2015 Citroen C4 CACTUS display

64
C4-cactus_en_Chap03_confort_ed02-2014
In cold weather with the engine cold, the   air   flow   is   increased   gradually   until  
t

he   system   has   warmed   up,   in   order  
t

o   limit   the   delivery   of   cold   air   into   the  
p

assenger
 c
ompartment.
On
  entering   the   vehicle,   if   the   interior  
t

emperature   is   much   colder   or   warmer  
t

han   the   comfort   value   setting,   there  
i

s no need to alter the value displayed
in
  order   to   reach   more   quickly   the  
r

equired   level   of   comfort.   The   system  
c

ompensates   automatically   and  
c

orrects   the   temperature   difference   as  
q

uickly   as   possible.
This
 
setting
 
is
 
associated
 
with
 
AUTO
 
mode
 
o

nly.
 
However,
 
on
 
deactivation
 
of
 
AUTO
 
mode,
 
t

he
 
last
 
setting
 
used
 
remains
 
on.
Changing
 
the
 
setting
 
does
 
not
 
reactivate
 
AUTO
 
m

ode
 
if
 
deactivated.
To
 
change
 
the
 
current
 
setting
 
press
 
the
 
button
 f
or
 
the
 
desired
 
mode:
" Soft ":
 
provides
 
soft
 
and
 
quiet
 
o

peration
 
by
 
limiting
 
air
 
flow.
" Normal ":
 
offers
 
the
 
best
 
c

ompromise
 
between
 
a
 
comfortable
 
t

emperature
 
and
 
quiet
 
operation
 
(

default
 
setting).
" Fast ":
 
provides
 
strong
 
and
 
effective
 
a

ir
 
flow.
Automatic programme mode
setting
F Go   to   the   secondary   page  b
y   pressing   this   button   to  
m

odulate   the   automatic   comfort  
p

rogramme,   choosing   one   of   the  
m

odes   offered.
Comfort

65
C4-cactus_en_Chap03_confort_ed02-2014
You can modulate the distribution of air in the passenger   compartment   using   these   three   buttons.
Air flow adjustment
Avoid driving for too long with the ventilation   off   (risk   of   misting   and  
d

eterioration   of   air   quality).
Air distribution adjustment
F Press one of these buttons to increase   or   decrease   the   air   flow.
The
 
symbol   for   air   flow   (a   fan)   fills   progressively  
a

ccording
  to   the   air   flow   setting   made.
By
 
reducing   the   air   flow   to   minimum,   you   are  
s

topping
 v
entilation.
" OFF "
 
is
 
displayed   alongside   the   fan. Windscreen.
Centre
  and   side   vents.
Footwells.
Each
  press   on   a   button   activates   or   deactivates  
t

he   function.
Resuming manual control
You can manually adjust the air flow and distribution.
F

P
ress the "AUTO" button to
activate
  the   automatic   comfort  
p

rogramme
 ag
ain.
As
  soon   as   you   modify   a   setting,   the   automatic  
c

omfort   programme   is   deactivated.
For
  a   uniform   distribution   in   the  
p

assenger   compartment,   all   three  
b

uttons   can   be   pressed   simultaneously.
3
Comfort

72
C4-cactus_en_Chap04_amenagements_ed02-2014
Auxiliary socket
USB por t(s)*
For best reception, it is recommended t
hat the "CITRoËn M ULTICITY
CONNECT"
  connection   key   be   plugged  
i

nto   the   USB   port   located   in   the   glove  
b

ox   (depending   on   version).
When a US
b

port is used, the portable
device   charges   automatically.
For   more   information   on   the   use   of  
t

his   equipment,   refer   to   the   "Audio   and  
t

elematics"
 se
ction.
For
 
more
 
information
 
on
 
using
 
this
 
e

quipment,
 
refer
 
to
 
the
 
"Audio
 
and
 
t

elematics"
 se

ction. It
  permits   the   connection   of   a   portable   device  t
o   listen   to   your   music   files   using   the   vehicle's  
s

peakers.
The
  management   of   the   files   is   done   using   your  
p

ortable
 d
evice.
It allows the connection of a portable device or
a
 
USB
 
memory
 
stick.
It reads the audio files which are sent to your
audio
 
system
 
and
 
played
 
via
 
the
 
vehicle's
 
s

peakers.
You
 
can
 
manage
 
these
 
files
 
using
 
the
 
steering
 
m

ounted
 
or
 
audio
 
system
 
controls. A
  message   is   displayed   if   the   power  
d

rawn   by   the   portable   device   exceeds  
t

he   current   supplied   by   the   vehicle.
*
 
Depending
 
on
 
version.
Fittings

84
C4-cactus_en_Chap05_conduite_ed02-2014
Operation
Gear shift indicator
System which reduces fuel consumption by advising the driver to change up, on vehicles fitted with a manual gearbox.T he   system   adapts   its   gear   change  
r

ecommendation   according   to   the  
d

riving   conditions   (slope,   load,   ...)   and  
t

he   demands   of   the   driver   (power,  
a

cceleration,   braking,   ...).
The
  system   never   suggests:
-
 
e
ngaging   first   gear,
-
 enga

ging
 r
everse
 g
ear,
-
 
e
ngaging   a   lower   gear.
Example:
-
 
Y
ou   are   in   third   gear.
Depending
  on   the   driving   situation   and   your  
v

ehicle's   equipment,   the   system   may   advise  
y

ou   to   skip   one   (or   more)   gear(s).   You   can  
f

ollow   this   instruction   without   engaging   the  
i

ntermediate
 g
ears.
-
 
Y
ou   press   the   accelerator   pedal.
-
 
T
he   system   may   suggest   that   you   engage  
a

  higher   gear.
The
  information   appears   in   the   instrument  
p

anel   in   the   form   of   an   arrow,   accompanied   by  
t

he   recommended   gear.
On
  certain   Diesel   versions   with   manual  
g

earbox,   the   system   may   suggest  
c

hanging   into   neutral   (N is displayed in
the
  instrument   panel)   so   that   the   engine  
c

an   go   into   standby   (STOP   mode  
w

ith   Stop   &   Start),   in   certain   driving  
c

onditions.
The
  gear   engagement   recommendations   must  
n

ot   be   considered   compulsory.   In   fact,   the  
c

onfiguration   of   the   road,   the   amount   of   traffic  
a

nd   safety   remain   determining   factors   when  
c

hoosing   the   best   gear.   Therefore,   the   driver  
r

emains   responsible   for   deciding   whether   or   not  
t

o   follow   the   advice   given   by   the   system.
This
  system   cannot   be   deactivated.
Driving

85
C4-cactus_en_Chap05_conduite_ed02-2014
ETG electronic gearbox
N Neutral:  with   your   foot   on   the   brake,   press  t
his   control   to   put   the   gearbox   into   neutral  
a

nd   for   starting   the   engine.
D
 
D
rive:   press   this   control   to   engage   for ward  
d

rive   with   automatic   operation   of   the   gears.
R
 
R
everse:   with   your   foot   on   the   brake,   press  
t

his   control   to   engage   reverse.
Control panel
F Press  the   back   of   the   paddle   to  t
he right  of   the   steering   wheel   to  
ch

ange up .
Steering mounted controls
The steering mounted paddles do not a
llow neutral to be selected, or reverse
gear
  to   be   engaged   or   disengaged.
Five
 
or
 
six-speed
 
electronically
 
controlled
 
gearbox
 
which
 
offers   the   comfort   of   automatic   control   of   the   gears,   without   any   action   by   the   driver.
You
 
can
 
temporarily
 
take
 
control
 
of
 
gear
 
changes
 
at
 
any
 
time,   using   the   steering   mounted   control   paddles.
F  
P
ress   the   back   of   the   paddle   to  
t

he left
 
of   the   steering   wheel   to  
ch

ange down
.
Display in the instrument panel
F Place your foot on the brake
when   this   warning   lamp   flashes.
N
n
e

utral
D and 1 2 3 4 5 / 6    
D
rive   (for ward   drive)   and  
t

he
 g
ear
 enga
ged.
R

Reverse
5
Driving

90
C4-cactus_en_Chap05_conduite_ed02-2014
Stop & Start
Operation
Going into engine STOP mode
The "ECO"  warning   lamp   comes   on i
n   the   instrument   panel   and   the   engine g

oes   into   standby   automatically:
-

w

ith a manual gearbox , when stationary,
in neutral, and you release the clutch
pedal.
-

w

ith an electronic gearbox , when
stationary
  or   at   speeds   below   5   mph  
(

8 km/h)   (depending   on   version),   in   neutral  
(

control   on   N)
  or   when   you   press   the   brake  
ped

al. Never
  refuel   with   the   engine   in   STOP  
m

ode;   you   must   switch   off   the   ignition  
w

ith   the   button.
For
  your   comfort,   during   parking  
m

anoeuvres,   STOP   mode   is   not  
a

vailable for a few seconds after
coming
  out   of   reverse   gear.
STOP
  mode   does   not   affect   the   the  
v

ehicle's   systems,   such   as   for   example,  
b

raking,   power   steering...
Special cases: STOP mode not
available
STOP mode is not invoked principally when:
-  t he   vehicle   is   on   a   steep   slope   (rising   or  
f

alling),
-
 
t
he   driver's   door   is   open,
-
 
t
he   driver's   seat   belt   is   not   fastened,
-
 
t
he   vehicle   has   not   exceeded   6   mph  
(

10 km/h)   since   the   last   engine   start   by   the  
d

river,
-
 
t
he   engine   is   needed   to   maintain   a  
c

omfortable   temperature   in   the   passenger  
c

ompartment,
-
 
d
emisting   is   active,
-
 
s
ome   special   conditions   (battery   charge,  
e

ngine   temperature,   braking   assistance,  
a

mbient   temperature...)   where   the   engine   is  
n

eeded   to   assure   control   of   a   system.
In this case, the "ECO"
 

warning  
l

amp   flashes   for   a   few   seconds   then  
g

oes off.
This operation is perfectly normal.
The
 
Stop
 
&
 
Start system
 
puts
 
the
 
engine
 
temporarily
 
into
 
standby
 
-
 
STOP
 
mode
 
-
 
during
 
stops
 
in
 
the
 
traffic   (red   lights,   traffic   jams,  
or
 
other...).
 
The engine
 
restarts
 
automatically
 
-
 
START
 
mode
 
-
 
as
 
soon
 
as
 
you
 
want
 
to
 
move
 
off.
 
The
 
restart   takes   place   instantly,   quickly  
and
 
silently.
Per fect
 
for
 
urban
 
use,
 
the
 
Stop
 
&
 
Start
 
system
 
reduces
 
fuel
 
consumption
 
and
 
exhaust
 
emissions
 
as
 
well
  as   the   noise   level   when  
stationary.
Stop & Start time counter
A cumulative time counter for periods i n   STOP   mode   during   a   journey.
It
 
is
 
displayed   in   the   trip   computer   (accessible  
v

ia the " Driving assistance "
  menu   of   the  
t

ouch
 
screen   tablet).
It resets to zero every time the ignition is switched on.
driving

92
C4-cactus_en_Chap05_conduite_ed02-2014
A fault with the system is signalled in the " Driving assistance "
  menu  
(

primary   page)   of   the   touch   screen  
t

ablet.
Operating fault
In the event of a fault with the system, the   symbol   in   the button   changes   to   alert m

ode   and   the   indicator   lamp   flashes   for   a
 f

ew   moments   then   stays   on   continuously.
If you press this button to reactivate the
system,  the   indicator   lamp   flashes   again   for   a  
f

ew   moments   and   then   stays   on   continuously.
The
 
Stop
 
&
 
Start
 
system
 
can
 
be
 
deactivated
 
in
 
t

he
 
touch
 
screen
 
tablet.
Deactivation
If the system has been deactivated in STOP m ode,   the   engine   restarts   immediately.
When
  driving   on   a   flooded   road,   it   is  
r

ecommended   that   the   Stop   &   Start  
f

unction be deactivated and that you
drive
  very   slowly. The
  system   can   be   reactivated   in   the   touch  
s

creen
 t
ablet.
Reactivation
The system is reactivated automatically e
very   time   the   engine   is   started   by  
t

he driver.
F

P

ress on " Stop & Star t ".
F

Sel

ect the " Driving assistance "
menu.
The
 
indicator
 
lamp
 
in
 
this
 
button
 
comes
 
on
 
c

ontinuously. Pressing
  this  
b
utton   again   reactivates  
t

he   Stop   &   Start   system.   The  
i

ndicator   lamp   in   the   button   goes   off.
Have   it   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
In
  the   event   of   a   fault   in   STOP   mode,   the   vehicle
 m

ay   stall.
All
  of   the   instrument   panel   warning   lamps   come   on.
Depending
  on   version,   an   alert  
m

essage   may   also   be   displayed,   asking  
y

ou   to   change   to   neutral   (control   on   N)
 
a

nd   put   your   foot   on   the   brake   pedal.
You
  must   switch   off   the   ignition,   then  
s

tart   the   engine   again.
driving

93
C4-cactus_en_Chap05_conduite_ed02-2014
Steering mounted controls
6. Speed  limiter   on   /   pause   indication.
7. S peed   value   setting.
8.
 S

peed   limiter   mode   selection   indication.
Speed limiter
System which prevents the vehicle from exceeding the speed programmed by the driver.
T he   speed   limiter   cannot,   in   any
 c

ircumstances,   replace   the   need   to
 o

bserve   speed   limits,   nor   can   it   replace   the
 n

eed   for   vigilance   on   the   part   of   the   driver.1.
 S

peed   limiter   mode   selection   wheel.
2.
 V

alue   decrease   button.
3.
 V

alue   increase   button.
4.
 S

peed   limiter   on   /   pause   button.
5.
 L

ist   of   memorised   speeds   display   button.
Display in the instrument panelThe programmed speed remains in the system memory   when   the   ignition   is   switched   off.
5
Driving