2015 AUDI A8 turn signal

48 Clear vision
Automatic headlights
You can adjust the following settings in the
Automatic headlights menu:
Headlights a ctivation time -You can adjust if
the head lights switch on
Early , Med. or Late
according to the sensitivity of the light sensor.
Audi adaptive light* -You can switch adaptive
light
On and Off.
Automatic high beams*
You can switch the high beam assist on and
off .
Daytime running lights
USA models :
You can switch the daytime run ­
ning lights
on and off .
Canada models:
The function cannot be
turned off. It is activated automatica lly each
time the ignition is switched on . This menu
item is shown "greyed out".
Coming home, Leaving home
The coming home function illuminates the
area outside the vehicle when you switch the
ignition off and open the driver's door. To turn
the function on, select
Lights when leaving
car> On.
The leaving home function illuminates the
area outside the vehicle when you un lock the
ve hicle . To turn the funct ion on, select
Lights
when unlocking car > On .
The coming home and leaving home functions
on ly operate when it is dark and the light
switch is in the
AUTO position.
Turn signal and high beam lever
The lever on the left side of the steering col­
umn is used to operate the turn signals and
the high beam as well as the headlight flash­
er.
Fig. 42 Tu rn signal and high beam lever
The turn signa l and high beam lever has the
following functions:
Turn signals ¢ 9 (D@
.. Push the lever up as far as it can go to turn
on the right turn signal or down to turn on
t he left turn signal
¢ fig. 42 .
N 0 ... 'i' :r
~
.. Move the lever briefly until you meet res ist·
ance and re lease it to flash three times.
.. Move the lever (up or down) until you meet
resistance and hold it there to determine
the flashing time for the turn signals.
High beam [D @
.. Push the lever forward to switch on the high
beam (vehicles with high beam assist*
¢page49).
.. Pull the lever back towards you to switch off
the high beam .
Headlight flasher [D ©
.. Pull the lever toward the steering wheel to
use the headlight flasher.
Notes on these features
-The turn signals only work w ith the ignition
switched on. The indicator lights
ID or iPJ
in the instrument cluster ¢page 11 also
blink.
- After you have t urned a corner, the turn sig -
na l switches off automatically .
Ill>

86 On the road
driving force has been built up at the
wheels.
E mergency brake function
An emergency brake ensures t hat the vehicle
can be slowed down even if the
normal brakes
fail
c::> page 87, Emergency braking .
&_ WARNING
Do not press the accelerator peda l inadver ­
tently if the vehicle is stationary but the
engine is running and a gear is selected.
Otherw ise the vehicle will start to move
immediately and could result in a crash.
- If the parking brake is applied with the
ignition switched off, the indicator lights
in the sw itch and . (USA models) .
(Canada models) in the instrument clus­
ter will go out after a certain per iod of
time.
- Occas iona l noises when the park ing
brake is applied and released are normal
and are not a cause for concern.
- When the vehicle is parked, the parking brake goes through a self-test cycle at
regular intervals. Any assoc iated noises
are no rma l.
Parking
.. Press the bra ke peda l to stop the vehicle .
.. Pull the switch© to set the parking brake .
.. Se lect the P selector lever position
c::> page 114.
.. Turn the eng ine off c::> ,& .
.. When on incl ines or declines, turn the steer­
ing wheel so that your vehicle will roll into
the curb if it begins to move.
&_ WARNING
- When you leave your veh icle - even if on­
ly b riefly - always take the ignition key
with you. This applies par tic u larly when
children remain in the veh icle . Otherw ise
the chi ldren could start the engine, re-
'
lease the parking brake or operate elec­
tr ica l equipment (e.g. power windows).
There is the r isk of an accident.
- When the veh icle is locked, no one - par­
ticularly not children should rema in in
the vehicle. Locked doors make it more difficult for emergency workers to get in­
to the vehicle - putting lives at risk.
Starting from rest
The starting assist function ensures that the
parking brake is released automatically upon
starting.
Stopping and applying par king brake
.. Pull the sw itch<®> to apply the parking
brake.
Sta rting and automaticall y rel easing the
park ing bra ke
.. When you start to drive as usual, the park­
ing brake is automat ically released and your
veh icle beg ins to move.
When stopping at a traffic signal or stopping in city traffic, the parking brake can be ap­
plied . The vehicle does not have to be held
with the footbrake. The parking brake elimi­ nates the tendency to creep w ith a dr ive range
engaged . As soon as you drive off as usual,
t h e pa rking brake is re leased automatically
and the vehicle s tarts to move .
Sta rting on slopes
When starting on inclines, the starting assist
prevents the vehicle from u nintent ionally roll­
i ng back. The braking force of the parki ng
brake is not re leased unti l suffic ient d riving
force has been built up at the w heels.
(D Tips
Fo r safety reasons, the pa rking brake is re­
l eased automatically on ly when the d riv ­
er's safety belt is engaged in the buckle.

102 Audi active lane assist
Activating and deactivating
Applies to vehicles: with active lane assist
-
I
Fig. 107 Turn signal lever: Act ive lan e ass ist button
Fig. 108 Windshield: Active lane assist camera viewin g
win dow
~ Press the ¢ fig. 10 7 button to activate or
deactivate the system . The indicator light
• or. in the instrument cluster will illu­
minate or go out.
Instrument cluster indicator light
• Ready: The indicator light shows that the
system is ready to use . The system can now
warn you if you are about to cross a known
lane marker line .
• Not ready: The ind icator light shows that
the system is turned on but unable to send a
warning . This can be due to the following :
- There is no lane marker line .
- The relevant lane marker lines are not de-
tected (for example, markings in a construc­
tion zone or because they are obstructed by
snow, dirt, water or backlight ing).
- The vehicle 's speed is below the speed need ­
ed to activate it, which is about 40 mph (65
km/h) .
- The lane is narrower than about 8 ft . (2 .5 m)
or wider than 15 ft (4 .5 m).
- The curve is too sharp . - The driver's hands are not on the steering
wheel.
(D Tips
Make sure the camera's field of view
¢
fig. 108 is not obstructed by stickers,
deposits or anything else. For information
on cleaning, refer to
¢ page 214 .
Active lane assist display in the
instrument cluster
Applies to vehicles: wit h active lane assist
Fig. 109 D isp lay : Act iv e lane ass ist is swi tc h ed on a nd
is wa rnin g
Fig. 110 Instrumen t cl uster: Active lane as sis t is
s witch ed o n but not re ad y to provid e wa rnin gs
You can call up the active lane assist display
using the buttons in the multifunction steer­
ing wheel ¢
pag e 23.
When active lane assist is switched on, the
system indicates which lines are detected by
displaying solid lines on the left and/or right
side of your vehicle :
ll>

104 Audi side assist
Audi side assist
Lane Change Assistant
Description
App lies to vehicles: wit h side ass ist
Fig . 111 Sensor detection range
Fig. 112 Disp lay on the exterio r mirror
Side assist he lps you monitor your blind spot
and traffic behind your veh icle. Within the
limits of the system, it warns you about
vehicles that are coming closer or that are
traveling with you within sensor range
(D
c:> fig . 111: if a lane change is class ified as crit­
ical, the display @ in the exterior mirror
c:>fig. 112 turns on.
The display in the left exterior mirror provides
assistance when mak ing a lane change to the
le ft, while the display in the right exter ior mir­
ror provides assistance when making a lane
cha nge to the right.
Information stage
As long as you do not activate the turn signal,
side assist
informs you about vehicles that are
detected and class ified as critical. The display
in the respective mirror turns on, but is d im. T
he display remains dim intentionally in the
information stage so that your view toward
the front is not disturbed .
Warning stage
If you activate the turn signal, s ide ass ist
warns you about vehicles that are detected
and classified as critical. The display in the re­
spective mirror blinks brightly . If this hap­
pens, check traffic by glancing in the rearview
mirror and over your shoulder
c:> .&. in General
information on page 105.
Applies to vehicles with active lane assist*:
The display in each mirror can a lso blink if you
have not activated the turn signal: If you are
approaching a detected lane marker line and
it appears you will leave the lane, side assist
will warn you about detected vehicles that are classified as critical.
(0 Tips
- You can adjust the brightness of the dis­
play @
c::> page 106.
-Please refer to the instructions for tow­
ing a trailer located in
~ page 105.

124 Parking systems
Parallel parking
Applies to vehicles: with park ing system p lus with rear
view camera
This view may be used when parallel parking
along the side of a street.
F ig. 136 Infot ainmen t: blue surface aligned in the
park ing space
Fig. 137 Infotainment : contact of t he blue curved line
wit h the curb
Parking on the right is described here. It is
identica l when parking on the left.
If there is an obstacle next to the parkin g
space (such as a wall), refer to information for
"Parking next to obstacles"
C) page 124.
"Activate the turn signal.
"Posit ion your vehicle next to a parked vehi­
cle in front of the desired parking space. The
distance to this vehicle should be approxi­
mately 3 ft (1 m).
" Turn the Infotainment on and shift into re­
verse gear. The parking system is turned on
and the
cross parking indicator is displayed.
" Press the control button on the Infotain­
ment unit
(D <=> fig . 136 . The parallel park­
ing
indicator is displayed.
"Back up and align yo ur vehicle so the blue
area @ borders on the rear end of the vehi­
cle behind you or on the parking space line
¢ A in General information on page 122,
i:::>(D in General information on page 122.
The blue area represents an extension of the
veh icle's outline by approximate ly 16 ft
(5 m) to the rear. The long side of the blue
area should be on the curb. The entire blue
area must fit into the parking space.
"Wi th the vehicle stopped, turn the steering
wheel to the right as fa r as it will go.
" Back i nto the parking space until the blue
curve
¢ fig. 137touches the curb¢ A in
General information on page 122,
C)(D in
General information on page 122.
Stop the
veh icle .
" With the vehicle stopped, turn the steering
wheel to the left as far as it will go.
" Continue to back into the parking space un­
til the vehicle is parked parallel to the curb
i:::> A in General information on page 122,
i:::>(D in General information on page 122.
@ marks the rear bumper. Stop the vehicle,
at the latest, when the red orientat ion line
@ borders an object . Keep an eye on the
front of your vehicle while doing this.
Parking next to obstacles
If there is an obstacle (such as a wa ll) next to
the parking space, position the vehicle so
there is mo re space on that side. Position the
long side of the blue surface so that there is
sufficient space from the obstacle. The sur ­
face must not be touching. You will also need
to start turning the steering wheel much ear­
lier . The b lue curve
¢ fig. 13 7 must not touch
the obstacle and should have suffic ient room.
@ Tips
The left or right orientation lines and sur­
faces will be displayed, depending on the
turn s ignal being used.
Peripheral cameras
. Introduction
Appl ies to vehicles: with top view came ra system
In addition to the functions from the sensors
<=> page 121, Sensors, C) page 123, Visual dis­
play,
this parking system contains per iphera l 11>-

Homelink
Universal remote
control
General information
Applies to vehicles: with Home link unive rsal remote con­
tro l
The Homelink universal remote control can
be programmed with hand -held transmitters
from existing equipment
Using the Homelink universal remote control,
you can operate equ ipment such as garage
doors, property gates and house lights from inside your vehicle .
Using the Homelink universal remote control,
you can replace up to three separate hand ­
held transmitters for equipment on your
property with just one universal remote con­
trol. Most of these transmitters a re used to
operate ga rage doors and property gates. The
individual transmitters are programmed at
the front bumper. That is where the control
module is located.
The transmitters must be programmed first in
order to operate systems using the Homelink
universal remote control.
A WARNING , .,.
- Never use the Homelink transmitter
with any garage door opener that does
have not the safety stop and reverse fea­
ture as required by federal safety stand­
ards . Th is includes any garage door open ­
er model manufactured before April 1,
1982.
- A garage door opener which cannot de­
tect an object, signaling the door to stop
and reverse does not meet current feder­
al safety standards . Us ing a garage door
opener without these features increases
risk of serious injury or death.
- For safety reasons never release the
parking brake or start the engine while
anyone is standing in front of the vehicle .
- A garage door or an estate gate may sometimes be set in motion when the
H ome link 131
Homelink remote control is being pro­
grammed. If the device is repeatedly ac­
tivated, this can overstrain motor and
damage its electrical components -an
overheated motor is a fire hazard!
- To avoid possible injuries or property
damage, please always make absolutely
certa in that no persons or objects are lo­
cated in the range of motion of any
equipment being ope rated.
(D Tips
- If you would like additional information
on the Home link Universal Transce iver
'
Homelink compatib le products, or to
purchase other accessories such as the
Homelink Lighting Package, please con­
tact Homelink at 1-800-355-3515 or on
the Internet at www.homelink.com.
- For Declaration of Comp liance to United
States FCC and Ind ustry Canada reg ula­
tions
~ page 293.
Operation
Applies to vehicles: with Homeli nk
Fig. 151 Contro l u ni t in the head liner
"' 8 ±
" m
Requ irement: The buttons must be program­
med
~ page 132.
"Press the programmed button~ & in Gen­
eral information on page 131
to open the
garage door. The light @will bl ink or turn
on .
" Press the button again to close the garage
door
¢ .&. in General information on
pag e 131 . .,.

264 Tires and wheels
remain continuously illuminated. This se­
quence will continue upon subsequent vehicle
start-ups as long as the malfunction exists.
When the malfunction indicator is illuminat­
ed, the system may not be able to detect or
signal low tire pressure as intended . TPMS
malfunctions may occur for a variety of rea­
sons , including the installation of replace­
ment or alternate tires or wheels on the vehi­
cle that prevent the TPMS from functioning
properly . Always check the TPMS malfunction
tellta le after replacing one or more tires or
wheels on your veh icle to ensure that the re­
placement or alternate tires and wheels allow
the TPMS to continue to function properly.
Tire pressure indicator appears
The tire pressure indicator in the instrument
cluster informs you if the tire pressure is too
low or if there is a system malfunction.
Fig. 213 Display : underi nflatio n warning
Fig. 214 Display: System mal functio n
Using the ABS sensors , the tire pressure moni­
toring system compares the tire tread circum­
ference and vibration characteristics of the in­
dividual tires . If the pressure decreases in one
or more tires, th is is indicated in the i nstru- ment
cluster with a warning symbol
[I] and a
message
r=> fig. 213 .
The tire pressure monitoring system must be
reset via MMI each time the pressures are ad­
justed (e.g. when switching between partial
and full load pressure) or after changing or re­
plac ing a tire on your vehicle
r=> page 265. The
TPMS indicator only monitors the tire pres­
sure that you have previously stored. You can
find the recommended tire pressures for your
vehicle on the Label on dr iver's side B-pillar
r=> page 249.
Tire tread circumference and vibration charac­
teristics can change and cause a tire pressure
warning if:
- the tire pressure in one or more tires is too
low,
- the tire has structural damage,
- the tire pressure was changed, wheels rotat -
ed or replaced but the TPMS was not reset
¢ page 265,
-the spare tire* is mounted.
Warning symbols
[I] Loss of pressure in at least one tire¢&,. .
Check the tire or tires and replace or repa ir if
necessary . The indicator light
[I] in the instru­
ment cluster also illuminates
¢page 11.
Check/correct the pressures of all four tires
and reset TPMS via MMI.
Ill (T ire Pressure Monitoring System) Tire
pressure! System malfunction.
Iflll appears
after switching the ignition on or while driving
¢fig . 214 and the indicator light [I] in the in­
strument cluster blinks for approximately one minute and then stays on, there is a system
malfunction . Attempt to store the correct tire
pressure ¢
page 265. If the indicator light
does not turn off or if it turns on shortly
thereafter , immediately drive your vehicle to
an a utho rized Aud i dealer or authorized repair
facility to have the malfunction corrected.
llll-

,....,
N ,....,
N
0 J:
'SI: ,...., \!) 1.1"1 ,...., 1.1"1 ,....,
Ins ta lli ng the uppe r tether strap on the
a nchorage ... ..... ..... ... .. .. .. ...
192
Inst ruments
Adj usting the lighting ..... .. .. .. .. ..
5 1
Instruments and controls
General i llustration ........... ... .... 8
Instrument cluster ............. .... .
10
Interior lighting
Ambience lighting . . . . . . . . . . . . . . . . . .
50
Front and rear ........... .... .. .... 50
Intermittent (windshield wipe rs) . . . . . . . 53
l
Ja ck .... .. .. .. ............... .. .. . 267
Jump -starting ................ .. .... 281
Ju mpe r cables . ..... .... ... .. .. .. .. . 282
K
Key ... .. .. .. .. ... .. ..... ... .. .. .... 3 1
Battery rep lacement master key ... .. .. 32
Emergency key . . . . . . . . . . . . . . . . . . . . . 3 1
Key not recognized . . . . . . . . . . . . . . . . . . 85
K ey replacement . . . . . . . . . . . . . . . . . . . 31
Master key . . . . . . . . . . . . . . . . . . . . . . . .
31
Mechanical key .............. .... ... 32
Valet key . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1
Kick-down (a utomat ic transm ission) . . . . 117
Knee airbags . .... ......... .... .. .. . 166
D escr ipt ion ... .. .. .. .... ... .. .... . 166
How t hey work . ... .... ... .. .. .. .. . 167
Important safety instructions ... .. .. . 168
L
Lane assist 101
L ane Change Ass istant
refer to S ide ass ist ..... .... ... ... .. 104
LATCH .... .. .. ............. .. .. ...
187
Descr ipt ion . ............. .... .. ... 188
Guidance fixtures for lower anchorages 189
Install ing a child restraint ....... .... 190
Locat io n . .. .. ........ ... .. ... ... . 188
M ounting and releasing the ancho rage
h ook .... .. ................. .. ...
190
Leather cleaning/protection ........ .. 217
Leaving home . ... ...... ... .. .. .. .... 48
Inde x 301
Lifting jack . . . . . . . . . . . . . . . . . . . 2 72, 2 73
Lifting vehicle ...... ................ 285
Light
Amb ience lig hting ............. .... .
50
Coming/Leav ing home . .. .... ... .. .. . 48
Daytime runn ing lights .. ...... .... .. 46
Emergency flashe rs ............... .. 47
E xte rior lig hti ng .. .... ........... .. . 46
Head ligh t ra nge control ............ . 46
Hig h beam .. .. .. .. . ............... 48
Hig h beam assist ... . .. .. ..... ... .. . 49
low beam ....... .. . .. .. ..... ... .. . 46
Rear fog lights ...... .. .. ..... ... .. . 46
S ide mar ker lights ............. .. .. . 46
Turn signals . .. .. ................. . 48
Light/ rain senso r
Head lights . ....... . .. .. ..... ... .. . 46
Intermittent (windshie ld w ipers) ... .. .
53
Sensor defective . . . . . . . . . . . . . . . . . . . . 22
Loading the roof rack ............ .. .. . 73
Locking
luggage compartment lid . .. ... ... .. .
37
Power loc king switch ... ..... ... .... . 36
Remote con tro l ... ................. 35
U sing the key .. .. .... ........... .. . 36
Low beams ........ ...... ........... 46
Lowe r universal anchorages (Canada)
187
Luggage compartment
L uggage compartment ne t . . . . . . . . . . .
70
Pass- through w ith sk i sack ........ .. . 71
Stow ing luggage ... . ... ...... ... .. 139
Tie-downs . . . . . . . . . . . . . . . . . . . . . . . . . 70
Luggage compartment lid
A ut omat ic operation . . . . . . . . . . . . . . . .
38
Emergency re le a se ............. .. .. . 40
Movement -act ivated open ing . ... .. .. . 40
Opening and closing . .. ..... ... .. .. .
37
Lumbar support
Fron t seats . . . . . . . . . . . . . . . . . . . . . . . . 6 0
Re ar seats . .. .. .. .... ........... .. .
61
M
Maintenan ce .. .. ...... ........... .. 2 90
Malfunction Ind icator Lamp (MIL) . . 20, 29
•
•