2015 Acura RDX hood release

Visual Index
6
Quick Reference Guide
❙Power Door Lock Master Switch (P 105)
❙Power Window Switches (P 115)
❙Rearview Mirror (P 133)
❙Parking Brake (P 257)
❙Hood Release Handle (P 276)
❙Shift Lever Automatic
Transmission
(P 243)
❙Driver's Front Airbag (P 40)
❙Door Mirror Controls (P 134)
❙Passenger's Front Airbag
(P 40)
❙Fuel Fill Door Release Handle (P 264)
❙Glove Box (P 145)
❙Accessory Power Socket
(P 148)
❙Seat Heater Switches (P 151)
❙Interior Fuse Box (P 340)

Visual Index
8
Quick Reference Guide
❙Windshield Wipers (P 126, 297)
❙Door Lock/Unlock Control (P 99)
❙How to Refuel (P 264)
❙High-Mount Brake Light (P 296)
❙Opening/Closing the Tailgate
(P 107)
❙Rear Wiper (P 127, 299)
❙Back-Up Lights (P 294)
❙Brake/Taillights (P 292)
❙Rear Turn Signal Lights (P 292)
❙Rear Side Marker Lights (P 292)
❙Power Door Mirrors (P 134)
❙Maintenance Under the Hood (P 275)
❙Fog Lights* (P 125, 289)
❙Multi-View Rear Camera (P 262)
❙Front Turn Signal/Parking Lights (P 122, 291)
❙Side Marker Lights (P 122, 291)
❙Tires (P 301, 321)
❙Headlights (P 122, 287)
❙Tailgate Release Button (P 108)

18
Quick Reference Guide
Maintenance (P 267)
Under the Hood (P 275)
● Check engine oil, engine coolant, and windshield washer
fluid. Add when necessary.
● Check brake fluid.
● Check the battery condition monthly.
aPull the hood release handle under the corner of the
dashboard.
bLocate the hood latch lever, pull the lever up, and lift up
the hood.
cWhen finished, close the hood and make sure it is firmly
locked in place.
Lights (P 287)
● Inspect all lights regularly.
Wiper Blades (P 297)
● Replace blades if they leave streaks
across the windshield.
Tires (P 301)
● Inspect tires and wheels regularly.
● Check tire pressures regularly.
● Install snow tires for winter
driving.

uuAdjusting the Seats uAdjusting the Seat Positions
138
Controls
Your vehicle is equipped with head restraints
in all seating positions.
Head restraints are most effective for
protection against whiplash and other rear-
impact crash injuries when the center of the
back of the occupant's head rests against the
center of the restraint. The tops of the
occupant's ears should be level with the
center height of the restraint.
■Adjusting the front and rear ou ter head restraint positions
To raise the head restraint: Pull it upward.
To lower the head restraint: Push it down
while pressing the release button.
■Adjusting the Head Restraints1 Adjusting the Head Restraints
For the head restraint system to work properly:
•Do not hang any items on the head restraints, or
from the restraint legs.
•Do not place any object be tween an occupant and
the seat-back.
•Install each restraint in its proper location.
3WARNING
Improperly positioning head restraints
reduces their effectiveness and increases
the likelihood of serious injury in a crash.
Make sure head restraints are in place and
positioned properly before driving.
Position head in the center
of the head restraint.

276
uuMaintenance Under the Hood uOpening the Hood
Maintenance
Opening the Hood
1. Park the vehicle on a level surface, and set
the parking brake.
2. Pull the hood release handle under the
lower left corner of the dashboard.
u The hood will pop up slightly.
3. Push up the hood latch lever in the center
of the hood to release the lock mechanism,
and open the hood.
4. Remove the support rod from the clamp
using the grip. Mount the support rod in
the hood.
When closing, remove the support rod, and
stow it in the clamp, then gently lower the
hood. Remove your hand at a height of
approximately 12 inches (30 cm) and let the
hood close.1 Opening the Hood
NOTICE
Do not open the hood when the wiper arms are
raised.
The hood will strike the wipers, and may damage
either the hood or the wipers.
When closing the hood, check that the hood is
securely latched.
If the hood latch lever moves stiffly, or if you can
open the hood without lifti ng the lever, the latch
mechanism should be cl eaned and lubricated.
Hood Release Handle
Pull
Lever
Support RodGrip
Clamp