102
C-zero_en_Chap08_info-pratiques_ed01-2014
F Extend the jack until its head comes into contact with the jacking point A or B used. The
vehicle's contact sur face A or B must be engaged with the central part of the head of the jack.
F
Ra
ise the vehicle until there is sufficient space between the wheel and the ground.
F Sl
acken the bolts using the wheelbrace.
F Po
sition the foot of the jack on the ground
and ensure that it is directly below the
front
A
or rear B jacking point provided on
the underbody, whichever is closest to the
wheel to be changed.
Removing a wheel
Practical information
103
C-zero_en_Chap08_info-pratiques_ed01-2014
F Remove the bolts and store them in a clean
place.
F
Re
move the wheel. Ensure that the jack is stable. If the
ground is slippery or loose, the jack
might slip or drop - Risk of injury!
Take care to position the jack only at
one of the vehicle’s jacking points A
or B under the vehicle, ensuring that the
contact sur face of the vehicle’s jacking
point is centred on the head of the jack.
Other wise there is a risk of damage to
the vehicle and/or that the jack might
drop - Risk of injury!
8
Practical information
