2015 Citroen C ZERO service indicator

9
C-zero_en_Chap01_controle-de-marche_ed01-2014
Instrument panelPanel bringing together the various gauges and indicators for the operation of the vehicle.
1.
St
ate of charge indicator for the main
battery.
Dr

ive selector position indicator.
2.
En

ergy consumption / generation
indicator.
3.
Sp

eedometer
4.
Sc

reen. A.
To

tal distance recorder.
B.
Tr

ip distance recorder (Trip A or B).
C.
In

strument panel lighting dimmer.
D.
Di

stance remaining to the next service.
E.
Ti

me remaining to the next ser vice.
F.
Und

er-inflation detection.
G.
Re

maining range.
5.
Sc

reen control button.
Di

splay the various functions in turn.
Re

set the function selected (trip recorder
or service indicator).
Ad

just the level of instrument lighting.
For more information, refer to the
corresponding section.
Gauges and indicatorsScreen
1
Monitoring

21
C-zero_en_Chap01_controle-de-marche_ed01-2014
Service indicator
When the ignition is switched on, press
button A several times in succession until the
service indicator is displayed in the desired
units. This point can be indicated in one of two ways:
-
th
e miles (km) remaining,
-
th
e time remaining to the next service.
Operation
1. The screen indicates that 620 miles
(
1000 k m) or 1 month remain before the
next service.
2.
Th

e screen indicates that the date for the
service has been exceeded.
Ev

ery time the ignition is switched on,
the service spanner is displayed for a
few seconds to remind you that a service
should be carried out as soon as possible.
3.
On

ce the service has been carried out, the
distance or the number of months to the
next service is displayed again.
System which informs the driver when the
next service is due in accordance with the
manufacturer's servicing schedule.
The point at which the next service is due
is calculated from the last service indicator
zero
r

eset.
System for manual adjustment of the
brightness of the instruments and controls in
relation to the exterior brightness.
With the lighting on or off, press button A to
select the function, then hold down to change
the intensity of the lighting of the instruments
and controls in "day" or "night" mode.
The intensity of the lighting increases each time
button A is pressed.
When the lighting reaches the maximum
setting, press again to change to the minimum
setting.
When the lighting reaches the required
intensity, release button A .
The setting is saved when you release button A
and retained when the ignition switch is turned
to OFF.
Lighting dimmer
1
Monitoring

22
C-zero_en_Chap01_controle-de-marche_ed01-2014
The display of "---", indicating that the
service date has arrived, comes on
automatically after a certain time and
distance travelled. The screen then
indicates the time remaining before the
next service is due.
Resetting the service indicator to zero
After each service, the service indicator should
be rest to zero.
The procedures is as follows:
F
Sw

itch off the ignition (switch in the LOCK
or ACC position).
F
Pr

ess the reset button A several times in
succession until the service indicator is
displayed.
F
Pr

ess and hold the reset button for a few
seconds until the spanner flashes .
F
Pr

ess the reset button while the spanner is
flashing to change the display from "---" to
"CLEAR" .
Th

e distance (or time) remaining before the
next service is due is displayed.
Monitoring