114
C-zero_en_Chap08_info-pratiques_ed01-2014
Changing a fuse
The extraction tweezer is fitted to the back of
the fusebox cover in the dashboard (left hand
side).
For access:
F
Un
clip the cover and remove it completely
by pulling it towards you.
F
Re
move the tweezer.
Access to tools
Before changing a fuse, the cause of the failure
must be identified and rectified.
F
Ch
eck that the ignition switch is in the
" LOCK " position.
F
Id
entify the faulty fuse by checking the
condition of its filament.
Changing a fuse
Good Failed
F
Us
e the special tweezer to extract the fuse
from its location.
F
a
lw
ays replace the faulty fuse with a fuse
of the same rating.
F
Ch
eck that the number etched on the box,
the rating etched on the top and the tables
below all agree. CITR
oËn w
ill not accept responsibility
for the cost incurred in repairing your
vehicle or for rectifying the malfunctions
resulting from the installation of
accessories not supplied and not
recommended by CITROËN and
not installed in accordance with its
instructions, in particular when the
consumption of all of the additional
equipment connected exceeds
10
mill
iamperes.
Your vehicle's electrical system is
designed to operate with standard or
optional equipment.
Before installing other electrical
equipment or accessories in your
vehicle, contact a CITROËN dealer or a
qualified workshop.
Practical information
