2015.5 VAUXHALL VIVARO clock

Vehicle care149
4.Push to install the bulb holder into
the lamp assembly, then rotate
clockwise to secure.
5. Install lamp assembly with the 2 screws.
Number plate light
1. Prise out lamp using a flat blade screwdriver.
2. Prise off lens.
3. Renew bulb.
4. Install lens and replace lamp in housing.
Fog tail light
1. Remove the 2 screws (using thetool supplied) and remove lamp
assembly.
2. Rotate bulb housing anticlockwise
to separate from lamp assembly.
3. Renew upper bulb.
4. Push to install the bulb holder into
the lamp assembly, then rotate
clockwise to secure.
5. Install lamp assembly with the 2 screws.
Interior lights
Front and rear courtesy lights
1. Remove lens assembly using a flat blade screwdriver.
2. Renew bulb.
3. Install lens assembly.

164Vehicle care
Replace the used sealant bottle.Dispose of the sealant bottle as
prescribed by applicable laws.
Wheel changing
Some vehicles are equipped with a
tyre repair kit instead of a spare wheel 3 161.
Make the following preparations and
observe the following information:
■ Park the vehicle on a level, firm and
non-slippery surface. The front wheels must be in the straight-
ahead position.
■ Apply the parking brake and engage first gear or reverse gear.
■ Remove the spare wheel 3 165.
■ Never change more than one wheel
at a time.
■ Use the jack only to change wheels
in case of puncture, not for a
seasonal winter or summer tyre
change.
■ If the ground on which the vehicle is standing is soft, a solid board
(max. 1 cm thick) should be placed
under the jack.■ Take heavy objects out of the vehicle before jacking up.
■ No people or animals may be in the
vehicle when it is jacked-up.
■ Never crawl under a jacked-up vehicle.
■ Do not start the engine when the vehicle is raised on the jack.
1. Remove the wheel cover (using the hook supplied). Vehicle tools
3 155.
2. Loosen each of the wheel bolts by
half a turn using the wheel
wrench. Ensure the wrench
locates securely. The wrench
should turn anticlockwise to
loosen the bolts. Invert the wrench if necessary.
3. Place lifting pad spigot of the jack
under the jacking hole located
nearest the wheel concerned.
Ensure the jack is positioned
correctly. The jack base must be
on the ground directly below the
jacking hole in a manner that
prevents it from slipping.
4. Install wrench onto the jack and raise the vehicle by turning the
wrench until the wheel is clear of
the ground.

Vehicle care165
5. Unscrew wheel bolts completelyby turning anticlockwise and wipe
clean with a cloth.
Put wheel bolts somewhere
where the threads will not be
soiled.
6. Change the wheel. Spare wheel 3 165.
7. Screw in the wheel bolts.
8. Lower the vehicle and remove jack.
9. Tighten each of the wheel bolts in
a crosswise sequence using the
wheel wrench. Ensure the wrench locates securely. The wrench
should turn clockwise to tighten
the bolts. Invert the wrench if
necessary.
Tightening torque is 160 Nm.
10. Replace the wheel cover, ensuring that the valve hole in thewheel cover is aligned with the
tyre valve before installing.Notice
If applicable, fit anti-theft bolts
nearest the tyre valve (otherwise it
may not be possible to refit the wheel
cover).
11. Stow the replaced wheel 3 165
and the vehicle tools 3 155.
12. Have the new wheel balanced on the vehicle.
Check the tyre pressure of the
installed tyre 3 190.
Check the wheel bolt torque.
Have the defective tyre renewed or
repaired as soon as possible.
Spare wheel
Some vehicles are equipped with a
tyre repair kit instead of a spare wheel 3 161.
If mounting a spare wheel which is
different from the other wheels, this
wheel might be classified as a
temporary spare wheel and the
corresponding speed limits apply,even though no label indicates this.
Seek the assistance of a workshop to
check the applicable speed limit.Caution
The use of a spare wheel that is smaller than the other wheels or in combination with winter tyres
could affect driveability. Have the defective tyre replaced as soon as
possible.
It may be necessary to jack the
vehicle up to gain access to the spare
wheel on a fully loaded vehicle with a flat rear tyre.
Wheel changing 3 164.

168Vehicle care
Lead connection order:1. Connect the red lead to the positive terminal (1) of the booster
battery.
2. Connect the other end of the red lead to the positive terminal (2) of
the discharged battery.
3. Connect the black lead to the negative terminal (3) of the
booster battery.
4. Connect the other end of the black
lead to a vehicle grounding point
(4), such as the engine block or an
engine mounting bolt. Connect as
far away from the discharged
vehicle battery as possible,
however at least 60 cm.
Route the leads so that they cannot
catch on rotating parts in the engine
compartment.
To start the engine: 1. Start the engine of the vehicle providing the jump start.
2. After 5 minutes, start the other engine. Start attempts should be
made for no longer than
15 seconds at an interval of
1 minute.
3. Allow both engines to idle for approx. 3 minutes with the leads
connected.
4. Switch on electrical consumers (e.g. headlights, heated rear
window) of the vehicle receiving
the jump start.
5. Reverse above sequence exactly when removing leads.Towing
Towing the vehicle The towing eye is stowed with thevehicle tools 3 155.
Release cap using a suitable tool.
Screw the towing eye clockwise into
the front towing point and tighten fully
using the wheel wrench.
Attach a tow rope - or better still a tow rod - to the towing eye, never to the
bumper or front suspension units.

195
Child restraint installationlocations ................................... 59
Child restraints.............................. 58
Child restraint systems ................58
Cigarette lighter ........................... 77
Cleaning the vehicle ...................170
Climate control ............................. 15
Climate control systems ...............99
Clock ............................................ 76
Coat hooks ................................... 66
Control indicators.......................... 81
Control of the vehicle .................111
Controls ........................................ 73
Controls in steering wheel ............73
Convex shape .............................. 36
Coolant ....................................... 140
Coolant and antifreeze ...............174
Coolant heater ............................ 104
Cooling (AC) ............................... 100
Cornering light .............................. 95
Cruise control ...................... 87, 124
Cupholders .................................. 66
Curtain airbag system .................. 56
D Danger, Warnings and Cautions ...3
Dashboard .................................... 10
Daytime running lights ............93, 95
Declaration of conformity ............191
Demisting and defrosting ..............15Diesel fuel filter .......................... 144
Diesel fuel system bleeding .......144
Diesel particle filter ....................118
Door locks..................................... 23
Door open .................................... 88
Doors ............................................ 29
Double cab ................................... 67
DPF (diesel particle filter) ...........118
Driver assistance systems ..........124
Driver Information Centre .............88
Driving characteristics and towing tips .............................. 134
Driving economically................... 110
Driving hints ................................ 110
E ECO mode .................................. 110
ecoScoring.................................... 90
Electric adjustment ......................36
Electrical system......................... 150
Electronic climate control system 101
Electronic key system ...................21
Electronic Stability Program .....
.................................. 85, 123, 135
Electronic Stability Program off ...86
End-of-life vehicle recovery .......137
Engine air filter............................ 140
Engine air flow indicator .............140
Engine coolant ........................... 140
Engine coolant temperature ........86Engine data ............................... 180
Engine exhaust .......................... 118
Engine identification ...................177
Engine oil ................... 138, 174, 179
Engine oil additives ....................174
Engine oil level ............................ 90
Engine oil pressure ......................86
Engine oil viscosity grades .........174
Enhanced Traction function 122, 123
Entry lighting ................................ 98
Event data recorders ..................191
Exhaust gases ....................118, 168
Exit lighting .................................. 98
Exterior care .............................. 170
Exterior light ................................. 87
Exterior lighting ......................12, 93
Exterior mirrors ............................. 36
F
Fault messages ............................ 89
First aid kit ................................... 70
Fixed air vents ........................... 108
Fog light ....................................... 87
Fog lights .............................. 96, 146
Fog tail light ............................... 149
Folding centre seatback ...............66
Folding front centre passenger seat ........................................... 44
Folding mirrors ............................. 36
Front airbag system .....................55