Page 4 of 324
.
.
Child seats 92
dea
ctivating the passenger’s front airbag
9
5
IS
oF
IX child seats
1
01
Electric child lock
1
05
Child safety
Instrument panels 1 0
Indicator and warning lamps
1
2
a
djustment buttons
2
8
Trip computer
3
0
MonitoringOver view
Monochrome screen A 3
4
Monochrome screen C
3
7
Touch screen tablet
4
0
Multifunction screens
Ventilation 45
Heating
4
7
Manual air conditioning
4
7
Front demist - defrost
4
9
di
gital air conditioning
5
0
Rear screen demist - defrost
52
Scented air freshener
5
3
Front seats
5
4
Rear seats
5
6
Mirrors
5
7
Steering wheel adjustment
5
8
a
udio pre-equipment
5
9
ac
cessories
61
Comfort
Remote control key 6 3
Alarm
6
7
Window controls
6
9
D o o r s
71
Boo
t
7
4
access
Lighting controls 75
LED daytime running lamps
7
9
Headlamp adjustment
7
9
Wiper controls
8
0
Courtesy lamps
8
3
Interior mood lighting
8
4
Boot lamp
8
4
Visibility
Interior fittings 8 5
Boot fittings
9
0
Fittings
Eco-driving
Contents
Page 12 of 324

10
Panel grouping together the vehicle operation indication dials and warning lamps.
Instrument panels - manual gearbox
5. Display management button. S
ervicing information.
a
d
just the time and choose units.
R
eset the service indicator.
6.
I
nstrument panel lighting button.
a
d
justs the brightness of the lighting of the
instruments and controls.
1. R
ev counter.
I
ndicates the speed of rotation of the
engine (x 1 000 rpm).
2.
S
peedometer .
I
ndicates the current speed of the moving
vehicle (mph or km/h).
3.
F
uel gauge.
I
ndicates the quantity of fuel remaining in
the tank.
4.
S
creen. A. A
mbient temperature.
(
°Celsius or °Fahrenheit)
B.
G
ear efficiency indicator.
C.
Ti
me.
D.
E
ngine oil level indicator.
A
ppears a few seconds after switching on
the ignition, then disappears.
E.
T
rip computer.
F.
S
ervice indicator or Range related
to the AdBlue additive and the SCR
system (miles or km), then,
t
otal mileage.
T
hese functions are displayed successively
when switching on the ignition.
Screen
For more information, refer to the
section on the button or function and its
associated display.
Dials
Monitoring
Page 13 of 324

11
Instrument panels - electronic or automatic gearboxes
Panel grouping together the vehicle operation indication dials and warning lamps. Depending on the version, the instrument panel may have permanent
back-lighting.
1.
R
ev counter.
I
ndicates the speed of rotation of the
engine (x 1 000 rpm).
2.
S
peedometer .
I
ndicates the current speed of the moving
vehicle (mph or km/h).
3.
F
uel gauge.
I
ndicates the quantity of fuel remaining in
the tank.
4.
S
creen. 5.
D
isplay management button.
A
lternates display between range and trip
mileage recorder.
S
ervicing information.
R
esets the selected function to zero (trip
distance recorder or service indicator).
6.
I
nstrument panel lighting button.
a
d
justs the brightness of the lighting of the
instruments and controls.
ScreenDials
For more information, refer to the
section on the button or function and its
associated display. A.
S
peed limiter
(
mph or km/h) or
C
ruise control.
B.
G
ear
efficiency indicator.
C.
E
lectronic
or automatic gearbox
information.
D.
R
ange
(
miles or km) or
T
rip mileage recorder.
E.
S
ervice indicator
(
miles or km), then
tot
al mileage recorder.
T hese two functions are displayed
successively when switching on the ignition.
F.
E
ngine oil level indicator.
A
ppears a few seconds after switching on
the ignition, then disappears.
1
Monitoring
Page 14 of 324

12
Visual indicators informing the driver that a system is in operation (operation or deactivation indicator lamps) or of the occurrence of a fault
(warning lamp).
When the ignition is switched on
Certain warning lamps come on for a few
seconds when the vehicle's ignition is
switched
on.
When the engine is started, these same
warning lamps should go off.
If they remain on, before moving off, refer to the
information on the warning lamp concerned.
Operation indicator lamps
If one of the following indicator lamps comes on, this confirms that the corresponding system has
come into operation.
Associated warnings
The illumination of certain warning lamps may
be accompanied by an audible signal and a
message in the multifunction screen.
The warning lamps may come on continuously
(fixed) or flash.
Warning/indicator lamp is onCause Action / Observations
Left-hand direction
indicatorflashing with buzzer. The lighting stalk is pushed down.
Right-hand
direction indicatorflashing with buzzer.The lighting stalk is pushed up.
Sidelamps fixed. The lighting stalk is in the
"Sidelamps" position.
Hazard warning
lamps
flashing with audible
signal. The hazard warning lamps switch,
located on the dashboard, has been
operated. The left-hand and right-hand direction indicators and
their associated indicator lamps flash simultaneously.Certain warning lamps may come on
in one of two different modes. Only by
relating the type of illumination to the
operating status of the vehicle can it
be ascertained whether the situation is
normal or whether a fault has occurred.
Indicator and warning lamps
Monitoring
Page 15 of 324

13
Front foglampsfixed. The front foglamps are switched on
using the ring on the lighting control
stalk. Turn the ring on the lighting control stalk rear ward
twice to switch off the front foglamps.
Rear foglamps fixed. The rear foglamps are on. Turn the ring on the stalk rear ward to switch off the
rear foglamps.
Diesel engine
pre-heating fixed.
The key is at position 2 (ignition on) in
the ignition switch. Wait until the warning lamp goes off before starting.
The period of illumination of the warning lamp is
determined by the ambient conditions (up to about
thirty seconds in very low temperatures).
If the engine does not start, switch the ignition off and
then on, wait until the warning lamp goes off again,
then start the engine.
Parking brake fixed. The parking brake is applied or not
properly released. Release the parking brake to switch off the warning
lamp, keeping your foot on the brake pedal.
ob
serve the safety recommendations.
For more information on the parking brake, refer to the
corresponding section.
Dipped beam
headlamps
fixed.
The lighting stalk is in the "
di
pped
beam headlamps" position.
Main beam
headlamps fixed.
The lighting stalk is pulled towards
you. Pull the stalk to return to dipped beam headlamps.
Warning/indicator lamp
is onCause Action / Observations
1
Monitoring
Page 16 of 324
14
Stop & Star tfixed. When the vehicle stops (red lights,
traffic jams,
...) the Stop & Start system
has put the engine into ST
oP m
ode.The warning lamp goes off and the engine restarts
automatically in START mode, as soon as you want to
move off.
flashes for a few
seconds, then
goes off. ST
oP m
ode is temporarily
unavailable.
or
ST
aR
T mode is invoked
automatically. For more information on special cases with STOP
mode and ST
aR
T mode, refer to the "Stop & Start"
section.
Engine coolant
temperature
fixed blue.
on s
tarting the engine, it indicates
that the engine is cold. After a few minutes driving, it swiches off to indicate
that the engine temperature is normal.
In order to protect your engine, avoid driving too hard
until the warning lamp has switched off.
Warning/indicator lamp
is onCause Action / Observations
Monitoring
Page 31 of 324

29
When driving at night, this function allows
certain displays in the instrument panel to be
switched off so as to reduce fatigue for the
driver.
The essential driving information, such as the
speed of the vehicle, warning lamps, cruise
control or speed limiter information, remain
displayed in the instrument panel.Activation
F With the lighting on, press the left hand button of the instrument panel several
times to progressively reduce the
dashboard lighting level.
F
P
ress the button again to reduce the
lighting to the minimum level and switch off
the interior mood lighting.
F
P
ress the button again to activate the black
panel.
Black panel
(comfort night driving
display)
Activation
When the lighting is on:
F p ress the button to change the brightness
of the instruments and controls,
F
w
hen the level of brightness required is
reached, release the button.
Deactivation
When the lighting is off, or in day mode on
vehicles fitted with daytime running lamps,
pressing the button does not have any effect.
Lighting dimmer
System for manual adjustment of the
brightness of the instruments and controls to
suit the ambient light level.
1
Monitoring
Page 40 of 324

38
"Trip computer" menu
F Press the "MENU" button to gain access
to the general menu .
F
P
ress the arrows, then the "OK" button to
select the " Trip computer " menu.
Enter distance to destination
This allows you to enter an approximate
distance until your final destination.
Alert log
This summarises the active warning messages,
displaying them in succession in the
multifunction screen.
Status of functions
This summarises the status (active or inactive)
of the vehicle's functions.
"Personalisation-
Configuration" menu
Define the vehicle parameters
once this menu has been selected, you can
activate or deactivate the following equipment:
-
w
iper linked to reverse gear (refer to the
"Visibility" section),
-
g
uide-me-home lighting and duration
(refer to the " Visibility" section),
-
d
aytime running lamps (refer to the
"Visibility" section),
-
p
arking sensors (refer to the "
dr
iving"
section).
Using this menu, you can also reinitialise the
tyre under-inflation detection system (refer to
the "Safety") section.
F In the " Trip computer " menu, select one
of the following applications:
Multifunction screens