing   of   the   P   warning   lamps   on   starting   the   vehicle   indicates   that   the   parking  
b

rake   is   not   correctly   applied.
As
  soon   as   possible,   stop   the   vehicle   and   try   to   completely   release   the   parking   brake,  
u

sing   the   control   lever,   with   your   foot   on   the   brake   pedal.
Display
 
of
 
the
 
message
 
" Battery fault "
  and   the   following  
w

arning
 lam

p: -
 
T
he   state   of   charge   of   the   battery   is   very   low   and   requires   immobilisation   of   the  
v

ehicle   in   a   safe   place:   engage   a   gear   with   a   manual   gearbox   or   fit   a   chock   to  
o

ne   of   the   wheels.
-
 
O
nce   the   battery   is   completely   discharged,   the   controls   do   not   operate:   to  
r

elease   the   parking   brake,   call   on   a   CITROËN   dealer   or   a   qualified   workshop.
Driving

135
Hill start assist
System which keeps your vehicle immobilised temporarily   (approximately   2   seconds)   when  
s

tarting   on   a   gradient,   the   time   it   takes   to  
m

ove   your   foot   from   the   brake   pedal   to   the  
a

ccelerator
 ped
al.
This
  system   only   operates   when:
-
 
t
he   vehicle   is   completely   stationary,   with  
y

our   foot   on   the   brake   pedal,
-
 
c
ertain   conditions   of   slope   are   met,
-
 
w
ith   the   driver’s   door   closed.
The
  hill   start   assist   system   cannot   be  
d

eactivated.
On an ascending slope, with the vehicle
stationar y, the vehicle is held for a
momentarily when you release the brake pedal:
- provided   you   are   in   first   gear   or   neutral   on  a
  manual   gearbox,
-
 
p
rovided   you   are   in   position   A or M on an
electronic
 ge

arbox,
 D
or M   on   an   automatic  
g

earbox.
Operation
On a descending slope, with the vehicle
stationary and reverse gear engaged, the
vehicle is held momentarily when you
release the brake pedal.
Operating fault
If a fault in the system occurs, these warning lamps   come   on,   accompanied   by   an   alert  
m

essage.   Contact   a   CITROËN   dealer   or  
a

  qualified   workshop   to   have   the   system  
c

hecked.
Do
 
not
 
exit
 
the
 
vehicle
 
while
 
it
 
is
 
being
 
h

eld
 
in
 
the
 
hill
 
start
 
assist
 
phase.
If
 
you
 
need
 
to
 
exit
 
the
 
vehicle
 
with
 
t

he
 
engine
 
running,
 
apply
 
the
 
parking
 
b

rake
 
manually
 
then
 
ensure
 
that
 
the
 
p

arking
 
brake
 
warning
 
lamp
 
(and
 
the
 
w

arning
 lam

p
 P

in the lever of the
electric
 
parking
 
brake)
 
are
 
on
 
fixed
 
(not
 
f

lashing).
4
driving

138
Displays in the instrument panel
N. neutral
R. R everse
M.

(
and gear engaged)
 M
anual
 m
ode.
AUTO or A.
 
A
utomated   mode. If the engine does not star t:
If N
  flashes   in   the   instrument   panel,  
a

ccompanied   by   an   audible   signal   and  
a

  message,   move   the   selector   lever   to  p
osition A then to position N
.
Moving off
F Select position N.
F  P ress   the   brake   pedal   down   fully.
F
 
S
tart   the   engine.
N
  appears   in   the   instrument   panel  
sc

reen. F
 S elect   automated   mode   (position   A
)   or  m
anual   mode   (position   M)   or   reverse  
(

position
 R).
F

 
R
elease   the   parking   brake   by   pulling   the  
c

ontrol   lever,   if   automatic   operation   has  
b

een
 d
eactivated.
F
 
P
rogressively   take   your   foot   off   the   brake  
ped

al.
F
 
I
f   the   parking   brake   is   released,   the   vehicle  
m

oves   off.
 I

f   the   parking   brake   is   applied   and   the  
a

utomatic   mode   is   activated,   accelerate  
p

rogressively.A or AUTO
 

and   1, 1 or R
  is   displayed  
i

n   the   instrument   panel.
If the Foot on brake
warning
  lamp   comes   on  
t

he   instrument   panel,  
a

ccompanied   by   an   audible   signal   and  
a

  message   "Foot   on   brake",   press   the  
b

rake   pedal   firmly. If
  the   brake   does   not   release  
a

utomatically,   check   that   the   front   doors  
a

re   correctly   closed.
Driving

140
To engage reverse gear R,   the   vehicle   must   be  i
mmobilised   with   your   foot   on   the   brake   pedal.
F

Sel
ect position R .
Reverse
Engagement of reverse gear is accompanied b
y   an   audible   signal.
At
  low   speed,   if   reverse   gear   is   requested,   the  
N

 indicator   flashes   and   the   gearbox   goes   into  
n

eutral   automatically.   To   engage   reverse,   put  
t

he selector lever in position N , then position R.Before
  switching   off   the   engine,   you   can:
-  
m
ove   to   position   N   to   engage   neutral,
or
-  
l
eave   the   gear   engaged;   in   this   case,   it   will  
n

ot   be   possible   to   move   the   vehicle.
Stopping the vehicle
In both cases, if automatic operation of the e
lectric   parking   brake   has   been   deactivated,  
y

ou   must   apply the parking brake
 
by   pulling  
t

he   control   lever.
When
  immobilising   the   vehicle,   with  
t

he   engine   running,   you   must   place   the  
s

elector lever in neutral N .
Before
  carrying   out   any   work   in   the  
e

ngine   compartment,   ensure   that   the  
s

elector lever is in neutral N   and   that  
t

he   parking   brake   is   applied.
Whatever
  the   circumstances,   you   must  
m

anually   apply   the   parking   brake   when  
p

arking,   if   automatic   operation   has  
b

een
 d
eactivated. With
  the   ignition   on,   the   flashing   of   A or
AUTO ,   accompanied   by   an   audible   signal   and  
a

  message,   indicates   a   malfunction   of   the  
g

earbox.
Operating fault
Have it checked by a CITROËN dealer or a q
ualified w orkshop.
In the event of a battery failure, use the
chock
 
to
 
immobilise
 
the
 
vehicle.
Driving

141
Automatic gearbox
This gearbox offers two driving modes.
-  a utomated  mode   for   automatic  
m

anagement   of   the   gears   by   the   gearbox,  
w

ithout   any   action   on   the   part   of   the   driver,
-
 
m
anual
 
mode   for   sequential   gear   changing  
b

y   the   driver   using   the   steering   mounted  
p

addles.
P.
 Pa

rk.
-
 
I
mmobilisation   of   the   vehicle,   parking   brake  
a

pplied   or   released.
-
 
S
tarting   the   engine.
R.
 R

everse.
-
 
R
eversing,   vehicle   stationary   and   engine   at  
i

dle.
N.
 N

eutral.
-
 
I
mmobilisation   of   the   vehicle,   parking   brake  
a

pplied.
-
 
S
tarting   the   engine.
D.
 A

utomatic
 ope
ration.
M.
 M

anual   operation   with   sequential   changing  
o

f   the   six   gears.Gear selector lever
To select position P,   move   the   gear  s
elector   to   the   highest   position  
(

towards  R),
  then   push   it   for wards   and  
t

hen   to   the   left.
Only
  engage   it   when   the   vehicle   is   at   a  
c

omplete   stop.   In   this   position,   the   front  
w

heels   are   locked.   Ensure   that   the   gear  
s

elector   is   correctly   positioned.
To
  move   the   gear   selector,   switch   on  
t

he   ignition   or   start   the   engine.
If
  the   battery   is   not   sufficiently   charged,  
i

t   is   not   possible   to   move   the   gear  
s

elector.
To
  come   out   of   position   P
,   move   the  
g

ear   selector   to   the   right   to   the   desired  
p

osition,   while   keeping   your   foot   on   the  
b

rake
 ped
al.
It
 
is
 
possible
 
to
 
change
 
from
 
one
 
mode
 
t

o
 
the
 
other
 
at
 
any
 
time.
With
 
the
 
automated
 
mode,
 
you
 
can
 
t

emporarily
 
take
 
control
 
of
 
the
 
gear
 
c

hanges
 
at
 
any
 
time.
4
Driving

143
F Check  that   the   symbol   displayed   in   the  i
nstrument   panel   agrees   with   the   position  
o

f   the   selector.
F
 
P
rogressively   release   the   brake   pedal.
F
 
I
f   the   parking   brake   is   release,   the   vehicle  
m

oves   off.
 I

f   the   parking   brake   is   applied   and  
a

utomatic
 ope
ration
 i
s
 a
ctivated,
 a
ccelerate
 a

way.
Never
  press   the   accelerator   and   brake  
p

edals   at   the   same   time.   Braking   and  
a

cceleration   should   be   done   only   with  
t

he   right   foot.   Pressing   both   pedals  
t

ogether   risks   damaging   the   gearbox.
If
  the   brake   does   not   release  
a

utomatically,   check   that   the   front   doors  
a

re   correctly   closed. Never
  leave   children   unsupervised   in  
t

he   vehicle   when   the   engine   is   running.
When
  carrying   out   a   maintenance  
o

peration   with   the   engine   running,  
a
pply  
t

he   parking   brake   and   select   position   P.
ne

ver select position P or R unless the
vehicle
  is   a   a   complete   stop   with   the  
br

ake
 a
pplied.
When
  you   want   to   engage   reverse,  
t

o   avoid   jolts,   do   not   accelerate  
i

mmediately   after   engaging   R.
Changing
 in

to
 p
osition
 R
is
accompanied
  by   an   audible   signal.never select position N   when   driving.  
I

f position N is   engaged   in   error   when  
m

oving,   allow   the   engine   to   idle,   then  
e

ngage   position   D   to   accelerate.
When
  the   engine   is   running   at   idle,  
b

rakes   releases,   if   position   R, D or M is
selected,
  the   vehicle   will   move   even   if  
t

he   accelerator   is   not   pressed.
4
Driving