2015 BMW ACTIVE HYBRID 7 run flat

[x] Cancel search: run flat

Page 121 of 262

BMW ACTIVE HYBRID 7 2015 F01H Owners Manual 3.  "Perform reset"4.Start the engine - do not drive off.5.Start the initialization with "Perform reset".6.Drive away.
The initialization is completed while driving,
which can be interrupted at any ti

Page 123 of 262

BMW ACTIVE HYBRID 7 2015 F01H Owners Manual One wheel is yellowA flat tire or major drop in inflation pressure in
the indicated tire.
All wheels are yellow
A flat tire or major drop in inflation pressure in
several tires.
Wheels, gray
The syste

Page 124 of 262

BMW ACTIVE HYBRID 7 2015 F01H Owners Manual If the tire inflation pressure in all four tires
is shown to be correct, it is possible that
the Tire Pressure Monitor did not perform
a reset. Then perform the reset.
If an identification is not poss

Page 214 of 262

BMW ACTIVE HYBRID 7 2015 F01H Owners Manual RSC – Run-flat tires
Run-flat tires, refer to page  212, are labeled
with a circular symbol containing the letters
RSC marked on the sidewall.
M+S Winter and all-season tires with better cold
weathe

Page 216 of 262

BMW ACTIVE HYBRID 7 2015 F01H Owners Manual Maximum speed of winter tiresIf the maximum speed of the vehicle is higher
than the permissible speed for the winter tires,
then a respective symbol is displayed in your
field of vision. You can obtai

Page 217 of 262

BMW ACTIVE HYBRID 7 2015 F01H Owners Manual ▷Use of the Mobility System may be ineffec‐
tive if the tire puncture measures approx.
1/8 in/4 mm or more.▷Contact the nearest service center if the
tire cannot be made drivable.▷If possible,

Page 218 of 262

BMW ACTIVE HYBRID 7 2015 F01H Owners Manual 3.Screw the connection hose onto the con‐
nector of the sealant container.4.Insert the sealant container on the com‐
pressor housing in an upright position.5.Screw the filling hose of the sealant

Page 219 of 262

BMW ACTIVE HYBRID 7 2015 F01H Owners Manual If a tire inflation pressure of 2 bar cannot be
reached, contact your service center.
Stowing the Mobility System
1.Unscrew the filling hose of the sealant con‐
tainer from the wheel.2.Unscrew the c
Page:   1-8 9-16 next >