2015 Citroen BERLINGO MULTISPACE RHD seats

121
Berlingo_2_VP_en_Chap05_Securite_ed02-2014
cHILd SEAt I n t HE F r O nt*
" r earward facing"
When a "rearward facing" child seat is
installed on the front passenger seat,
the
  passenger's   front   airbag   must   be  
deactivated.

  Otherwise   the child risks
being seriously injured or killed if
the airbag is deployed.
Adjust
  the   vehicle's   seat   to:
-
 
the
  fully   back   position,   with   the  
backrest

  straightened   for   a   seat  
without

  height   adjuster,
-
 
the
  fully   back   and   highest   position,  
with

  the   backrest   straightened   for   a  
seat

  with   height   adjuster.
"Forward facing"
When a "forward facing" child seat
is installed on the front passenger
seat,  the   passenger's   front   airbag   must  
remain

  active.
Adjust
  the   vehicle's   seat   to:
-
 
the
  fully   back   position,   with   the  
backrest

  straightened   for   a   seat  
without

  height   adjuster,
-
 
the
  fully   back   position   and  
highest

  position,   with   the   backrest  
straightened for a seat with height
adjuster

. Ensure that the seat belt is
correctly
  tensioned.
For child seats with a support leg,
ensure that this is in steady contact
with
  the   floor.   If   not,   adjust   the  
passenger

  seat.
*

Refer to the legislation in your
country before installin

g your child in
this
  seating   position.
Passenger seat in the fully back and
highest position.
Child safety
SaFETY
5

122
Berlingo_2_VP_en_Chap05_Securite_ed02-2014
cHILd SEAt At tHE r EA r
" r earward facing"
When a "rearward facing" child seat is
installed on a rear passenger seat,
move
  the   vehicle's   front   seat   forwards  
and

  straighten   the   backrest   so   that   the  
"rearward facing" child seat does not
touch

  the   vehicle's   front   seat.
"Forward facing"
When a "forward facing" child seat is
installed on a rear passenger seat,
move  the   vehicle's   front   seat   forwards  
and

  straighten   the   backrest   so   that   the  
legs of the child in the "forward facing"
child seat do not touch the vehicle's
front

  seat.
Ensure that the seat belt is
correctly
  tensioned.
For child seats with a support leg,
ensure
  that   this   is   in   firm   contact   with  
the

  floor. When a child seat is installed on a
passenger seat in row 3, put the
backrests
  of   the   outer   and   centre   seats  
in row 2 in front of the seat occupied by
the child seat in the table position, or if
this

  is   not   sufficient,   rermove   the   seats  
in row 2 so that the child seat or the
the legs of the child do not touch the
seats

  in   row   2.
Seats in row 3
a child seat with a support leg
must

  never   be   installed   on   a  
passenger seat in row 3

.
Child safety

126
Berlingo_2_VP_en_Chap05_Securite_ed02-2014
cHILd SEAtS r E c OMME nd E d BY c I tr OË n
Group 0+: from birth to 13 kg
L1
"R
o MER Baby-Safe Plus"
Installed in the rearward facing position
Groups 2 and 3: from 15 to 36 kg L4
"KLIPPAN
  Optima"
From
  22kg   (about   6   years),   the   booster   is   used   on   its   own.
L5
"RÖMER
k I d FIX"
Can
  be   fixed   on   the   vehicle's   ISOFIX   mountings.
The
  child   is   restrained   by   the   seat   belt.
CITROËN
 
offers
 
a
 
range
 
of
 
recommended
 
child   seats   which   are   secured using a three point seat belt:
Child safety

128
Berlingo_2_VP_en_Chap05_Securite_ed02-2014
InStALLIn G c HIL d SEAt S AttA c HE d u SI n G t HE SEAt BELt
* A child   seat   with   support   leg   must   never   be   installed   on   an   outer   passenger   seat   in   row   2.
**  
A 
child   seat   with   support   leg   must   never   be   installed   on   a   passenger   seat   in   row   3.
In accordance with European regulations, this table indicates the option\
s for installing child seats secured using a seat belt
and
  universally   approved   (a)   according   to   the   weight   of   the   child   and   the   seat   in   the   vehicle.
u

:
seat suitable for the installation of a child seat secured using the sea\
t belt and universally approved, "rearward facing"
and/or

  "forward   facing".Seat(s)
Weight of the child and indicative age
u
nder 13 kg
(groups 0 (b) and 0+)
Up to approx 1 year
From 9 to 18 kg

(group 1)
1 to 3 years approx From 15 to 25 kg

(group 2)
3
  to   6   years   approxFrom 22 to 36 kg
(group 3)
6
  to   10   years   approx
Row 1 (c)(d) Passenger
seatu
uuu
Row 2 (e)
(5

  and   7   seats)
o
uter seats
u
*
u
*
uu
Centre seatuuuu
Row 3 (f) (g)
(7

  seats)
a
ll seats
u
**
u
**
uu
Child safety

 129
Berlingo_2_VP_en_Chap05_Securite_ed02-2014
(a) Universal  child   seat:   child   seat  that can be installed in any vehicle
using
  the   seat   belt.
(b)
  Group   0:   from   birth   to   10   kg.
(c)

Refer to the legislation in force in
your country before installin

g your
child
  on   this   seat.
(d)

When a "rearward facing" child seat
is installed on a

front passenger
seat, the passenger's front airbag
must
  be   deactivated.   Otherwise,  
the child would risk being
seriously injured or killed if the
airbag is deployed

.
When a "forward facing" child seat
is installed on a

front passenger
seat, the passenger's front airbag
must
  remain   active. Remove
  and   stow   the   heads  restraint, before installin
g a child
seat
  with   backrest   on   a   passenger  
seat.
Refit

  the   head   restraint   once   the   child  
seat

  has   been   removed.
(e)
When a child seat is installed at
the rear
, forward facing or rearward
facing,
  move   the   vehicle's   seats  
in the row in front forwards and
straighten

  their   backrests   to   leave  
enough space for the child seat or
the

  child's   legs.
(f)
 
Put
  the   backrests   of   the   outer   and  
centre seats in row 2, located in
front of seat occupied by a child
seat, in the table position, or if this
is

  not   sufficient,   remove   the   seats  
in row 2, so that the child seat or
the child's legs do not touch the
seats

  in   row   2.
(g)

if the seats in row 3 are occupied,
do not leave a child seat installed
on the foldable row 2 seat, to allow
easy

  access   to   row   3.
Child safety
SaFETY
5

130
Berlingo_2_VP_en_Chap05_Securite_ed02-2014
"ISOFIX" MOuntInGS
Your vehicle has been approved in
accordance with the latest ISo FIX
regulation.
The
  mountings   comprise   three   rings   for  
each

  seat:
-

two front rings
A, located between
the
  vehicle   seat   backrest   and  
cushion,

  indicated   by   a   marking-
a rear ring B,   located   on   the   back  of
  the   vehicle's   seat   backrest,   for  
securing the upper strap referred to
as

  the  
T
op  
T
ether.
The Top Tether is used to secure the
upper strap of child seats that have
one.
 
This
  arrangement   limits   the  
forward tipping of the child seat in the
event

  of   a   frontal   impact.
This
  ISOFIX   mounting   system  
guarantees you fast, reliable and safe
fitting

  of   the   child   seat   in   your   vehicle.
The
  ISOFIX   child   seats   are   fitted   with  
two latches which are secured on the
two front rings

A.
Some
  also   have   an   upper   strap   which  
is attached to the rear ring

B.Follow strictly the instructions for
fitting
  child   seats   contained   in   the  
manufacturer's

  installation   guide.
To secure the child seat to the Top
Tether:
-
 
remove
  and   stow   the   head   restraint  
before installin

g the child seat in
this   seating   position   (refit   it   once  
the

  child   seat   has   been   removed),
-
pass the upper strap of the child
seat over the top of the seat
backrest,

  between   the   apertures   for  
the head restraint rods,
-
 secure   the   hook   on   the   upper   strap  to the rear ring,
-
 
tighten
  the   upper   strap.
The incorrect installation of a child
seat
  in   a   vehicle   compromises   the  
protection of the child in the event
of

  an   accident.
Refer
  to   the   table   for   information   on  
the installation of IS

o FIX child seats in
your
  vehicle.
Child safety

131
Berlingo_2_VP_en_Chap05_Securite_ed02-2014
This child seat can also be used on seats which are not fitted with ISOFIX mountings.
In  this   case,   it   must   be   attached   to   the   vehicle   seat   using   the   three   point   seat  
belt.
Follow the instructions for fitting the child seat given in the

seat
manufacturer's installation guide.
ISOFIX child seat recommended and approved for your vehicle
"ISOFIX rÖMEr duO plus"
(size category B1)
Group 1: from 9 to 18 kg
Installed
  only   in   the   "forward   facing"   position.
Secured to rings A, as well as ring B, called the Top Tether, using
  an   upper   strap.
Three
  seat   body   angles:   sitting,   reclining,   lying.
Child safety
SaFETY
5

132
Berlingo_2_VP_en_Chap05_Securite_ed02-2014
LOcAtIO n S FO r t HE I n S tALLAt IO n OF ISOFIX c HIL d SEAt S
*  In  the   7   seat   version,   all   three seats
in   row   2   must   be   present   when   child  
seats

  are   installed.
**
  
A 
child   seat   with   support   leg   must  
never be installed on an outer
passenger

  seat   in   row   2.
In accordance with European regulations, this table indicates the option\
s for the installation of IS
o FIX child seats on the
vehicle   seats   fitted   with   ISOFIX   mountings.
In   the   case   of   the   universal   and   semi-universal   ISOFIX   child   seats,   the   child   seat's   ISOFIX   size   category,   determined   by   a  
letter

  from   A to G,   is   indicated   on   the   child   seat   next   to   the   ISOFIX   logo.
Weight of the child   /   indicative   age
Less than 10 kg
(group 0)
Up   to   6   months  
approx
Less than 10 kg

(group 0)
Less than 13 kg (group 0+)
Up to 1 year approx From 9 to 18 kg
(group 1)
From   1   to   3   years   approx
type of ISOFIX child seat Infant car seat "rearward facing"
"rearward
facing" "forward facing"
ISOFIX size category F G
cdEcdA B B1
r
ow 2
(5   and   7*   seats)
o
uter
seats** IL-S u
IL-S
u
IL-S
u
I
u F, IL-S u
Centre seatn

ot ISOFIX
r

ow 3
(7   seats)
a
ll seats
n
ot ISOFIX
IL-S u : seat suitable for the installation
of a IS o FIX Semi- u niversal child seat,
either.
-
 
"rearward
  facing"   equipped   with   an  
upper strap or a support leg,
-

 
"forward
  facing"   equipped   with   a  
support leg,
-

 
a
  cot   equipped   with   an   upper   strap  
or

  a   support   leg.Remove
  and   stow   the   head  
restraint before installin

g a
child
  seat   with   a   backrest   on   a  
passenger

  seat.
Refit
  the   head   restraint   once   the   child  
seat

  has   been   removed.
I
u F: seat suitable for the installation
of an IS
o FIX u niversal child seat,
"Forward facing" and secured with an
upper
  strap. To attach the upper strap, refer to
chapter
  5,   "ISOFIX   mountings   section".
Child safety