2015 Acura MDX hood release

Visual Index
6Quick Reference Guide
❙Power Window Switches
(P138)
❙Hood Release Handle
(P400)
❙Driver’s Side Interior Fuse Box
(P476)
❙Driver’s Knee Airbag
(P46)
❙Door Mirror Controls
(P159)
❙Power Door Lock Master Switch
(P126)
❙Memory Buttons
(P156)
❙SET Button
(P156)
❙Passenger’s Front Airbag
(P42)
❙Shift Lever
Automatic Transmission
(P331)
❙USB Port
(P201)
❙Rearview Mirror
(P158)
❙IDS Button
(P335)
❙Driver’s Front Airbag
(P42)
❙Parking Brake
(P371)
❙Auxiliary Input Jack
(P202)
❙Accessory Power Socket
(P178)
❙Accessory Power Socket
(P178)
❙Passenger’s Side Interior Fuse
Box
(P477)
❙Glove Box
(P174)
❙Power Tailgate Button (P132)❙Fuel Fill Door Release Button (P388)

19Quick Reference Guide
Maintenance
(P391 )
Under the Hood
(P399)
● Check engine oil, engine coolant, and windshield washer
fluid. Add when necessary.
● Check brake fluid.
● Check the battery condition monthly.
a
Pull the hood release handle under the corner of the
dashboard.
b
Locate the hood latch lever, pull the lever up, and lift up
the hood.
c
When finished, close the hood and make sure it is firmly
locked in place.
Lights
(P411)
● Inspect all lights regularly.
Wiper Blades
(P417)
● Replace blades if they leave streaks
across the windshield.
Tires
(P421)
● Inspect tires and wheels regularly.
● Check tire pressures regularly.
● Install snow tires for winter
driving.

uuAdjusting the Seats uAdjusting the Seat Positions
164Controls
Your vehicle is equipped with head restraints
in all seating positions.
Head restraints are most effective for
protection against whiplash and other rear-
impact crash injuries when the center of the
back of the occupant’s head rests against the
center of the restraint. The tops of the
occupant’s ears should be level with the
center height of the restraint.
■Adjusting the front and second row outer head restraint positions
To raise the head restraint: Pull it upward.
To lower the head restraint: Push it down
while pressing the release button.■
Adjusting the Head Restraints
1 Adjusting the Head Restraints
In order for the head restraint system to work
properly:•Do not hang any items on the head restraints, or
from the restraint legs.•Do not place any objects between an occupant and
the seat-back.•Install each restraint in its proper location.
3
WARNING
Improperly positioning head restraints
reduces their effectiveness and increases
the likelihood of serious injury in a crash.
Make sure head restraints are in place and
positioned properly before driving.
Position head in the center
of the head restraint.

400
uuMaintenance Under the Hood uOpening the Hood
Maintenance
Opening the Hood
1. Park the vehicle on a level surface, and set
the parking brake.
2. Pull the hood release handle under the
lower left corner of the dashboard.
u The hood will pop up slightly.
3. Push up the hood latch lever in the center
of the hood to release the lock mechanism,
and open the hood.
4. Lift the hood up most of the way.
u The hydraulic supports will lift it up the
rest of the way and hold it up.
When closing, lower it to approximately 12
inches (30 cm), then press down firmly with
your hands.
1 Opening the HoodNOTICEDo not open the hood when the wiper arms are
raised.
The hood will strike the wipers, and may damage
either the hood or the wipers.
When closing the hood, check that the hood is
securely latched.
If the hood latch lever moves stiffly, or if you can
open the hood without lifting the lever, the latch
mechanism should be cleaned and lubricated.
Hood Release Handle
Pull
Lever