2015 BUICK ENCLAVE instrument cluster

3
Refer to your Owner Manual to learn about the information being relayed \
by the lights, gauges and
indicators on the instrument cluster.
See In Brief in your Owner Manual.
F Optional equipment
Driver Information
Center ButtonsF
Audio System/ Navigation System
FHazard Warning Flashers Button
Accessory Power Outlet
USB
Port
Driver’s
Heated/
Cooled Seat Buttons
F
Rear Wiper Switch/
Traction Control Off Button/Tow/
Haul Mode Button
F/
Power Liftgate Switch
F
Passenger’s Heated/
Cooled Seat Buttons
F
Lane Departure
Warning ButtonF/
Forward Collision Alert Button
F
Climate
Controls

7
Audio Steering Wheel ControlsCruise Control
F Optional equipment
Volume
Pull up the + or – button to adjust the
volume.
SRCE Source
Press to select an audio source. Next/Previous
Press the up or down arrow to go to the
next or previous favorite radio station,
track, or file.
Seek
Press to go to the next radio station on the
same band or CD track.
Push to Talk/Mute
Press to start voice recognition to
interact with the audio, OnStar
®, Bluetooth
or navigationF system.
Press and hold for two seconds to mute
the speakers.
End Call
Press to end or reject an OnStar or a
Bluetooth call.
Setting Cruise Control
1. Press the
On/Off button. The
Cruise Control symbol will illuminate in
white on the instrument cluster.
2. When traveling at the desired speed,
press the SET/– button to set the speed.
The
symbol will illuminate in green
on the instrument cluster.

Adjusting Cruise Control
RES/+ Resume/Accelerate
Press to resume a set speed.
When the system is active, press to
increase speed.
SET/– Set/Coast
When the system is active, press to
decrease speed.

Cancel
Press to cancel the cruise control but retain
the set speed in memory.
Pressing the brake pedal also will cancel
the cruise control.
The cruise control set speed is erased
when cruise control or the vehicle ignition
is turned off.
See Driving and Operating in your Owner Manual.
See Instruments and Controls in your Owner Manual.

13
Driver Assistance Systems
F Optional equipment
The driver assistance systems use advanced technologies to help avoid collisions by
providing visual and audible alerts under some imminent collision conditions.
Lane Departure Warning
F – When crossing a detected lane marking without using a turn
signal, the system flashes an amber visual alert on the instrument cluster.
Press the Lane Departure Warning button (A) on the center of the instrument panel
to turn the system on or off.
Forward Collision Alert
F – When approaching a vehicle directly ahead too quickly,
the system flashes a visual alert.
The
Vehicle Ahead indicator will illuminate in green on the instrument cluster when a
vehicle is detected and will illuminate in amber when following a vehicle ahead too closely.
If your vehicle approaches another vehicle too rapidly, the collision alert will flash on the
windshield and beep rapidly.
Press the Collision Alert button (B)
on the center of the instrument panel to
set the alert sensitivity to Far, Medium,
Near, or Off. The setting is displayed in
the Driver Information Center.
Side Blind Zone Alert
F – While driving, the
Side Blind Zone Alert displays a
warning
symbol on the left or right side mirror when
a vehicle is detected in that side blind zone
area. The warning symbol flashes if a turn
signal is activated when a vehicle has been detected.
To turn the system on or off, go to the Vehicle Information menu in the Driver
Information Center.
Rear Vision Camera – Provides a view directly behind the vehicle when backing up.
To turn the Rear Vision Camera Guidelines or Rear Park Assist Symbols on or off, go to
Settings > Rear Camera.
Rear Cross Traffic Alert
F – Warns of traffic coming in either direction behind the vehicle
by displaying a visual alert on the Rear Vision Camera display.
To turn the system on or off, go to the Vehicle Information menu in the Driver
Information Center.
Rear Parking Assist – When the vehicle is in Reverse, detected objects are indicated by
audible beeps. The interval between beeps becomes shorter as the vehicle\
gets closer to
an object. When the distance is less than 12 in. (30 cm), the beeps ar\
e continuous. The
system only operates at speeds less than 5 mph.
To turn the system on or off, go to the Vehicle Information menu in the Driver
Information Center.
See Driving and Operating in your Owner Manual.
AB

15
Wind NoiseTowing
Battery Location
Tire Pressure Monitor
If a rear window is open, there may be a buffeting wind noise inside the\
vehicle. Opening a
front window slightly when a rear window is open will prevent this noise from occurring.
See Keys, Doors and Windows in your Owner Manual.
The Enclave base towing capacity is 2,000 lbs. Vehicles equipped with the Trailer Towing
Package have a towing capacity of 4,500 lbs.
Use the Tow/Haul mode
F when pulling a heavy trailer to reduce the frequency of
transmission shifts and improve the control of vehicle speed.
To turn the Tow/Haul mode on or off, press the Tow/Haul button on the
center console.
See Driving and Operating in your Owner Manual.
The battery is located beneath the floor behind the front passenger seat. Jump-start posi-
tive and negative posts are located under the hood on the passenger’s\
side of the vehicle.
See Vehicle Care in your Owner Manual.
The Low Tire Pressure warning light on the instrument cluster illuminates when one
or more of the vehicle’s tires is significantly underinflated. Fill the tires to the proper tire
pressures. The proper tire pressures for the vehicle are listed on the T\
ire and Loading
Information label, located below the driver’s door latch. Current tir\
e pressures can be
viewed in the Driver Information Center.
Tire pressure is affected by cold weather and distance driven. If the low tire pressure
warning light illuminates when the vehicle is first started in cooler temperatures and then
turns off as the vehicle is driven, check for the proper tire pressures.\
Refer to your Owner Manual for additional information about normal monthly tire maintenance.
See Vehicle Care in your Owner Manual.
F Optional equipment