(D Note
When removing or installing the wheel,
the rim could hit the bra ke rotor and dam
age the rotor . W ork carefully and have a
second person help you.
N ever use the hexa gonal s ocket in the ha n
d le of the screwdriver to loosen or t ighten
the wheel bolts .
- Pull the reversib le blade from the screw
drive r before yo u use the hexagonal
socket in t he handle to t urn the whee l
bo lts .
- When mounting tires with
unid irectional
tread design
make s ure the tread pat
te rn is poi nte d the r ight way
c:> pag e253 .
- The w heel bolts should be clea n and easy
to tu rn . Ch eck for dirt and corros ion on
the mat ing su rfaces of both the whee l
a nd th e hu b. Remove a ll dir t fro m these
s ur fa ces before remo unting the wheel.
Tires with unidirectional tread design
Tires with unidirectional tread design must be
mounted with their tread pattern poin ted in
t he right direction.
Using a spare tire with a tread pattern
intended for use in a specific direction
When using a sp are tire w ith a tr ead p atte rn
i ntended fo r u se in a specific direc tion, p lease
note t he following:
- T he di rection of rotation is ma rked by an a r
r ow on the side o f the tire.
- If th e spare t i re has to be installed in the in
c orrec t direction, use the spa re tire only
tem por ari ly si nce the t ire will no t be able to
ac hieve its op timum perfo rmance character
ist ics with rega rd to aquaplani ng, noise and
wea r.
- We recommend that you pay particular at
tent io n to this fact du ring wet weat he r and
that you adjust your speed to matc h road
condit ions .
What do I do now? 253
-Replace the flat t ire with a new one and
have it installed on your vehicle as soon as
possible to restore the han dling advantages
of a un idirectional tire.
Notes on wheel changing
Please read the i nfo rmation c:> page 236, New
tires and replacing tires and wh eels
if you a re
go ing to use a spare tire wh ich is different
from the ti res on you r vehicle.
After you cha nge a tire :
-Check the tire pressure on the spare imme
diately after installation .
- Have the wheel bolt tightening torque
checked with a torque wrench as soon as
possible by your authorized Audi dealer o r
a qualified service station.
- With steel and alloy wheel r ims, the wheel
bolts are correctly tightened at a torque of
90 ft lb (120 Nm ).
- If you notice that the wheel bolts are cor
roded and diff icult to turn while changing
a tire, they should be replaced before you
check the tightening torque.
- Replace the flat tire w ith a new one and
have it installed on your vehicle as soon as
possible. Remount the whee l cover.
Until then , dr ive with e xtra care and at re
duced speeds.
A WARNING
-
- I f you are going to e quip your ve hicle
wit h tires o r rims which differ from those
which were fac to ry inst alled, t hen be
s ure to read t he informa tion
c:> p age 2 36,
New tire s and repla cing tires a nd
wheels .
-Always make s ure th e d am age d wheel o r
eve n a fla t tire an d the jack an d too l ki t
are p rope rly secu red in the luggage com
pa rtment an d are not loose in the pas
senger compartment .
- In an accident or sudden maneuver they
co uld f ly forwa rd, inj uring a nyone in the
veh icle.
•
•
•
