2015.5 VAUXHALL MOVANO_B reset

Navigation87
Warn when speeding: The digital map
contains speed limits for certain
roads. Audio and/or visual warnings
are triggered when the vehicle
exceeds the speed limit.
Speed limit always visible : The speed
limit for certain roads is always visible on the screen.
Alert point warnings : When the
vehicle passes an alert point, a
warning sign appears on the screen.
Notice
Warnings may not be available for
some roads and regions.Route settings
Press the Home button ; followed by
NAVI , Options then Route settings to
access the following:
■ Route planning method (Fast/
Short/ECO)
■ Motorways (On/Off)
■ Period charge (On/Off)
■ Per-use toll (On/Off)
■ Ferries (On/Off)
■ Carpool/HOV (On/Off)
■ Unpaved roads (On/Off)If necessary, press Options then
Reset to defaults to set each of these
options back to the factory default
settings.
Alternatively, when the map is
displayed (no route guidance is
active), the Route settings menu can
be accessed by pressing Options.
Refer to (NAVI 50) "Information on the display", "Map screen" above for
further information.
Route planning method : Select Fast
to set the fastest route to the
destination entered. This method
assumes the vehicle travels at or near
the speed limit on all roads.
Select Short to set the shortest route
and minimise the total distance to
travel to the destination entered.
Select Eco to set a compromise
between the fastest and the shortest
route planning methods. The route
provided may be shorter than the
fastest method, but not significantly
slower.
Motorways : To include or exclude
motorways from the route plan.Turn off, e.g. when towing a vehicle,
or when motorway driving is not
permitted.
Notice
Follow the regulations of the country in which you are driving.
Period charge : To include or exclude
roads which require a special license
to be purchased for certain periods.
Per-use toll : To include or exclude
roads for which a toll must be paid to use the road once only.
Ferries : To include or exclude the use
of ferries, ships and trains.
Carpool/HOV : To include or exclude
carpool lanes and high-occupancy
vehicle (HOV) lanes.
Unpaved roads : To include or
exclude the use of unpaved roads,
e.g. dirt, gravel roads.Map settings
Press the Home button ; followed by
NAVI , Options then Map settings to
access the following:
■ View mode (2D/3D)
■ Viewpoint (Low/Normal/High)

94Navigation
Notice
Number and Intersecting Street are
only available after a Street has
been entered.
When entering a Street, it is not
necessary to specify the type of road (street, avenue, boulevard etc.).Select Points of Interest (POI)
POIs can be selected as a destination
using the following search options:
■ Preset POI list
■ POI categories
■ Quick search for POIs via the mapPreset POI list
Press the Home button ; followed by
NAVI , Destination then Points of
Interest on the display screen to
select from the frequently-used
preset categories list.
Alternatively, press Find and use the
keyboard to search for a destination
by name.POI categories
Press the Home button ; followed by
NAVI , Destination then Points of
Interest followed by Custom Searchon the display screen to select from
the list of categories and
subcategories.
The search for POIs differs
depending on the current situation:
■ If route guidance is active, Petrol
station and Restaurant POIs are
searched for along the route, and
Parking POIs are searched for
around the destination.
■ If there is no active route guidance,
POIs are searched for around the
current position.
■ If the current position is not available ( i.e. no GPS signal), POIs
are searched for around the last
known position.
The following options are available: ■ In a Town/Suburb
To search for a POI within a
selected town/suburb (the resulting
list is ordered by distance from the
town centre).
■ Along Route
To search for a POI along the
current route (the resulting list isordered by length of the required
detour).
■ Around My Position
To search for a POI around the
current position (the resulting list is
ordered by distance from this
position).
■ Around Destination
To search for a POI around the
destination of the current route (the resulting list is ordered by distance
from the destination).
When a list of POIs is displayed, they can be sorted or displayed on the
map. Press Options to display the
following:
■ Sort by name
■ Sort by distance
■ Sort by detour (if route guidance is
active)
■ Show all on map

Phone123
Phone menu
To display the Phone menu:
■ Press button 6TEL
- or -
■ Press button TEL
- or -
■ Press the Home button ; followed
by PHONE on the display screen
(NAVI 50)
■ From the Home page, press MENU followed by Phone on the
display screen (NAVI 80).
Volume control R15 BT, R16 BT USB, CD16 BT,
CD18 BT USB - Volume control
During a call, turn m rotary knob or
press ! or # (on the steering column
controls) to change the call volume.
CD35 BT USB - Volume control
To preset the volume for calls, voice
recognition or the ringtone, press the
SETUP / TEXT button and select
Phone settings from the settings
menu, followed by Volume.Select the desired option (e.g.
Ringing volume ) and adjust the
volume with the central rotary knob.
During a call, turn volume rotary knob
or press ! or # (on the steering
column controls) to change the call
volume.
NAVI 50 - Volume control
During a call, press button < or ] on
the Infotainment unit to change the call volume.
Alternatively (with the steering
column controls), press button ! or
# .
NAVI 80 - Volume control
During a call, turn the X rotary knob
on the Infotainment unit to change the
call volume.
Alternatively (with the steering
column controls), press button ! or
# .Dialling a telephone number
Several options are available for
dialling telephone numbers, including calling a contact from the phonebook
or from a call log. Numbers can also
be dialled manually.
Entering a number manually R15 BT USB, R16 BT USB,
CD16 BT USB, CD18 BT USB -
Entering a number manually
With the Phone menu displayed,
select Dial from the list.
Enter the desired number using the
numerical keyboard ( 3 113) and
select 7 to start dialling.
To redial the last number, press and
hold the TEL button.
CD35 BT USB - Entering a number manually
With the Phone menu displayed,
select Dial a number from the list.