59
C3-additif_en_Chap13b_SMEGplus_ed01-2015
The services available depend
on the network, the SIM card and
the compatibility of the Bluetooth
®
telephone used. Check the telephone
manual and with your network provider
for details of the services available
to
you.
The ability of the system to connect
with only one profile depends on the
telephone. The three profiles may all
connect by default.
Visit www.citroen.co.uk for more information
(compatibility, additional help, ...).
The recognised telephone
appears in the list.
Depending on your telephone, you may be
asked to accept automatic connection every
time the ignition is switched on. On return to the vehicle, if the last telephone
connected is present again, it is reconnected
automatically and within around 30 seconds
after switching on the ignition the pairing is
done without any action on your part, with
(Bluetooth
® activated).
To modify the automatic connection mode,
select the telephone in the list then select the
desired profile. Depending on the type of telephone,
the system will ask you to accept or not
the transfer of your contacts.
If not, select " Update".
Connecting a Bluetooth®
peripheral device
Automatic reconnection
On switching on the ignition, the telephone
connected when the ignition was last switched
off is automatically reconnected, if this
connection mode had been activated during the
pairing procedure.
The connection is confirmed by the display of a
message and the name of the telephone.
Manual connection
Press on Telephone to display the
primary page.
Press on the secondary page.
Select " Bluetooth " to display the list
of paired peripherals.
Select the peripheral to connect. Press on " Search for devices ".
The connection is confirmed by the display of a
message and the name of the telephone.
.
Audio and Telematics
8
Safety107
Reinitialisation of the system must be done with the ignition on and the vehicle stationary: - in the vehicle configuration menu for vehicle fitted with a display screen, - using the button on the dashboard, for vehicles without display screen.
Monochrome screen A
Press the MENU button for access to the main menu. Press the " " or " " button to select the menu Veh conf ig , then confirm by pressing the button OK .
Press the " " or " " button to select the " Reinit inflat ", menu, then confirm by pressing the OK b u t t o n . A message is displayed to confirm the instruction. Confirm by pressing the OK b u t t o n .
Monochrome screen C
Press the MENU button for access to the main menu. Press the " " or " " button to select the " Personalisation-configuration " menu, then confirm by pressing
the OK button. Press the " " or " " button to select the " Define vehicle parameters " menu, then confirm by pressing the OK button. Press the " " or " " button to select the " Tyre pressures " menu, then the " Reinitialisation " menu, then confirming by pressing the OK b u t t o n . A message confirms the reinitialisation.
Touch screen tablet
Press the MENU button. Select the " Driving " menu. In the secondary page, select " Under-inflation initialisation " . A message is displayed to confirm the
reinitialisation instruction. Select " Ye s Select " Ye s Select " " or " No ", then confirm. A message confirms the reinitialisation.
The new pressure settings registered are considered to be reference values by the s y s t e m .
