2015 Citroen C4 audio

04
307
C4-2_en_Chap13b_SMEGplus_ed01-2015
C4-2_en_Chap13b_SMEGplus_ed01-2015
CD, MP3 CD / USB player
The audio equipment will only play audio files with".wma, .aac, .flac, .ogg  and   .mp3"   file   extensions   and   with   a   bit   rate   of   between   32Kbps  
and

  320   Kbps.
It
  also   supports   VBR   (Variable   Bit   Rate)   mode.
No
  other   type   of   file   (.mp4, ...)   can   be   played.
WMA
 

files   must   be   of   the   standard   wma   9   type.
The
  sampling   rates   supported   are   11,   22,   44   and   48   KHz.
It
  is   advisable   to   restrict   file   names   to   20   characters,   without   using   of  
special

  characters   (e.g.:   "   "   ?   ;   ù)   to   avoid   any   playing   and   displaying  
problems.
In order to be able to play a recorded C

d R or C d RW, when
recording
  it   is   preferable   to   select   the   ISO   9660   level   1,   2   or   Joliet  
standard.
If

  the   disc   is   recorded   in   another   format   it   may   not   be   played  
correctly

.
It
  is   recommended   that   the   same   recording   standard   is   always   used  
for

  an   individual   disc,   with   as   low   a   speed   as   possible   (4x   maximum)  
for

  optimum   sound   quality.
In
  the   particular   case   of   a   multi-session   CD,   the   Joliet   standard   is  
recommended. Information and advice The
  system   supports   USB   mass   storage   devices,   BlackBerry®
devices or
a
pple® players via USB ports. The   adaptor   cable   not  supplied.
Control
 
of
 
the
 
peripheral   device   is   with   the   audio   system   controls.
Other
 
peripherals,   not   recognised   on   connection,   must   be   connected  
to

 
the
 
auxiliary
 
socket   using   a   Jack   cable   (not   supplied).
Use
 
only
 
USB
 
memory   sticks   formatted   FAT
 
32   (28-bit   file   allocation  
table).
MUSIC
The system does not support two identical devices connected at the same  time   (two   memory   sticks,   two  Apple® players) but it is possible to
 
connect
 
one
 
memory
 
stick
 
and
 
one
 Apple® player at the same time.
It
 
is
 
recommended
 
that
 
genuine
 
Apple® USB cables are used to ensure
 
correct
 
operation.

04
309
C4-2_en_Chap13b_SMEGplus_ed01-2015
C4-2_en_Chap13b_SMEGplus_ed01-2015
Audio streaming
Streaming allows audio files on your telephone to be played via the vehicle's  speakers.
Connect
  the   telephone:   see   the   "Telephone" section, then
"Bluetooth".
Choose the " Audio" or "All"
  profile.
If
  play   does   not   start   automatically,   it   may   be   necessary   to   start   the  
audio

  playback   from   the   telephone.
Control
  is   from   the   peripheral   device   or   by   using   the   audio   system  
buttons.
Once

  connected   in   streaming   mode,   the   telephone   is   considered   to  
be

  a   media   source.
It
  is   recommended   that   you   activate   "Repeat" on the b luetooth
peripheral.
Connecting APPLE® players
Connect the apple® player to one of the USB ports
 
using
 
a
 
suitable   cable   (not   supplied).
Play
 
starts
 
automatically.
Control
 
is
 
via
 
the
 
audio   system.
The
 
classifications
 
available   are   those   of   the   portable   device  
connected

 
(artists
 
/
  albums   /   genres   /   playlists   /   audiobooks   /  
podcasts).
The

 
default
 
classification   used   is   by   artist.  
T
o   modify   the  
classification

 
used,
  return   to   the   first   level   of   the   menu   then   select  
the

 
desired
 
classification   (playlists   for   example)   and   confirm   to   go  
down

 
through
 
the
 
menu   to   the   desired   track.
Copies
 
of
 
photos
 
and   album   artwork   are   not   compatible   with   the  
audio

 
system.
 
These
  appear   only   with   a   USB   memory   stick.
MUSIC
The version of software in the audio system may not be compatible with  the   generation   of   your  Apple® player.

04
C4-2_en_Chap13b_SMEGplus_ed01-2015
C4-2_en_Chap13b_SMEGplus_ed01-2015
Using the auxiliary input (AUX)
(cable not supplied)
Connect the portable device (MP3 player…) to the auxiliary JACK socket  using   an   audio   cable.
First
  adjust   the   volume   of   your   portable   device   (to   a   high   level).  
Then
 
adjust

  the   volume   of   your   audio   system.
Display
  and   management   of   the   controls   are   via   the   portable   device.
Select
  change   the   source.
Select Media
  to   display   the   primary   page.
Select the AUXILIARY
  source.
MUSIC
310

04
3 11
C4-2_en_Chap13b_SMEGplus_ed01-2015
C4-2_en_Chap13b_SMEGplus_ed01-2015
Select "New folder" to create a folder structure
in  the   Jukebox   or   select   "Keep structure " to
retain
  the   structure   from   the   device.
Select
  the   magnifying   glass   to   enter   the   folder  
or

  album   and   select   audio   file   by   audio   file.
Managing the Jukebox
Select "Media list". Connect  the   device   (MP3   player...)   to   the   USB   port   or   auxiliary   JACK  
socket

  using   a   suitable   audio   cable.
Select copy "Copy Jukebox".
MUSIC
When no audio file is copied to the system with a capacity of 8GB, all   of   the   Jukebox   function   symbols   are   greyed   and   are   not   available.
Select "Sort by folder" or "Sort by album ".Select "Confirm" then "Copy".
While
  copying   the   system   returns   to   the   primary  
page;

  you   can   go   back   to   the   copy   view   at   any  
time

  by   selecting   this   button.

05
327
C4-2_en_Chap13b_SMEGplus_ed01-2015
C4-2_en_Chap13b_SMEGplus_ed01-2015
Red and yellow triangle: traffic information, for example:
Modified   signs
Risk
  of   explosion Narrow
  carriageway
Road closed
Slippery surface
Demonstration
a

ccident
Danger
d

elay
n

o entry Roadworks
Traffic
  jam
Main traffic symbols
Black   and   blue   triangle:   general   information,   for   example:
Weather reports Traffic
  reports
Wind Fog
Parking Snow
  /   iceReceiving TA messages
TRAFFIC
Select "Settings". Press on Navigation
  to   display   the   primary  
page

  then   go   to   the   secondary   page.
Select "Voice".
Activate
  /   Deactivate   "Traffic (TA)".
The
 
T
A
 
(Traffic  
Announcement)
  function   gives   priority   to  
T
A
 
alert  
messages.

 
T
o   operate,   this   function   needs   good   reception   of   a  
radio

  station   transmitting   this   type   of   message.   When   a   traffic   report  
is

  transmitted,   the   current   audio   source   (Radio,   CD,   USB,   ...)   is  
interrupted

  automatically   to   play   the  
T
A
 
message.   Normal   playback  
of

  the   audio   source   resumes   at   the   end   of   the   transmission   of   the  
message.

06
C4-2_en_Chap13b_SMEGplus_ed01-2015
C4-2_en_Chap13b_SMEGplus_ed01-2015
332
CONFIGURATION
Level 1Level 2 Level 3
"Configuration"
Primary pageAudio settings
Audio settingsAudio settings

333
C4-2_en_Chap13b_SMEGplus_ed01-2015
C4-2_en_Chap13b_SMEGplus_ed01-2015
Level 1Level 2 Level 3 Comments
Configuration
Audio settings Ambience
Choose the sound ambience.
BalanceSet the position of the sound in the vehicle using the Arkamys® system.
Sound effectsSet the volume or activate the link to vehicle speed.
RingtonesSet the telephone ringtone and volume.
VoiceSet the volume and voice for speaking street names.
ConfirmSave the settings.
Configuration
Turn off screenTurn off the display (black screen). A  press   on   the   black  screen
  restores   the   display.

06
C4-2_en_Chap13b_SMEGplus_ed01-2015
C4-2_en_Chap13b_SMEGplus_ed01-2015
338
CONFIGURATION
- "Ambience" (choice of 6 musical ambiences)
- "Bass "
-
"Treble"
-
"Loudness"   (Activate/Deactivate)
-
"Balance"   ("Driver", "All passengers", "Front only ")
-
"Audio setting on touch screen "
-
"Volume linked to vehicle speed: "
  (Activate/Deactivate)
The
 
audio
 
settings
 
( Ambience, Bass , Treble and Loudness)
 
are
 
dif

ferent
 
and
 
independent
 
for
 
each
 
sound
 
source.
The
 
settings
 
for
 
distribution
 
and
 
balance
 
are
 
common
 
to
 
all
 
sources.
The
 
distribution
 
(or
 
spatialisation
 
using
 
the
 
Arkamys© system) of
 
sound
 
is
 
an
 
audio
 
process
 
that
 
allows
 
the
 
audio
 
quality   to   be  
adapted

 
to
 
the
 
number
 
of
 
listeners
 
in
 
the
 
vehicle.
Available
 
only
 
with
 
the
 
6-speaker
 
configuration. On-board
  audio:  
Arkamys© Sound Staging.
With
 
Sound
 
Staging,
 
the
 
driver   and   passengers   are   immersed   in   an  
"audio

 
scene"
 
recreating
 
the   natural   atmosphere   of   an   auditorium:  
truly

 
a
 
part
 
of
 
the
 
scene
 
and   its   surroundings.
This
 
new
 
sensation
 
is
 
made   possible   by   software   in   the   audio  
system

 
which
 
processes
 
the   digital   signals   from   the   media   players  
(radio,

 
CD,
 
MP3…)
 
without   changing   the   audio   settings.  
This
 
processing

 
takes
 
account
 
of   the   characteristics   of   the   passenger  
compartment

 
to
 
produce
 
optimum   results.
The
 
Arkamys© software installed in your audio system processes the
 
digital
 
signal   from   the   media   players   (radio,   CD,   MP3,   ...)   and  
recreates

 
a
 
natural   musical   scene,   with   harmonious   placement   of  
instruments

 
and   voices   in   the   space   in   front   of   passengers,   level   with  
the

 
windscreen.
Audio settings
Select "Audio settings ".
Press on Configuration
 
to   display   the   primary  
page.
Select "

Ambience" or "Balance" or "Sound
effects " or "Ringtones" or "Voice".