2015.5 VAUXHALL MOVANO_B infotainment

114Phoneprepared which you should makeyourself familiar with before youuse the telephone.
Bluetooth
The Phone portal is certified by the
Bluetooth Special Interest Group
(SIG).
You will find further information about the specification on the Internet at
http://www.bluetooth.com
Phone controls
The most important phone controls
are as follows:
Controls on Infotainment system or
steering column:
■ Button 6TEL
- or -
■ Button TEL
- or -
■ PHONE on the ; Home menu
screen (NAVI 50)
- or -
PHONE in the MAIN menu screen
(NAVI 80)
Press to open the Phone menu.
Controls on steering column: ■ 7, 8 : Take call, end/reject call.
- or -
■ MODE/OK : Take call, end/reject
call, confirm an action.
■ 5: Activate/deactivate speech
recognition.
Depending on Infotainment system, some features of the handsfree
phone system can also be operated
via voice recognition 3 111.
Display screen operation
R15 BT USB, R16 BT USB,
CD16 BT USB, CD18 BT USB -
Display screen operation
■ To move up/down in the display: Turn the OK rotary knob.
■ To confirm actions: Press the OK
rotary knob.
■ To cancel actions (and return to previous menu): Press the /
button.CD35 BT USB - Display screen
operation
■ To move up/down in the display: Turn the central rotary knob.
■ To confirm actions: Press the central rotary knob.
■ To cancel actions (and return to previous menu): Press the /
button.
NAVI 50 - Display screen operation
To access the Phone menu screen, press the Home button ; followed by
PHONE on the display screen.
The following submenus are
available:
■ Phone book
■ Calling Lists
■ Dial
To switch between submenus, press
S in top left corner.
■ To move up/down in the display: Press R or S.
■ To confirm actions: Press OK.
■ To cancel actions (and return to previous menu): Press r.

Phone115
NAVI 80 - Display screen operation
To access the "Phone" menu from the Home page, press MENU followed by
Phone on the display screen.
The following submenus are
available:
■ Phonebook
■ Call logs
■ Dial a number
■ Voice mail
■ Settings
■ To move up/down in the display: Press 4 or 1.
■ To cancel actions (and/or return to previous menu): Press r.
■ To open a pop-up menu ( e.g. to add
contacts to a list of favourites):
Press <
Notice
Favourites can be accessed at any
time by pressing f on the Home
page.Operating keyboards in the
display
R15 BT USB, R16 BT USB,
CD16 BT USB, CD18 BT USB -
Operating keyboards in the display
To move within and to enter
characters in the numerical keyboard
shown on the display screen: Turn
and press the OK rotary knob.
Entries can be corrected during input
with the ← keyboard character.
Press the / button to stop using the
keyboard and return to the previous
screen.
CD35 BT USB - Operating keyboards
in the display
To move within and to enter
characters in both the alphabetical
and numerical keyboards shown on
the display screen: Turn and press
the central rotary knob.
Entries can be corrected during input
with the ← keyboard character.
Press the / button to stop using the
keyboard and return to the previous
screen.NAVI 50, NAVI 80 - Operating keyboards in the display
To move within and to enter
characters in the numerical keyboard, make the appropriate selection by
touching the display screen.
Entries can be corrected during input
with the k keyboard character.
Press the r button to stop using the
keyboard and return to the previous screen.
Connection
A mobile phone must be connected to the handsfree phone system in order
to control its functions via the
Infotainment system.
No phone can be connected to the
system unless it has first been paired.
Refer to the Bluetooth connection
section ( 3 118) for pairing a mobile
phone to the handsfree phone system via Bluetooth.
When the ignition is switched on, the handsfree phone system searches for
paired phones in the vicinity.
Bluetooth must be activated on the

Phone117
NAVI 50 - Manual connection
To change the phone connected to
the handsfree phone system, press
the Home button ; followed by
SETTINGS on the display screen.
Then select Bluetooth followed by
View Bluetooth device list . The device
list shows the phones already paired.
Select the desired phone from the list
and confirm by pressing OK.
NAVI 80 - Manual connection
To change the phone connected to
the handsfree phone system, from
the Home page, press MENU then
Phone followed by Settings on the
display screen.
Then select Manage devices . The
device list shows the phones already
paired. Select the desired phone from the list.
Disconnecting a phone
If the mobile phone is switched off, the phone is automatically disconnected
from the handsfree phone system.During disconnection, if a call is
already in progress, the conversation
will automatically switch to the mobile
phone.
R15 BT USB, R16 BT USB,
CD16 BT USB, CD18 BT USB -
Disconnecting a phone
To disconnect a phone from the
Infotainment system, press the TEL
button (or the SETUP button) and
select Bluetooth connection . Select
the desired device from the device list then select Disconnect the device by
turning and pressing the OK rotary
knob. A display message confirms
phone disconnection.
CD35 BT USB - Disconnecting a
phone
To disconnect a phone from the
Infotainment system, press the
SETUP / TEXT button and select
Bluetooth connection . Select the
desired device from the device list
then select Disconnect the device by
turning and pressing the central
rotary knob. A display message
confirms phone disconnection.NAVI 80 - Disconnecting a phone
To disconnect a phone from the
Infotainment system, from the Home
page, press MENU then Phone
followed by Settings on the display
screen.
Then select Manage devices . Select
the connected phone in the displayed
list to disconnect.
Defining the priority phoneR15 BT USB, R16 BT USB,
CD16 BT USB, CD18 BT USB -
Defining the priority phone
The priority phone is the last
connected phone.
When the ignition is switched on, the handsfree phone system searches first for the priority paired phone.
Searching continues until a paired
phone is found.
CD35 BT USB - Defining the priority
phone
The priority phone is the last
connected phone.

118Phone
When the ignition is switched on, the
handsfree phone system searches
first for the priority paired phone.
Searching continues until a paired
phone is found.
Bluetooth connection Bluetooth is a radio standard for the
wireless connection of, e.g., a
telephone with other devices.
Information such as a mobile phone
contact list and call lists can be
transferred. The functionality can be
restricted depending on the phone
model.
Prerequisites The following prerequisites must be
met, in order to control a Bluetooth-
enabled mobile phone via the
Infotainment system:
■ The Bluetooth function of the Infotainment system must be
activated.
■ The Bluetooth function of the Bluetooth-enabled mobile phone
must be activated (see mobile
phone operating instructions).■ Dependent upon the mobile phone,
it may be required to set the device to "visible" (see mobile phone
operating instructions).
■ The mobile phone must be paired and connected to the Infotainment
system.
Activating Bluetooth function of
the Infotainment system
R15 BT USB, R16 BT USB,
CD16 BT USB, CD18 BT USB -
Activating Bluetooth
To enable the Infotainment system to recognise and operate a Bluetooth-
enabled mobile phone, the Bluetooth
function must first be activated.
Deactivate the function if not
required.
Press the TEL button and select
Bluetooth by turning and pressing the
OK rotary knob.
Select ON or OFF and confirm by
pressing the knob.CD35 BT USB - Activating Bluetooth
To enable the Infotainment system to recognise and operate a Bluetooth-
enabled mobile phone, the Bluetooth
function must first be activated.
Deactivate the function if not
required.
Press the SETUP / TEXT button and
select Phone settings by turning and
pressing the central rotary knob.
Select Bluetooth activated or
Bluetooth deactivated and confirm by
pressing the knob.
NAVI 50 - Activating Bluetooth
Press the Home button ; followed by
SETTINGS on the display screen.
Select Bluetooth to display the
following options:
■ View Bluetooth device list
■ Search for Bluetooth device
■ External device authorisation
■ Change passkey
When the Bluetooth screen is
displayed, Bluetooth-enabled
devices can be paired to the
Infotainment system.

Phone119
NAVI 80 - Activating Bluetooth
To access the Phone settings menu
from the Home page, press MENU
then Phone followed by Settings on
the display screen.
The following options are displayed: ■ Manage devices
■ Sound levels
■ Voice mail
■ Turn Bluetooth on/off
■ Automatically download phone
data (on/off)
Press Turn Bluetooth on to tick the
box ☑ alongside it. Bluetooth-enabled
devices can now be paired to the
Infotainment system.
Refer to (NAVI 80) "Phone settings"
in the "Operation" section for further
information 3 122.
Pairing a mobile phone to the handsfree phone system
In order to use your handsfree phone system, a connection must be set upbetween the mobile phone and the
system via Bluetooth, i.e. the mobilephone must be paired to the vehicle
before using it. For this purpose, themobile phone must support
Bluetooth. Refer to the operating
instructions for your mobile phone.
To set up a Bluetooth connection, the handsfree phone system must be
switched on and Bluetooth must be activated on the mobile phone.
Notice
If another phone is automatically
connected during a new pairing
procedure, it will automatically be
disconnected, to allow the new
pairing procedure to continue.
Pairing enables the handsfree phone
system to recognise and store a
mobile phone in the device list. A
maximum of 5 mobile phones 1)
can be
paired and stored in the device list,
but only one can be connected at a
time.
When pairing is completed, a
message with the name of the paired phone is shown on the Infotainment
system display screen and the phone is automatically connected to thehandsfree phone system. The mobile
phone can then be operated via the
Infotainment system controls.
Notice
When a Bluetooth connection is
active, using the handsfree phone
system will discharge the mobile phone battery more rapidly.
R15 BT USB, R16 BT USB,
CD16 BT USB, CD18 BT USB -
Pairing a mobile phone
To pair a phone to the handsfree
phone system, press the TEL button
and select Pair device by turning and
pressing the OK rotary knob. The
Ready to Pair screen is displayed.
On the mobile phone, search for
Bluetooth equipment in the vicinity of
the device.
Select My Radio (i.e. the name of the
handsfree phone system) from the list
on the mobile phone, then, on the
mobile phone keypad, enter the
pairing code shown on the
Infotainment system display screen.1) A maximum of 8 mobile phones with NAVI 50.

120Phone
If pairing fails, the system returns to
the previous menu and a
corresponding message is displayed.
Repeat procedure if necessary.
CD35 BT USB - Pairing a mobile
phone
To pair a phone to the handsfree
phone system, press the
SETUP / TEXT button and select
Bluetooth connection from the
settings menu. Select an empty slot by turning the central rotary knob and press the knob to display the next
menu.
Select Pair phone by turning and
pressing the central rotary knob, then,
on the mobile phone, search for
Bluetooth equipment in the vicinity of the phone.
Select My_Radio (i.e. the name of
handsfree phone system) from the list
on the mobile phone, then on the
mobile phone keypad enter the
pairing code shown on the
Infotainment system display screen.If pairing fails, the message Pairing
failed is displayed. Repeat procedure
if necessary.
NAVI 50 - Pairing a mobile phone
Press the Home button ; followed by
SETTINGS on the display screen.
Select Bluetooth then either Search
for Bluetooth device or External
device authorisation .
Alternatively, when in the Phone
menu screen, press z on the display.
On the mobile phone, search for
Bluetooth equipment in the vicinity of
the device.
Select MEDIA-NAV (i.e. the name of
the handsfree phone system) from
the list on the mobile phone, then (if required), on the mobile phone
keypad, enter the pairing code shown
on the Infotainment system display
screen.
The default pairing code is 0000. To
change this pairing code before the
pairing procedure is started, select
Change passkey to update.If pairing fails, repeat procedure if
necessary.
NAVI 80 - Pairing a mobile phone To access the Phone settings menu
from the Home page, press MENU
then Phone followed by Settings on
the display screen.
Select Manage devices from the list of
options. A message appears on the
display asking if you wish to set up a
Bluetooth connection between your
device and the Infotainment system.
Select Yes to continue. The
Infotainment system begins a search
for Bluetooth equipment in the vicinity
and displays a list of devices.
Select your device from the displayed list. Depending on phone model,
confirm the pairing request or enter
the pairing code on the mobile phone keypad to pair it to the Infotainmentsystem.
To pair further devices, from the
Manage devices screen, press < to
open a pop-up menu and select Add
to pair additional devices in the same
way.

122Phone9Warning
Bear in mind that you can only
make and receive calls with the
mobile phone if it is in a service
area with a sufficiently strong
signal.
Under certain circumstances,
emergency calls cannot be made on all mobile phone networks; it is also possible that emergency callscannot be made when certain
network services and/or telephone functions are active. Consult your
network provider for more
information.
The emergency call number
differs depending on country or
region. Please enquire
beforehand about the correct
emergency call number for the
relevant country or region.
Dial the emergency call number (refer
to "Operation" 3 122); A telephone
connection to the emergency call
centre is set up.
Answer when the service personnel
questions you about the emergency.9 Warning
Do not end the call until you are
requested to do so by the
emergency call centre.
NAVI 50
To view the emergency number for
the current location, press the Home
button ; followed by MAP on the
display screen.
Press Options then Where am I? .
When the Where am I? screen is
displayed, press Options followed by
Country information on the display
screen: Emergency number (e.g.
112) is shown on the display.
Operation Introduction
When a Bluetooth connection has
been set up between your mobile phone and the handsfree phone
system, certain functions of your
mobile phone can be operated via the Infotainment system controls or
display.
It is then possible, e.g., to import the
contacts and telephone numbers
stored in your mobile phone into the
handsfree phone system.
After connection, the mobile phone
data is transmitted to the handsfree
phone system. This can take some
time, depending on phone model. During this period, operation of the
mobile phone is possible via the
Infotainment system only to a limited extent.
Notice
Not every mobile phone supports
the functions of the handsfree phone
system. Therefore, deviations from
the range of functions described are possible.

Phone123
Phone menu
To display the Phone menu:
■ Press button 6TEL
- or -
■ Press button TEL
- or -
■ Press the Home button ; followed
by PHONE on the display screen
(NAVI 50)
■ From the Home page, press MENU followed by Phone on the
display screen (NAVI 80).
Volume control R15 BT, R16 BT USB, CD16 BT,
CD18 BT USB - Volume control
During a call, turn m rotary knob or
press ! or # (on the steering column
controls) to change the call volume.
CD35 BT USB - Volume control
To preset the volume for calls, voice
recognition or the ringtone, press the
SETUP / TEXT button and select
Phone settings from the settings
menu, followed by Volume.Select the desired option (e.g.
Ringing volume ) and adjust the
volume with the central rotary knob.
During a call, turn volume rotary knob
or press ! or # (on the steering
column controls) to change the call
volume.
NAVI 50 - Volume control
During a call, press button < or ] on
the Infotainment unit to change the call volume.
Alternatively (with the steering
column controls), press button ! or
# .
NAVI 80 - Volume control
During a call, turn the X rotary knob
on the Infotainment unit to change the
call volume.
Alternatively (with the steering
column controls), press button ! or
# .Dialling a telephone number
Several options are available for
dialling telephone numbers, including calling a contact from the phonebook
or from a call log. Numbers can also
be dialled manually.
Entering a number manually R15 BT USB, R16 BT USB,
CD16 BT USB, CD18 BT USB -
Entering a number manually
With the Phone menu displayed,
select Dial from the list.
Enter the desired number using the
numerical keyboard ( 3 113) and
select 7 to start dialling.
To redial the last number, press and
hold the TEL button.
CD35 BT USB - Entering a number manually
With the Phone menu displayed,
select Dial a number from the list.