2015.5 VAUXHALL MOVANO_B steering

84Navigation
To scroll through the images in
slideshow mode, select Slideshow
using the right soft button ⌟ and set
the seconds-per-slide when
prompted, using the directional
buttons.
To set the slideshow to manual mode, select Manual by moving to the far
right of the seconds-per-slide display,
then use the directional buttons to
scroll through the images manually.
Start the slideshow by pressing the
right soft button ⌟.
Images can be added or deleted
when updating the Navigation
system.
Compatible image formats are: ■ JPG: Greyscale and RGB
■ BMP: 1-bit, 2 colours; 4-bit, 16 colours; 8-bit, 256 colours and24-bit, 16.7 million coloursSETTING UP THE
NAVIGATION SYSTEM
CD35 BT USB NAVI - Setting up the
navigation systemNavigation volume
To change the volume during a voice
instruction, turn the X knob or press
< or ].
Alternatively, press button ! or # on
the steering column controls to change the volume.
To repeat a voice instruction, press
the left soft button ⌞.System preferences
The system can be adjusted to suit
personal requirements. Select
Change preferences in the main
menu to view the adjustable
preferences.
Certain menu items can also be found more quickly in the Quick menu.
Press the central button on the
remote control to open the Quick
menu .Change Home location
To change the location of your
designated home.Manage favourites
To delete stored favourite
destinations. Select the desired entry followed by Done using the soft
button to delete the entry.Switch map
Used if installing several maps on the
SD card. To change map, select
Switch map , then select the map
required.Voice preferences
To select a voice used to give voice
instructions and to select either
human or synthesised voices.
The human voice instructions provide
simplified guidance only, while the
synthesised voice instructions
provide road directions plus
additional information (e.g. traffic
signs and traffic information etc.).Disable voice
To deactivate the voice instructions
and use only the map screen for
guidance.

110Voice recognitionVoice recognitionGeneral information...................110
Navigation control ......................111
Phone control ............................ 111General information
The voice recognition function allows
you to operate certain functions via
voice input.
To ensure that conversations held
inside the vehicle do not start
unintentional calls to a saved contact, the voice recognition function must
first be activated via button 5 on the
steering column controls.
Control elements overview 3 6.
CD35 BT USB The voice recognition function of thehandsfree phone system allows you
to operate certain functions of the
mobile phone via voice input.
Voice tags can be created for the
contacts in the vehicle phonebook
enabling you to call a contact without
manually selecting the caller name or
number.
In the event of incorrect operation, the voice recognition function requests
you to repeat the desired command,
or plays back the available options.NAVI 80
The voice recognition function allows
you to operate certain functions via
voice input, including:
■ Navigation
Refer to "Navigation control" in this
section 3 111.
■ Phone
Refer to "Phone control" in this section 3 111.
■ Applications
Press button 5 on the steering
column controls to open the Voice
control main menu. After the tone,
say " Applications " followed by the
name of the desired application to start it.
When activated, the Voice control
main menu is displayed and the voice
recognition indicator in the top right
corner indicates system status and
optimisation levels:

Voice recognition111
Green=optimal voice
recognitionOrange=good voice
recognitionRed=average voice
recognitionMicrophone é=System is ready to
receive a voice
commandLoudspeaker
l=Voice instructions
are currently being
given by the systemLoading icon=Data currently
loading
Navigation control
NAVI 80
Activating voice recognition
To activate the voice recognition
function:
Press button 5 on the steering
column controls to open the Voice
control main menu.
After the tone, say " Destination" to
enter a new address. Say " Address"
then say the full destination of a new
address (number, street name,
destination town/city).
The address recognised by the
system is displayed. Confirm
destination when prompted to begin guidance.
Alternatively, after the tone say
" Recent destinations " to access a list
of the most recent destinations
entered and select the desired
destination.
For further information, refer to
(NAVI 80) "Destination input" in the
"Navigation" section 3 90.
Phone control CD35 BT USB Creating voice tags
In addition to names and numbers,
voice tags can be created when new
contacts are added to the vehicle
phonebook. Refer to "Operation" in
the "Phone" section 3 122.Voice tags can also be added or
modified afterwards by selecting the following menus and options:
■ Directory Management ,
■ Vehicle phonebook ,
■ Modify this contact .
Select the contact to be modified from the list of contacts, then select the
following menu options by turning and
pressing the rotary knob:
■ (voice tag) ,
■ Launch voice tag recording ,
When prompted to record a voice tag,
speak after the tone. A message asks for the voice tag to be repeated. If the
system does not recognise the
repeated voice tag, it will request it to
be repeated again. A message
confirms that the voice tag has been
recorded successfully.
Upon completion, ensure the voice
tag is stored along with other contact
details by selecting Memorise.
Activating voice recognition
To activate the voice recognition
function:

112Voice recognition
Press button 5 on the steering
column controls
After the tone, repeat the voice tag previously recorded for the desired
contact to start the dialling process.
Say the voice tag directly, i.e. do not
say 'Call' before the voice tag.
If the system does not recognise the
voice tag, a message asks you to
repeat it. If the voice tag is still not
recognised, the list of recorded voice
tags is played back. Repeat the
desired voice tag when it is played
back, to start the dialling process.
In the event the system still does not
recognise the voice tag, the voice
recognition function is automatically
deactivated.
NAVI 80
Activating voice recognition
To activate the voice recognition
function:
Press button 5 on the steering
column controls to open the Voice
control main menu.After the tone, say " Phone" to access
the Phone menu. Say the name of a
saved contact or a telephone number. The desired contact appears in the
display when registered by the
system.
Say " Call" to start the dialling process.
Say " Delete " to cancel input and retry.
Alternatively, to initiate a call directly
from the Voice control main menu,
press button 5 and say the name of a
saved contact or a telephone number.

114Phoneprepared which you should makeyourself familiar with before youuse the telephone.
Bluetooth
The Phone portal is certified by the
Bluetooth Special Interest Group
(SIG).
You will find further information about the specification on the Internet at
http://www.bluetooth.com
Phone controls
The most important phone controls
are as follows:
Controls on Infotainment system or
steering column:
■ Button 6TEL
- or -
■ Button TEL
- or -
■ PHONE on the ; Home menu
screen (NAVI 50)
- or -
PHONE in the MAIN menu screen
(NAVI 80)
Press to open the Phone menu.
Controls on steering column: ■ 7, 8 : Take call, end/reject call.
- or -
■ MODE/OK : Take call, end/reject
call, confirm an action.
■ 5: Activate/deactivate speech
recognition.
Depending on Infotainment system, some features of the handsfree
phone system can also be operated
via voice recognition 3 111.
Display screen operation
R15 BT USB, R16 BT USB,
CD16 BT USB, CD18 BT USB -
Display screen operation
■ To move up/down in the display: Turn the OK rotary knob.
■ To confirm actions: Press the OK
rotary knob.
■ To cancel actions (and return to previous menu): Press the /
button.CD35 BT USB - Display screen
operation
■ To move up/down in the display: Turn the central rotary knob.
■ To confirm actions: Press the central rotary knob.
■ To cancel actions (and return to previous menu): Press the /
button.
NAVI 50 - Display screen operation
To access the Phone menu screen, press the Home button ; followed by
PHONE on the display screen.
The following submenus are
available:
■ Phone book
■ Calling Lists
■ Dial
To switch between submenus, press
S in top left corner.
■ To move up/down in the display: Press R or S.
■ To confirm actions: Press OK.
■ To cancel actions (and return to previous menu): Press r.

Phone123
Phone menu
To display the Phone menu:
■ Press button 6TEL
- or -
■ Press button TEL
- or -
■ Press the Home button ; followed
by PHONE on the display screen
(NAVI 50)
■ From the Home page, press MENU followed by Phone on the
display screen (NAVI 80).
Volume control R15 BT, R16 BT USB, CD16 BT,
CD18 BT USB - Volume control
During a call, turn m rotary knob or
press ! or # (on the steering column
controls) to change the call volume.
CD35 BT USB - Volume control
To preset the volume for calls, voice
recognition or the ringtone, press the
SETUP / TEXT button and select
Phone settings from the settings
menu, followed by Volume.Select the desired option (e.g.
Ringing volume ) and adjust the
volume with the central rotary knob.
During a call, turn volume rotary knob
or press ! or # (on the steering
column controls) to change the call
volume.
NAVI 50 - Volume control
During a call, press button < or ] on
the Infotainment unit to change the call volume.
Alternatively (with the steering
column controls), press button ! or
# .
NAVI 80 - Volume control
During a call, turn the X rotary knob
on the Infotainment unit to change the
call volume.
Alternatively (with the steering
column controls), press button ! or
# .Dialling a telephone number
Several options are available for
dialling telephone numbers, including calling a contact from the phonebook
or from a call log. Numbers can also
be dialled manually.
Entering a number manually R15 BT USB, R16 BT USB,
CD16 BT USB, CD18 BT USB -
Entering a number manually
With the Phone menu displayed,
select Dial from the list.
Enter the desired number using the
numerical keyboard ( 3 113) and
select 7 to start dialling.
To redial the last number, press and
hold the TEL button.
CD35 BT USB - Entering a number manually
With the Phone menu displayed,
select Dial a number from the list.

Phone127
■c : Missed calls.
■ a: Dialled numbers.
The most recent calls are displayed at
the top. Alternatively, press 4 or 1 to
move up/down in the display.
Select the desired contact from the
chosen call list to start the dialling
process.
Notice
If necessary, press < (to open a
pop-up menu) and select Update
telephone data to update the call
lists.
Voicemail box
R15 BT USB, R16 BT USB,
CD16 BT USB, CD18 BT USB,
CD35 BT USB - Voicemail box
To listen to mobile phone voicemail
messages via the Infotainment
system while the phone is connected, select the Voicemail box menu.
NAVI 80 - Voicemail box
To listen to mobile phone voicemail
messages via the Infotainment
system while the phone is connected,from the Home page, press MENU
then Phone followed by Voice mail on
the display screen.
The configuration screen will be
displayed if the voicemail box is not configured. Enter number on the
numerical keyboard and confirm.
Receiving calls R15 BT USB, R16 BT USB,
CD16 BT USB, CD18 BT USB -
Receiving calls
To accept the call, depending on
vehicle configuration:
■ Briefly press the 7 button (on the
steering column controls)
■ Select the 7 icon in the display (by
turning and pressing the OK rotary
knob)
To reject the call, depending on
vehicle configuration:
■ Press and hold the 8 button (on the
steering column controls)
■ Select the } icon in the display (by
turning and pressing the OK rotary
knob)When receiving a call, the caller
number may be shown on the
Infotainment system display screen. If
the number is stored in the system
memory, the name is displayed
instead. If the number cannot be
displayed, the message Private
number is shown.
CD35 BT USB - Receiving calls
To accept the call, briefly press the
7 button (on the steering column
controls).
To reject the call: ■ Press and hold the 8 button (on the
steering column controls), or
■ Select Refuse in the display (by
turning and pressing the central rotary knob)
When receiving a call, the caller
number may be shown on the
Infotainment system display screen. If the number is stored in the system
memory, the name is displayed
instead. If the number cannot be
displayed, the message Unknown is
shown.

128Phone
The handsfree phone system
ringtone is dependent upon the
phone model and mode (silent,
vibrate, etc.).Automatic call waiting
For safety reasons, the automatic call
waiting function is set by default. It is
recommended that this feature
remains activated.
When an incoming call arrives, a
message alerts the caller to the fact that you are driving. The call starts
automatically and the length of the
call is shown on the Infotainment
system display screen. Pick up the
call only when it is safe to do so.
To deactivate automatic call waiting,
refer to (CD35 BT USB) "Activate/
deactivate automatic call waiting" in
the "Phone settings" section.
With automatic call waiting
deactivated, it is possible to reject the
call by selecting Refuse or by
pressing and holding the 8 button. To
place the caller on hold, select
Pause ; the caller is informed they are
on hold via an automatic message.Temporarily override the automatic
call waiting feature by selecting
Resume or press the 7 button to
receive the call.
NAVI 50 - Receiving calls
To accept the call:
■ Press Accept on the display
screen.
■ Briefly press the 7 button (on the
steering column controls)
To reject the call: ■ Press Refuse on the display
screen.
■ Press and hold the 8 button (on the
steering column controls)
When receiving a call, the caller
number may be shown on the
Infotainment system display screen. If
the number is stored in the system
memory, the name is displayed
instead. If the number cannot be
displayed, the message Unknown is
shown.NAVI 80 - Receiving calls
To accept the call:
■ Press Pick up on the display
screen.
■ Briefly press the 7 button (on the
steering column controls)
To reject the call: ■ Press Reject on the display screen.
■ Press and hold the 8 button (on the
steering column controls)
When receiving a call, the caller
number may be shown on the
Infotainment system display screen. If the number is stored in the system
memory, the name is displayed
instead. If the number cannot be displayed, the message No Caller ID
is shown.