2015.5 VAUXHALL MOVANO_B navigation

Navigation87
Warn when speeding: The digital map
contains speed limits for certain
roads. Audio and/or visual warnings
are triggered when the vehicle
exceeds the speed limit.
Speed limit always visible : The speed
limit for certain roads is always visible on the screen.
Alert point warnings : When the
vehicle passes an alert point, a
warning sign appears on the screen.
Notice
Warnings may not be available for
some roads and regions.Route settings
Press the Home button ; followed by
NAVI , Options then Route settings to
access the following:
■ Route planning method (Fast/
Short/ECO)
■ Motorways (On/Off)
■ Period charge (On/Off)
■ Per-use toll (On/Off)
■ Ferries (On/Off)
■ Carpool/HOV (On/Off)
■ Unpaved roads (On/Off)If necessary, press Options then
Reset to defaults to set each of these
options back to the factory default
settings.
Alternatively, when the map is
displayed (no route guidance is
active), the Route settings menu can
be accessed by pressing Options.
Refer to (NAVI 50) "Information on the display", "Map screen" above for
further information.
Route planning method : Select Fast
to set the fastest route to the
destination entered. This method
assumes the vehicle travels at or near
the speed limit on all roads.
Select Short to set the shortest route
and minimise the total distance to
travel to the destination entered.
Select Eco to set a compromise
between the fastest and the shortest
route planning methods. The route
provided may be shorter than the
fastest method, but not significantly
slower.
Motorways : To include or exclude
motorways from the route plan.Turn off, e.g. when towing a vehicle,
or when motorway driving is not
permitted.
Notice
Follow the regulations of the country in which you are driving.
Period charge : To include or exclude
roads which require a special license
to be purchased for certain periods.
Per-use toll : To include or exclude
roads for which a toll must be paid to use the road once only.
Ferries : To include or exclude the use
of ferries, ships and trains.
Carpool/HOV : To include or exclude
carpool lanes and high-occupancy
vehicle (HOV) lanes.
Unpaved roads : To include or
exclude the use of unpaved roads,
e.g. dirt, gravel roads.Map settings
Press the Home button ; followed by
NAVI , Options then Map settings to
access the following:
■ View mode (2D/3D)
■ Viewpoint (Low/Normal/High)

88Navigation
■Motorway view (On/Off)
■ POI markers
Alternatively, when the map is
displayed (no route guidance is
active), the Map settings menu can be
accessed by pressing Options.
Refer to (NAVI 50) "Information on the display", "Map screen" above for
further information.
View mode : Select View mode to
change the default map mode
between a 2D top-down view and a
3D perspective view.
Alternatively, press the Compass on
the map to switch between 2D/3D
map modes.
Viewpoint : Select Viewpoint to raise
or lower the map view.
Alternatively, when the map is
displayed (no route guidance is
active), press ⇧/⇩ to raise or lower the
map view. They are grayed-out when the maximum position is reached.
Motorway view : Select Motorway
view to switch on/off the motorway
junction view for route guidance.Refer to (NAVI 50) "Information on the
display", "Map screen" above for
further information.
POI markers : Select POI markers
then l to display a list of Points of
Interest (POI) types.
Use this screen to switch on/off (show or hide on map) certain POI type
markers on the map, e.g.
accommodation, airport, café or bar.
Select a POI type to open a list of its
subcategories and switch on/off
(show or hide) individual
subcategories.
Notice
POIs are only visible on the map
depending on the zoom level.Voice settings
Press the Home button ; followed by
NAVI , Options then Voice Settings to
change voice guidance language.
Scroll the list of languages by
pressing R/S and press OK to
confirm selection.Coordinate format
Press the Home button ; followed by
NAVI , Options then Coordinate
format to change the format of co-
ordinate entries to the following:
■ DD.DDDDD
■ DD MM.MMM
■ DD MM SS.SGPS
Press the Home button ; followed by
NAVI , Options then GPS to view the
GPS information, e.g. available
satellites, their location and signal
strength.Map update
Press the Home button ; followed by
NAVI , Options then Map update to
display the following digital map
content:
■ Alert Points
■ Junction View
■ Maps
■ Places
■ Preprocessed Road Network

Navigation89
Specific content or all map content
can be updated. Select one of the
options first or press Options then
Update . Wait for the update to
complete.
Refer to (NAVI 50) "USB memory
stick", "Updating the USB memory
stick and Navigation system" in the
"General information" section 3 69.
NAVI 80 - Setting up the navigation
system
To access the Navigation settings
menu from the Home page, press
MENU then Navigation , followed by
Settings on the display screen. The
following settings submenus are
displayed:
■ Turn off voice guidance :
Switch on/off voice guidance during navigation.
■ Route planning :
Select a planning preference type;
"Fastest route" is recommended.
The eco-route is designed to save
the most fuel.
Then switch on/off " iQ routes™" as
required. iQ routes™ enablesroutes to be calculated according to
average traffic levels during a
particular day and time, and also
the best route according to actual
traffic speeds.
■ Show POI on map :
Show or hide categories of POI
markers on the map.
■ Manage POIs :
Add, change or delete POIs or POI
categories.
■ Voice :
Select synthesised voice or a male
or female human voice (for the voice instructions) from the
available list.
Human voices provide more
simplified voice guidance
instructions and are not available
when using the Voice recognition
function 3 110.
■ EV settings :
Not used.
■ Set home location :
Change the home or most used
destination address.■ Manage saved locations :
Delete or rename saved destination
addresses.
To rename, select an address from the displayed list, press Rename
then enter a new name. Press
Done to confirm. To delete a
selected address, press Delete and
confirm when prompted.
■ Switch map :
If more than one map is installed on
the SD card, use this option to
switch between the saved maps.
Select "Change map" then choose the desired map from the options
available.
■ Change map colours :
Change day and night colours used on Navigation map
For downloaded new colours;
choose a new colour, select
additional colour scheme, then
choose the desired colour from the
options available.

90Navigation
■Car symbol :
Change the vehicle icon used on
the 3D navigation map.
■ Advanced :
Select from the following advanced options:
◆ Map information :
Show/hide information displayed
on the map, e.g. address number
before street name, street
names/current street name,
name of street after current
street.
◆ Map behaviour :
Change how the map operates
with the following options:
Show lane images (e.g. at
motorway junctions), rotate map
with vehicle direction (2D mode
only), switch to 3D mode
automatically during guidance,
zoom automatically (2D mode,
3D mode).
◆ Traffic source :
Choose a traffic information
source from the available list.Destination input
CD35 BT USB NAVI -
Destination input
Select a destination
From the main menu, select Navigate
to... , then choose from the following
options:Home
Guides you to your home.
To store the address of your home
location, see Add and save a
favourite .Favourite
A stored list of frequently visited
destinations.
■ Select Favourite and confirm.
■ Select the required destination from
the list and confirm.
To store a destination in the
favourites list, see Add and save a
favourite .
Notice
The Favourite icon will be greyed out
if no destinations have been saved
as a Favourite.Address
Enter either all or part of the address
(i.e. city and street or city centre, area
code etc.).
Notice
Only addresses known to the system through the digital map are
accepted.
■ When using for the first time, set the
destination country.
■ Enter the name of the desired city. The system may suggest several
cities (the first line is always
highlighted in yellow).
■ Select the desired city from the list of suggestions and select Done
using the soft button.
■ Proceed in the same way for Street: and House number: .

Navigation91
If the desired city does not appear in
the brief list of suggestions, a
complete list can also be accessed via the drop down arrow (in the top
right corner of the screen).
The system stores previously entered
cities in its memory. They can then be directly selected from the full list via
the drop down arrow.
Recent destination
Select a destination from the list of
addresses last used, which are
automatically stored.Point of Interest (POI)
A point of interest (POI) is a service,
establishment or tourist area close to
a location. POIs are classed in
different categories (e.g. restaurants,
museums, car parks, etc.).
Select Point of Interest and confirm,
then search for a POI from the
following options:Search by POI name
Enter the name of the POI and the
system will automatically search for
the point of interest.Search by POI category
Select the desired category type
(e.g. museum), then choose the area
required from the following options:
■ POI near you ,
■ POI in city
■ POI near Home
Select Done to start the search.Point on map
A destination from the map can be defined. Position the cursor on this
destination and confirm. The system
will calculate the route.Latitude Longitude
Defines a destination using its latitude
and longitude values.
Confirm the destination
Once the destination information has
been entered, the system calculates the route. At the end of the
calculation, the system displays the
navigation summary and suggests
two options:
■ Details : Displays details of the
journey in various forms. Refer to
(CD35 BT USB NAVI) "Route
information" in the "Guidance"
section.
■ Done : Guidance starts.
If not confirmed, this page will close
after a few seconds and guidance
starts automatically.
The IQ routes™ function can optimise the journey time using statistical data.
To activate or deactivate this function, see Route planning in the Usage
section.

92Navigation
Add and save a favourite
Select Add Favourite from the main
menu.
The location for your Favourite can be selected from the following options:Home
Save your home address as a
favourite.Favourite
Not used.Address
When entering an address, choose
from the following options:
■ City centre,
■ Street and house number,
■ Area code,
■ Crossing or junction.Recent destination
Select a favourite location from the list
of those recently entered as a
destination.Point of Interest
When adding a point of interest (POI) to your Favourites, choose from the
following options:
■ POI near you : Search from a list of
POIs near your current position.
■ POI in city : Choose a POI in a
particular town or city. The town/city
must be specified.
■ POI near Home : Search from a list
of POIs near your home location.
When navigating to a destination, a
selection can also be made from a list of POIs:
■ POI along route ,
■ POI near destination .My location
When stopped somewhere
interesting, it can be saved as a
Favourite. The system will always
suggest a name, usually the address,
but a name can be chosen. To enter
the name, just start typing.Point on map
Select the location of the Favourite
using the cursor, then select Done
using the soft button.Latitude Longitude
Creates a Favourite by entering
latitude and longitude values.
Delete or rename a favourite
Select Change preferences , then
select Manage favourites : select the
Favourite then Delete item or
Rename item using the soft button.
Prepare route in advance
Journeys can be planned in advance,
e.g. to find out how long a journey is
expected to take, or to check the
route.
Select Prepare route from the main
menu. Choose a starting point in the
same way as selecting the
destination, then select a destination. Choose the type of route and confirm.
The system plans the route and
allows details to be viewed.

Navigation93
NAVI 50 - Destination inputSelect a destination
To access the Destination menu,
press the Home button ; followed by
NAVI then Destination on the display
screen.
The following menu options are
available for entering a destination:
■ Address
Enter an address using the
keyboard.
■ Points of Interest
Select Points of Interest (POI),
e.g. petrol station, restaurant,
parking.
■ History
Select from a list of previous
destinations.
■ Favourites
Select from a saved list of favourite destinations.■ Find on map
Select a destination by using the
digital map.
■ Coordinate
Enter the co-ordinates of the
destination.
After a destination has been entered,
wait for the 10 second countdown to
expire or press OK to begin route
guidance immediately.Enter an address
Press the Home button ; followed by
NAVI , Destination then Address on
the display screen and enter part or
all of an address, e.g.:
■ Country
■ Town
■ Street
■ Number
■ Intersecting street
Notice
Full addresses can only be entered
if they are recognised by the
Navigation system.When entering an address for the first
time, press Country, then use the
keyboard to enter the name of the
country required. Alternatively, use
the drop down menu icon ó and select
from a list of suggested countries.
Notice
When entering an address, certain
letters and numbers are unavailable for selection (grayed-out) based onthe addresses recognised by the
Navigation system.
Proceed in the same way to enter
details for Town, Street , Number and
Intersecting Street .
The address is automatically stored in the memory, available for future
selection.
For keyboard operation, refer to
(NAVI 50) "Operating keyboards in
the display" in the "Usage" section
3 73.

94Navigation
Notice
Number and Intersecting Street are
only available after a Street has
been entered.
When entering a Street, it is not
necessary to specify the type of road (street, avenue, boulevard etc.).Select Points of Interest (POI)
POIs can be selected as a destination
using the following search options:
■ Preset POI list
■ POI categories
■ Quick search for POIs via the mapPreset POI list
Press the Home button ; followed by
NAVI , Destination then Points of
Interest on the display screen to
select from the frequently-used
preset categories list.
Alternatively, press Find and use the
keyboard to search for a destination
by name.POI categories
Press the Home button ; followed by
NAVI , Destination then Points of
Interest followed by Custom Searchon the display screen to select from
the list of categories and
subcategories.
The search for POIs differs
depending on the current situation:
■ If route guidance is active, Petrol
station and Restaurant POIs are
searched for along the route, and
Parking POIs are searched for
around the destination.
■ If there is no active route guidance,
POIs are searched for around the
current position.
■ If the current position is not available ( i.e. no GPS signal), POIs
are searched for around the last
known position.
The following options are available: ■ In a Town/Suburb
To search for a POI within a
selected town/suburb (the resulting
list is ordered by distance from the
town centre).
■ Along Route
To search for a POI along the
current route (the resulting list isordered by length of the required
detour).
■ Around My Position
To search for a POI around the
current position (the resulting list is
ordered by distance from this
position).
■ Around Destination
To search for a POI around the
destination of the current route (the resulting list is ordered by distance
from the destination).
When a list of POIs is displayed, they can be sorted or displayed on the
map. Press Options to display the
following:
■ Sort by name
■ Sort by distance
■ Sort by detour (if route guidance is
active)
■ Show all on map