Introduction27
VEHICLE INFORMATION (NAVI 80)
To access the Vehicle menu from the Home page, press MENU followed by
Vehicle on the display screen.
Depending on vehicle, the following menus are displayed:
■ Driving Eco 2
■ Care
■ On-board computer
■ SettingsDriving Eco 2
The following features are available: ■ Trip report
Displays the following data from the last journey:
Average fuel consumption,
average speed, total fuel
consumption, recovered energy or mileage completed, average
environmental driving
performance, braking anticipation,
ability to manage vehicle speed.
To save journey data: Press 'Save' then select the journey type from
the following list:Home/work, holiday, weekend, trip,
personal.
To reset journey data: Press
'Reset'. Confirm or cancel with 'Yes' or 'No'.
■ My preferred trips
Displays changes in your driving
style (when journey data has been saved).
The 'Summary' tab displays the
following: Total route distance,
distance covered, date of
information update, average rating
out of 100.
The 'Details' tab displays journey
record information.
■ Eco coaching
Displays advice for reducing fuel consumption
Scroll through the pages and
familiarise yourself with the advice.Care
The following features are available:
■ Ioniser : Select 'Clean' mode to help
reduce bacteria and allergens in
the air, or select 'Relax' mode toimprove the driving environment
through the emission of ions.
Operation stops automatically after
30 minutes.
Switch off if not required.
To activate automatic operation, press 'Start ioniser at each vehicle
start' (tick box checked).
■ Scent diffuser : Change fragrance
type and diffusion intensity in the
passenger compartment.
■ Outside air quality : Displays a chart
of exterior air quality over a period
of time, rated from ô 'Good' to
õ 'Polluted ]' (low level) to
ö 'Polluted <' (high level).
Press Done to confirm changes.On-board computer
Displays the following information since the last reset:
■ Start date of calculation
■ Total distance
■ Average speed
■ Average fuel consumption ■ Total fuel or energy consumption
Phone127
■c : Missed calls.
■ a: Dialled numbers.
The most recent calls are displayed at
the top. Alternatively, press 4 or 1 to
move up/down in the display.
Select the desired contact from the
chosen call list to start the dialling
process.
Notice
If necessary, press < (to open a
pop-up menu) and select Update
telephone data to update the call
lists.
Voicemail box
R15 BT USB, R16 BT USB,
CD16 BT USB, CD18 BT USB,
CD35 BT USB - Voicemail box
To listen to mobile phone voicemail
messages via the Infotainment
system while the phone is connected, select the Voicemail box menu.
NAVI 80 - Voicemail box
To listen to mobile phone voicemail
messages via the Infotainment
system while the phone is connected,from the Home page, press MENU
then Phone followed by Voice mail on
the display screen.
The configuration screen will be
displayed if the voicemail box is not configured. Enter number on the
numerical keyboard and confirm.
Receiving calls R15 BT USB, R16 BT USB,
CD16 BT USB, CD18 BT USB -
Receiving calls
To accept the call, depending on
vehicle configuration:
■ Briefly press the 7 button (on the
steering column controls)
■ Select the 7 icon in the display (by
turning and pressing the OK rotary
knob)
To reject the call, depending on
vehicle configuration:
■ Press and hold the 8 button (on the
steering column controls)
■ Select the } icon in the display (by
turning and pressing the OK rotary
knob)When receiving a call, the caller
number may be shown on the
Infotainment system display screen. If
the number is stored in the system
memory, the name is displayed
instead. If the number cannot be
displayed, the message Private
number is shown.
CD35 BT USB - Receiving calls
To accept the call, briefly press the
7 button (on the steering column
controls).
To reject the call: ■ Press and hold the 8 button (on the
steering column controls), or
■ Select Refuse in the display (by
turning and pressing the central rotary knob)
When receiving a call, the caller
number may be shown on the
Infotainment system display screen. If the number is stored in the system
memory, the name is displayed
instead. If the number cannot be
displayed, the message Unknown is
shown.
