Page 227 of 257

Breakdown assistanceVehicle features and options
This chapter describes all standard, country-
specific and optional features offered with the
series. It also describes features that are not
necessarily available in your car, e. g., due to
the selected options or country versions. This
also applies to safety-related functions and
systems. The respectively applicable country
provisions must be observed when using the
respective features and systems.
Hazard warning flashers
The button is located in the center console.
Intelligent Emergency
Request
The concept In case of an emergency, an Emergency Re‐
quest can be made through this system.
General information
Only press the SOS button in an emergency.
Hints
Emergency Request not guaranteed
For technical reasons, the Emergency
Request cannot be guaranteed under unfavor‐
able conditions.◀
Overview
SOS button in the roofliner
Requirements
▷The SIM card integrated in the vehicle has
been activated.▷The radio-ready state is switched on.▷The Assist system is functional.
Initiating an Emergency Request
1.Press the cover briefly to open it.2.Press the SOS button until the LED at the
button lights up green.▷The LED lights up green: an Emergency
Request was initiated.
If a cancel prompt appears on the display,
the Emergency Request can be aborted.
If the situation allows, wait in your vehicle
until the voice connection has been estab‐
lished.▷The LED flashes green when a connection
to the BMW Response Center has been
established.Seite 223Breakdown assistanceMobility223
Online Edition for Part no. 01 40 2 960 440 - II/15
Page 233 of 257

CareVehicle features and optionsThis chapter describes all standard, country-
specific and optional features offered with the
series. It also describes features that are not
necessarily available in your car, e. g., due to
the selected options or country versions. This
also applies to safety-related functions and
systems. The respectively applicable country
provisions must be observed when using the
respective features and systems.
Car washes General information
Regularly remove foreign objects such as
leaves in the area below the windshield when
the hood is raised.
Wash your vehicle frequently, particularly in
winter. Intense soiling and road salt can dam‐
age the vehicle.
Hints Steam jets or high-pressure washers
When using steam jets or high-pressure
washers, hold them a sufficient distance away
and use a maximum temperature of
140 ℉/60 ℃.
If the vehicle has a glass sunroof, ensure that a
distance of at least 31.5 inches/80 cm is main‐
tained. Holding them too close or using exces‐
sively high pressures or temperatures can
cause damage or preliminary damage that may
then lead to long-term damage.
Follow the user's manual for the high-pressure
washer.◀Cleaning sensors/camera lenses with
high-pressure washers
When using high-pressure washers, do not
spray the sensors and camera lenses on the
outside of the vehicle for long periods and
maintain a distance of at least 12 in/30 cm.◀
Automatic car washes
Hints▷Give preference to cloth car washes or
those that use soft brushes in order to
avoid paint damage.▷Make sure that the wheels and tires are not
damaged by the transport mechanisms.▷Fold in the exterior mirrors; otherwise, they
may be damaged, depending on the width
of the vehicle.▷Deactivate the rain sensor, refer to
page 70, to avoid unintentional wiper acti‐
vation.▷In some cases, an unintentional alarm can
be triggered by the interior motion sensor
of the alarm system. Follow the instruc‐
tions on avoiding an unintentional alarm,
refer to page 45.
Guide rails in car washes
Avoid car washes with guide rails higher
than 4 in/10 cm; otherwise, the vehicle body
could be damaged.◀
Before driving into a car wash In order to ensure that the vehicle can roll in a
car wash, take the following steps:
Manual transmission:
1.Drive into the car wash.2.Shift to neutral.Seite 229CareMobility229
Online Edition for Part no. 01 40 2 960 440 - II/15
Page 235 of 257

mediately to prevent the finish from being al‐
tered or discolored.
Leather care Remove dust from the leather often, using a
cloth or vacuum cleaner.
Otherwise, particles of dust and road grime
chafe in pores and folds, and lead to increased
wear and premature degradation of the leather
surface.
To guard against discoloration, such as from
clothing, provide leather care roughly every
two months.
Clean light-colored leather more frequently be‐
cause soiling on such surfaces is substantially
more visible.
Use leather care products; otherwise, dirt and
grease will gradually break down the protective
layer of the leather surface.
Suitable care products are available from the
service center.
Upholstery material care Vacuum regularly with a vacuum cleaner.
If upholstery is very dirty, e.g., with beverage
stains, use a soft sponge or microfiber cloth
with a suitable interior cleaner.
Clean the upholstery down to the seams using
large sweeping motions. Avoid rubbing the
material vigorously.
Damage from Velcro® fasteners
Open Velcro® fasteners on pants or
other articles of clothing can damage the seat
covers. Ensure that any Velcro® fasteners are
closed.◀
Caring for special components
Light-alloy wheels
When cleaning the vehicle, use only neutral
wheel cleaners having a pH value from 5 to 9.
Do not use abrasive cleaning agents or steamjets above 140 ℉/60 ℃. Follow the manufac‐
turer's instructions.
Aggressive, acidic or alkaline cleaning agents
can destroy the protective layer of adjacent
components, such as the brake disk.
Chrome surfaces
Carefully clean components such as the radia‐
tor grille or door handles with an ample supply
of water, possibly with shampoo added, partic‐
ularly when they have been exposed to road
salt.
Rubber components Aside from water, treat only with rubber
cleansers.
When cleaning rubber seals, do not use any
silicon-containing car care products in order to
avoid damage or noises.
Fine wood partsClean fine wood facing and fine wood compo‐
nents only with a moist rag. Then dry with a
soft cloth.
Plastic components
These include:▷Imitation leather surfaces.▷Roofliner.▷Lamp lenses.▷Instrument cluster cover.▷Matt black spray-coated components.▷Painted parts in the interior.
Clean with a microfiber cloth.
Dampen cloth lightly with water.
Do not soak the roofliner.
No cleansers that contain alcohol or sol‐
vents
Do not use cleansers that contain alcohol or
solvents, such as lacquer thinners, heavy-duty
Seite 231CareMobility231
Online Edition for Part no. 01 40 2 960 440 - II/15
Page 240 of 257

Technical dataVehicle features and options
This chapter describes all standard, country-
specific and optional features offered with the
series. It also describes features that are not
necessarily available in your car, e. g., due tothe selected options or country versions. This
also applies to safety-related functions and
systems. The respectively applicable country
provisions must be observed when using the
respective features and systems.
Note
The technical data and specifications in this
Owner's Manual are used as guidance values.
The vehicle-specific data can deviate from this,
for example, due to the selected special equip‐
ment, country version or country-specific
measurement method. Detailed values can befound in the approval documents, on informa‐
tion signs on the vehicle or can be obtained
from the service center.
The information in the vehicle documents al‐
ways has priority.
Dimensions
The dimensions can vary depending on the
model version, equipment or country-specific
measurement method.
The specified heights do not take into account
attached parts, for example, a roof antenna,roof racks or spoiler. The heights can deviate,
for example, due to the selected special equip‐
ment, tires, load and chassis version. BMW 3 Series LimousineWidth with mirrorsinches/mm80.0/2,031Width without mirrorsinches/mm71.3/1,811Heightinches/mm56.3–56.5/1,429–
1,434Lengthinches/mm182.2/4,627Wheelbaseinches/mm110.6/2,810Smallest turning radius diam.ft/m37.1–38.4/11.3–11.7
Weights
The values preceding the slash apply to vehi‐
cles with manual transmission; the values fol‐lowing the slash apply to vehicles with Step‐
tronic transmission.Seite 236ReferenceTechnical data236
Online Edition for Part no. 01 40 2 960 440 - II/15
Page 241 of 257
320iApproved gross vehicle weightlbs
kg
4,355/4,400
1,975/1,996
Loadlbs
kg
900
408
Approved front axle loadlbs
kg
2,005
909
Approved rear axle loadlbs
kg
2,525
1,145
Approved roof load capacitylbs
kg
165
75
Cargo area capacitycu ft
Liters
17.0
480
328iApproved gross vehicle weightlbs
kg
4,420/4,455
2,005/2,021
Loadlbs
kg
900
408
Approved front axle loadlbs
kg
2,040
925
Approved rear axle loadlbs
kg
2,545
1,154
Approved roof load capacitylbs
kg
165
75
Cargo area capacitycu ft
Liters
17.0
480
Seite 237Technical dataReference237
Online Edition for Part no. 01 40 2 960 440 - II/15
Page 242 of 257
335iApproved gross vehicle weightlbs
kg
4,565/4,585
2,071/2,080
Loadlbs
kg
900
408
Approved front axle loadlbs
kg
2,160
980
Approved rear axle loadlbs
kg
2,570
1,166
Approved roof load capacitylbs
kg
165
75
Cargo area capacitycu ft
Liters
17.0
480
320i xDriveApproved gross vehicle weightlbs
kg
4,542/4,585
2,060/2,080
Loadlbs
kg
900
408
Approved front axle loadlbs
kg
2,140
971
Approved rear axle loadlbs
kg
2,580
1,170
Approved roof load capacitylbs
kg
165
75
Cargo area capacitycu ft17.0
480
Seite 238ReferenceTechnical data238
Online Edition for Part no. 01 40 2 960 440 - II/15Liters
Page 243 of 257
328i xDriveApproved gross vehicle weightlbs
kg
4,610
2,091
Loadlbs
kg
900
408
Approved front axle loadlbs
kg
2,170
984
Approved rear axle loadlbs
kg
2,580
1,170
Approved roof load capacitylbs
kg
165
75
Cargo area capacitycu ft
Liters
17.0
480
335i xDriveApproved gross vehicle weightlbs
kg
4,695/4,720
2,130/2,141
Loadlbs
kg
900
408
Approved front axle loadlbs
kg
2,280
1,034
Approved rear axle loadlbs
kg
2,580
1,170
Approved roof load capacitylbs
kg
165
75
Cargo area capacitycu ft
Liters
17.0
480
Seite 239Technical dataReference239
Online Edition for Part no. 01 40 2 960 440 - II/15
Page 244 of 257
328dApproved gross vehicle weightlbs
kg
4,420
2,005
Loadlbs
kg
860
390
Approved front axle loadlbs
kg
2,015
914
Approved rear axle loadlbs
kg
2,535
1,150
Approved roof load capacitylbs
kg
165
75
Cargo area capacitycu ft
Liters
17.0
480
328d xDriveApproved gross vehicle weightlbs
kg
4,620
2,096
Loadlbs
kg
860
390
Approved front axle loadlbs
kg
2,170
984
Approved rear axle loadlbs
kg
2,580
1,170
Approved roof load capacitylbs
kg
165
75
Cargo area capacitycu ft
Liters
17.0
480
Seite 240ReferenceTechnical data240
Online Edition for Part no. 01 40 2 960 440 - II/15