100
C-zero_en_Chap08_info-pratiques_ed01-2014
2. Inflation
F Check that the compressor switch A is in
the "OFF " position.
F
Un
coil the compressor pipe B .F
Co
nnect this pipe to the valve of the
repaired wheel.
F
Co
nnect the compressor's electric plug to
the vehicle's 12
V s
ocket (ignition switch in
position "ON" or "ACC").
F
St
art the compressor by turning the switch A
to the " ON" position.
F
Us
ing the compressor, adjust the pressure
in accordance with the vehicle's tyre
pressure label (located in the driver's door
aperture).
A lo
ss of pressure indicates that the
puncture has not been fully plugged;
contact a CITROËN dealer or a qualified
workshop for assistance.
F
Re
move the compressor and stow the kit.
F
Dr
ive off straight away at reduced
speed (50
m
ph [80
k
m/h] max) limiting
the distance travelled to approximately
120
m
iles (200
k
m).As soon as possible, go to a CITROËN
dealer or a qualified workshop.
Tell the technician that you have used
the kit. After checking, the technician
will advise you whether the tyre can be
repaired or must be replaced. If after around 5 to 7 minutes the
pressure is not attained, this indicates
that the tyre is not repairable; contact
a CITROËN dealer or a qualified
workshop for assistance.
Practical information
