2015 Citroen BERLINGO MULTISPACE seats

Berlingo-2-VP_en_Chap05_Securite_ed01-2015
131
CHILD SEAT AT THE FRONT
Refer to the legislation in your
country before installing your child
in
  this   seating   position.
Rearward facing Forward facing
When a forward facing child seat is
installed on the front passenger seat,
the
  passenger's   front   airbag   must  
remain

  active:
Adjust
  the   vehicle's   seat   to:
-
 
the
  fully   back   position,   with   the  
backrest

  straightened   for   a   seat  
without

  height   adjuster,
-
 
the
  fully   back   position   and  
highest

  position,   with   the   backrest  
straightened for a seat with height
adjuster

. Ensure that the seat belt is
correctly
  tensioned.
For child seats with a support leg,
ensure that this is in steady contact
with
  the   floor.   If   not,   adjust   the  
passenger

  seat.
Passenger seat in the fully back and
highest position.
When a rearward facing child seat is
installed on the front passenger seat,
the
 
passenger's
 
front
 
airbag
 
must
 
be
 
deactivated.

 
Otherwise
 
the child risks
being seriously injured or killed if
the airbag is deployed.
Adjust
 
the
 
vehicle's
 
seat
 
to:
-
 
the

 
fully
 
back
 
position,
 
with
 
the
 
backrest

 
straightened
 
for
 
a
 
seat
 
without

 
height
 
adjuster,
-
 
the

 
fully
 
back
 
and
 
highest
 
position,
 
with

 
the
 
backrest
 
straightened
 
for
 
a
 
seat

 
with
 
height
 
adjuster.
Child safety
SaFETY
5

Berlingo-2-VP_en_Chap05_Securite_ed01-2015
132
CHILD SEAT AT THE REAR
"Rearward facing"
When a "rearward facing" child seat is
installed on a rear passenger seat,
move
  the   vehicle's   front   seat   forwards  
and

  straighten   the   backrest   so   that   the  
"rearward facing" child seat does not
touch

  the   vehicle's   front   seat.
"Forward facing"
When a "forward facing" child seat is
installed on a rear passenger seat,
move  the   vehicle's   front   seat   forwards  
and

  straighten   the   backrest   so   that   the  
legs of the child in the "forward facing"
child seat do not touch the vehicle's
front

  seat.
Ensure that the seat belt is
correctly
  tensioned.
For child seats with a support leg,
ensure
  that   this   is   in   firm   contact   with  
the

  floor. When a child seat is installed on a
passenger seat in row 3, put the
backrests
  of   the   outer   and   centre   seats  
in row 2 forward of the seat occupied
by the child seat, in the table position,
or

  if   this   is   not   sufficient,   rermove   the  
seats in row 2 so that the child seat or
the the legs of the child do not touch
the

  seats   in   row   2.
Seats in row 3
a child seat with a support leg
must

  never   be   installed   on   a  
passenger seat in row 3

.
Child safety

Berlingo-2-VP_en_Chap05_Securite_ed01-2015
136
RECOMMENDED SEATS
Group 0+: from birth to 13 kgL1
"R
o MER Baby-Safe Plus"
Installed in the rearward facing position
Groups 2 and 3: from 15 to 36 kg L4
"KLIPPAN
  Optima"
From
  22 kg   (about   6   years),   the   booster   is   used   on   its   own.
L5
"RÖMER
k I d FIX"
Can
  be   fixed   on   the   vehicle's   ISOFIX   mountings.
The
  child   is   restrained   by   the   seat   belt.
CITROËN
 
offers
 
a
 
range
 
of
 
recommended
 
child   seats   which   are   secured using a three point seat belt.
Child safety

Berlingo-2-VP_en_Chap05_Securite_ed01-2015
 137
SEATS WITH A SUPPORT LEG
Care must be taken when installing a child seat with a support leg in
the
  vehicle.   In   particular   you   should  
look

  for   the   presence   of   a   storage  
compartment

  below   the   rear   seat  
footwells.
The centre rear seat does not have
a

  storage   compartment   below   the  
footwell.

 
Y
ou   can   therefore   easily   fit   a  
child seat with a support leg, whether
installed

  with   the   ISOFIX   mountings   or  
using

  the   3   point   seat   belt.
Do not place the support leg on
the storage compartment cover;
it
  might   break   in   a   serious   impact.  
Where

  the   adjustments   of   the   support  
leg allow it, we suggest two other
possibilities

  for   installation.
At the bottom of the storage
compartment
If the support leg is long enough, you
can  adjust   it   so   that   it   contact   the  
bottom

  of   the   storage   compartment.  
Remove

  all   objects   from   the   storage  
compartment

  before   installing   the  
support

  leg.
Away from the storage
compartment area
If the support leg is long enough and
can  be   inclined   sufficiently   (always  
by

  following   the   recommendations  
given in the installation instructions for
the child seat), you can position the
support

  leg   so   that   it   contacts   the   floor  
away

  from   the   storage   compartment.  
Adjust

  the   longitudinal   position   of  
the front or rear seat to obtain a
satisfactory position for the support leg
away

  from   the   storage   compartment.
If you cannot position the support
leg in the way described, you
should

  not   fit   a   child   seat   with  
support

  leg   to   the   seat.
Child safety
SaFETY
5

Berlingo-2-VP_en_Chap05_Securite_ed01-2015
138
LOCATIONS FOR CHILD SEATS SECURED WITH THE SEAT BELT
*  A child   seat   with   support   leg   must   never   be   installed   on   an   outer   passenger   seat   in   row   2,   unless   you   are   able   to   install   it  in
  line   with   the   recommendations   under   "Installing   a   child   seat   with   a   support   leg".
**
 
A 
child   seat   with   support   leg   must   never   be   installed   on   a   passenger   seat   in   row   3.
In accordance with European regulations, this table indicates the option\
s for installing child seats secured using a seat belt
and
  universally   approved   (a)   according   to   the   weight   of   the   child   and   the   seat   in   the   vehicle.
U:
seat suitable for the installation of a child seat secured using the sea\
t belt and universally approved, rearward facing
and/or

  forward   facing.Seat(s)
Weight of the child and indicative age
Under 13 kg
(groups 0 (b) and 0+)
Up to approx 1 year
From 9 to 18 kg

(group 1)
1 to 3 years approx
From 15 to 25 kg
(group 2)
3
  to   6   years  
approx
From 22 to 36 kg
(group 3)
6
 
to   10   years  
approx
Row 1 (c) (d) Passenger
seat U
UUU
Row 2 (e)
(5

 
and
 
7
 
seats)
o

uter seats U*U* UU
Centre seat UUUU
Row 3 (f) (g)
(7
 
seats)
a

ll seats U**U** UU
Child safety

Berlingo-2-VP_en_Chap05_Securite_ed01-2015
 139
(a)  Universal  child   seat:   child   seat  that can be installed in any vehicle
using
  the   seat   belt.
(b)
  
Group
  0:   from   birth   to   10   kg.  
Cots and baby carriers cannot be
installed on the front passenger
seat

  or   in   row   3.   When   installed   in  
row

  2,   they   may   prevent   the   use   of  
one

  or   more   seat   in   this   row.
(c)

Refer to the legislation in force in
your country before installin

g your
child
  on   this   seat.
(d)

When a rearward facing child seat
is installed on a

front passenger
seat, the passenger's front airbag
must
  be   deactivated.   Otherwise,  
the child would risk being
seriously injured or killed if the
airbag is deployed

.
When a forward facing child seat
is installed on a front passenger
seat, the passenger's front airbag
must
  remain   active. Remove
  and   stow   the   heads  restraint, before installin
g a child
seat
  with   backrest   on   a   passenger  
seat.
Refit

  the   head   restraint   once   the   child  
seat

  has   been   removed.
(e)
When a child seat is installed at
the rear
, forward facing or rearward
facing,
  move   the   vehicle's   seats  
in the row in front forwards and
straighten

  their   backrests   to   leave  
enough space for the child seat or
the

  child's   legs.
(f)
   
Put
  the   backrests   of   the   outer   and  
centre seats in row 2, located in
front of seat occupied by a child
seat, in the table position, or if this
is

  not   sufficient,   remove   the   seats   in  
row 2, so that the child seat or the
child's legs do not touch the seats
in

  row   2.
(g)

If the seats in row 3 are occupied,
do not leave a child seat installed
on the foldable row 2 seat, to allow
easy

  access   to   row   3.
Child safety
SaFETY
5

Berlingo-2-VP_en_Chap05_Securite_ed01-2015
140
ISOFIx MOUNTINGS
Your vehicle has been approved in
accordance  with   the   latest   ISOFIX   regulation.
The
  mountings   comprise   three   rings   for   each
 seat.
Two front rings A, located between
the  vehicle   seat   backrest   and   cushion,  
indicated

  by   a   marking.
a rear ring
B,   located   on   the   back  
of

  the   vehicle's   seat   backrest,   for  
securing the upper strap referred to as
the

 
T
op  
T
ether.
The Top Tether is used to secure the
upper strap of child seats that have
one.  
This
  arrangement   limits   the  
forward tipping of the child seat in the
event

  of   a   frontal   impact.
This   ISOFIX   mounting   system  
guarantees you fast, reliable and safe
fitting

  of   the   child   seat   in   your   vehicle.
The   ISOFIX   child   seats   are   fitted   with  
two latches which are secured on the
two front rings

A.
Some   also   have   an   upper   strap   which  is attached to the rear ring
B.Follow strictly the instructions for
fitting
  child   seats   contained   in   the  
manufacturer's

  installation   guide.
To secure the child seat to the
Top Tether:
-  
remove
  and   stow   the   head   restraint  
before installin

g the child seat in
this   seating   position   (refit   it   once  
the

  child   seat   has   been   removed),
-
pass the upper strap of the child
seat over the top of the seat
backrest,

  between   the   apertures   for  
the head restraint rods,
-
 
secure
  the   hook   on   the   upper   strap  
to the rear ring,
-
 
tighten
  the   upper   strap.
The incorrect installation of a child
seat   in   a   vehicle   compromises   the  
protection of the child in the event
of

  an   accident.
Refer   to   the   table   for   information   on  
the installation of IS

o FIX child seats in
your
  vehicle.
Child safety

Berlingo-2-VP_en_Chap05_Securite_ed01-2015
141
This child seat can also be used on seats which are not fitted with ISOFIX mountings.
In  this   case,   it   must   be   attached   to   the   vehicle   seat   using   the   three   point   seat  
belt.
Follow the instructions for fitting the child seat given in the

seat
manufacturer's installation guide.
Recommended ISOFIx seat
"ISOFIx RÖMER DUO plus"
(size category B1)
Group 1: from 9 to 18 kg
Installed
  only   in   the   forward   facing   position.
Secured to rings A, as well as ring B, called the Top Tether, using
  an   upper   strap.
Three
  seat   body   angles:   sitting,   reclining,   lying.
Child safety
SaFETY
5