2015 Citroen BERLINGO MULTISPACE fold seats

85
Berlingo-2-VP_en_Chap04_Ergonomie_ed01-2015Berlingo-2-VP_en_Chap04_Ergonomie_ed01-2015
Row 3 seat adjustments
Placing the seat backrest in the
table position
- 
Lower
  the   head   restraint   fully.
-
o perate the control to fold the seat
backrest
  onto   the   seat   cushion.
Returning the seat backrest to the
sitting position
-
 
Release
  the   seat   backrest   by  
pullin

g the control, then return it to
its
  original   position.
-
 
Check
  that   it   has   correctly   locked   in  
place. Returning the seat to its original
position
-

 
Push
  the   red   control.
-
 
Unfold
  the   entire   seat.
Placing the seat in the fully folded
position
-
 
Place
  the   seat   in   the   table   position.
-
 
Raise
  the   bar   fitted   with   a   red  
strap, located behind the seat, to
release

  feet   of   the   seat   from   their  
anchorage

  on   the   floor.
-
 
T
ilt   the   entire   seat   forwards.Ensure
  that:
-
 
the
  seat   is   locked   securely   on  
the

  floor,
-

the seat belt is available for
the

  passenger.
EaSE oF USE and CoMFoRT
4
Seats

86
Berlingo-2-VP_en_Chap04_Ergonomie_ed01-2015Berlingo-2-VP_en_Chap04_Ergonomie_ed01-2015
Entering, exiting from Row 3
Entering
-
Place the row 2 seat in the table
position.
Exiting
-

 
Lower
  the   head   restraint   fully.
-
o perate the yellow control, located
on
  the   back   of   the   row   2   seat  
backrest.
-

 
Fold
  the   seat   backrest   to   the   table  
position.Ensure that the centre seat belt is
stowed correctly in its housing in
the

  headlining.
-

T
ilt it to the fully folded position to
allow
  access. -

Pull the red strap to place the seat
in

  the   fully   folded   position.
-  T ilt   the   entire   seat   forwards.
-  
Exit
  via   the   side   door.
Before
  folding   it   back,   ensure   that  
the feet of the passenger in row 3
are not obstructing the row 2 seat
anchoring

  points.
Seats

 87
Berlingo-2-VP_en_Chap04_Ergonomie_ed01-2015Berlingo-2-VP_en_Chap04_Ergonomie_ed01-2015
Removing a seat
- 
If
  necessary,   move   the   front   seats  
forward.
-

 
Lower
  the   head   restraint.
-

Place the seat in the fully folded
position.
-


T
ilt the entire seat forwards then
lift it. Refitting the seat
The label on the seat indicates the
position
  in   which   it   must   be   installed.
-
 
Place
  the   hooks   of   the   front   feet  
between

  the   two   bars.
-
 
Fold
  back   the   seat   to   fix   the   rear  
anchoring

  points.
-
o perate the control to raise the
seat
  back   to   its   initial   position.
-
 
Raise
  the   head   restraint.Ensure
  that   no   object   or   foot   of   a  passenger seated in the rear is
obstructing the anchorage points
or
  preventing   correct   locking   of  
the

  seat.
Operating the Row 2 seats
EASE OF USE and COMFORT
4
Seats

88
Berlingo-2-VP_en_Chap04_Ergonomie_ed01-2015Berlingo-2-VP_en_Chap04_Ergonomie_ed01-2015
Operating the Row 3 seats
Removing the seat
- 
Lower
  the   head   restraint.
-

Place the seat in the fully folded
position.
-

 
T
ilt   the   entire   seat   forwards.
-
 
On
  each   side,   take   hold   of   the  
uprights of the folded seat, tilting it
forward

  slightly,   and   lift   it.Refitting the seat
The label on the seat indicates the
position
  in   which   it   must   be   installed.
-
 
Place
  the   hooks   of   the   front   feet  
between

  the   two   bars.
-
 
Ensure
  that   no   object   or   foot   is  
obstructing the rear anchorage
points and that the seat belt is
positioned correctly and available
for

  use.
-
 
Fold
  back   the   seat   to   fix   its   rear  
anchoring

  feet.
-
o perate the control to raise the
seat
  back   to   its   initial   position.
-
 
Raise
  the   head   restraint.
Good practice
Following the various operations:
-  
do
  not   remove   a   head   restraint  
without stowing it; secure it inside
the vehicle,
-


ensure that the passengers can
always access the seat belts and
fasten

  them   easily,
-
 
passengers
  must   never   take  
their

  seat   without   adjusting   and  
fastening

  their   seat   belt.
-
 
a
  passenger   seated   in   row   3   must  
ensure that he does not obstruct
the row 2 seat anchorage points,
-

 
a
  passenger   seated   in   row   3   must  
not

  have   the   seat   in   front   of   them   in  
row 2 in the folded position; this is
in case the seat could tip towards
the passenger unexpectedly and
injure

  them.
Do
  not   place   hard   or   heavy   objects   on  
the

  seat   backs   forming   a   table,   they  
could

  become   dangerous   projectiles   in  
the

  event   or   sharp   braking   or   impact.
Seats

102
Berlingo-2-VP_en_Chap04_Ergonomie_ed01-2015Berlingo-2-VP_en_Chap04_Ergonomie_ed01-2015
LOAD SPACE COVER (5 SEAT VERSION)
This rigid shelf conceals the objects stored  in   the   boot. Removing
Fold
  the   load   space   cover.
Detach   it   from   the   notches   A and B
pulling
  it   towards   you.
Raise
  it   and   remove   the   assembly.
Refitting
Place the load space cover in front
of A and B.
Push it forwards to insert the lugs in
the
  notches.
Unfold and clip into the notches C.
Folding
From
  the   boot,   fold   the   half-shelf,  
raising

  it   to   detach   it   from   the   notch   C. Storing (according to version)
A 
location   is   provided   in   the   back   of   the  rear
  seats   to   accommodate   the   load  
space

  cover   folded   onto   itself.
Slide it vertically between the side
guides
  located   at   mid   seat   back   height.
Insert
  the   hinge   first,   with   the   free   flaps  
turned

  upwards.
This rigid load space cover can
form
  a   shelf.   However,   as   a   safety  
measure,

  do   not   place   objects  
on

  it   which   could   become   dangerous  
projectiles

  in   the   event   of   sharp   braking  
or

  rear   impact.
Practical information

106
Berlingo-2-VP_en_Chap04_Ergonomie_ed01-2015Berlingo-2-VP_en_Chap04_Ergonomie_ed01-2015
BLIND, LOAD SPACE COVER
Position the load space screen so as to
present  the   rear   load   space   cover   flaps  
towards

  you.
Engage the left-hand lug of the roller in
the support A.
The load space cover is the roller blind
type.
 
T

ake
 
care
 
not
 
to
 
place
 
heavy
 
objects

 
on
 
the
 
load
 
space
 
cover
 
when
 
unreeled.
Compress
  then   place   the   right-hand  lug facing the support
B.
Release to engage the roller in its
support.
Unroll the load space cover to the rear
side
  pillars.
Engage the ends in the rear notches to
keep
  it   taut.
To install it
Place the row 3 seats in the fully folded
position.
Raise
 
the
 
storage
 
flap
 
at
 
the
 
boot
 
sill.
Take
 
hold
 
of
 
the
 
roller
 
in
 
the
 
centre
 
and
 
compress

 
it
 
towards
 
the
 
left-hand
 
pillar.
Raise
 
the
 
assembly.
Practical information

Berlingo-2-VP_en_Chap05_Securite_ed01-2015
125
Rear seat belts
(7 seat version)
In row 2
The  three   seats   are   fitted   with   three-
point
  inertia   reel   seat   belts.
When folding the side seats or the
seat
  backs   to   the   table   position,   avoid  
trapping the strap of the centre seat
belt.
When handling the side seats
(removing/installin

g)   or   when  
accessing

  row   3,   avoid   hooking   the  
centre

  seat   belt.
Ensure that the centre seat belt is
rolled up correctly in its strengthener
on
  the   roof. In row 3
The
  two   seats   are   fitted   with   three-
point   inertia   reel   seat   belts.d
o not attach the seat belts to the
stowing
  rings   marked   with   a   red   cross,  
represented

  on   the   label.
Take
  care   to   hook   the   seat   belts  
correctly on the rings provided for this
purpose.The row 3 seat belts which are not in
use can be stored to clear the load
space

  and   make   use   of   the   load   space  cover
  easier.
Hook   the   snap   hook   in   the   location  provided
  on   the   rear   pillar   trim.
Seat belts
SaFETY
5

Berlingo-2-VP_en_Chap05_Securite_ed01-2015
 139
(a)  Universal  child   seat:   child   seat  that can be installed in any vehicle
using
  the   seat   belt.
(b)
  
Group
  0:   from   birth   to   10   kg.  
Cots and baby carriers cannot be
installed on the front passenger
seat

  or   in   row   3.   When   installed   in  
row

  2,   they   may   prevent   the   use   of  
one

  or   more   seat   in   this   row.
(c)

Refer to the legislation in force in
your country before installin

g your
child
  on   this   seat.
(d)

When a rearward facing child seat
is installed on a

front passenger
seat, the passenger's front airbag
must
  be   deactivated.   Otherwise,  
the child would risk being
seriously injured or killed if the
airbag is deployed

.
When a forward facing child seat
is installed on a front passenger
seat, the passenger's front airbag
must
  remain   active. Remove
  and   stow   the   heads  restraint, before installin
g a child
seat
  with   backrest   on   a   passenger  
seat.
Refit

  the   head   restraint   once   the   child  
seat

  has   been   removed.
(e)
When a child seat is installed at
the rear
, forward facing or rearward
facing,
  move   the   vehicle's   seats  
in the row in front forwards and
straighten

  their   backrests   to   leave  
enough space for the child seat or
the

  child's   legs.
(f)
   
Put
  the   backrests   of   the   outer   and  
centre seats in row 2, located in
front of seat occupied by a child
seat, in the table position, or if this
is

  not   sufficient,   remove   the   seats   in  
row 2, so that the child seat or the
child's legs do not touch the seats
in

  row   2.
(g)

If the seats in row 3 are occupied,
do not leave a child seat installed
on the foldable row 2 seat, to allow
easy

  access   to   row   3.
Child safety
SaFETY
5