Introduction27
VEHICLE INFORMATION (NAVI 80)
To access the Vehicle menu from the Home page, press MENU followed by
Vehicle on the display screen.
Depending on vehicle, the following menus are displayed:
■ Driving Eco 2
■ Care
■ On-board computer
■ SettingsDriving Eco 2
The following features are available: ■ Trip report
Displays the following data from the last journey:
Average fuel consumption,
average speed, total fuel
consumption, recovered energy or mileage completed, average
environmental driving
performance, braking anticipation,
ability to manage vehicle speed.
To save journey data: Press 'Save' then select the journey type from
the following list:Home/work, holiday, weekend, trip,
personal.
To reset journey data: Press
'Reset'. Confirm or cancel with 'Yes' or 'No'.
■ My preferred trips
Displays changes in your driving
style (when journey data has been saved).
The 'Summary' tab displays the
following: Total route distance,
distance covered, date of
information update, average rating
out of 100.
The 'Details' tab displays journey
record information.
■ Eco coaching
Displays advice for reducing fuel consumption
Scroll through the pages and
familiarise yourself with the advice.Care
The following features are available:
■ Ioniser : Select 'Clean' mode to help
reduce bacteria and allergens in
the air, or select 'Relax' mode toimprove the driving environment
through the emission of ions.
Operation stops automatically after
30 minutes.
Switch off if not required.
To activate automatic operation, press 'Start ioniser at each vehicle
start' (tick box checked).
■ Scent diffuser : Change fragrance
type and diffusion intensity in the
passenger compartment.
■ Outside air quality : Displays a chart
of exterior air quality over a period
of time, rated from ô 'Good' to
õ 'Polluted ]' (low level) to
ö 'Polluted <' (high level).
Press Done to confirm changes.On-board computer
Displays the following information since the last reset:
■ Start date of calculation
■ Total distance
■ Average speed
■ Average fuel consumption ■ Total fuel or energy consumption
Navigation89
Specific content or all map content
can be updated. Select one of the
options first or press Options then
Update . Wait for the update to
complete.
Refer to (NAVI 50) "USB memory
stick", "Updating the USB memory
stick and Navigation system" in the
"General information" section 3 69.
NAVI 80 - Setting up the navigation
system
To access the Navigation settings
menu from the Home page, press
MENU then Navigation , followed by
Settings on the display screen. The
following settings submenus are
displayed:
■ Turn off voice guidance :
Switch on/off voice guidance during navigation.
■ Route planning :
Select a planning preference type;
"Fastest route" is recommended.
The eco-route is designed to save
the most fuel.
Then switch on/off " iQ routes™" as
required. iQ routes™ enablesroutes to be calculated according to
average traffic levels during a
particular day and time, and also
the best route according to actual
traffic speeds.
■ Show POI on map :
Show or hide categories of POI
markers on the map.
■ Manage POIs :
Add, change or delete POIs or POI
categories.
■ Voice :
Select synthesised voice or a male
or female human voice (for the voice instructions) from the
available list.
Human voices provide more
simplified voice guidance
instructions and are not available
when using the Voice recognition
function 3 110.
■ EV settings :
Not used.
■ Set home location :
Change the home or most used
destination address.■ Manage saved locations :
Delete or rename saved destination
addresses.
To rename, select an address from the displayed list, press Rename
then enter a new name. Press
Done to confirm. To delete a
selected address, press Delete and
confirm when prompted.
■ Switch map :
If more than one map is installed on
the SD card, use this option to
switch between the saved maps.
Select "Change map" then choose the desired map from the options
available.
■ Change map colours :
Change day and night colours used on Navigation map
For downloaded new colours;
choose a new colour, select
additional colour scheme, then
choose the desired colour from the
options available.
