2014 YAMAHA GRIZZLY 350 tow

[x] Cancel search: tow

Page 15 of 144

YAMAHA GRIZZLY 350 2014  Owners Manual 1-5
1
**.* kPa
*.** kgf/cm²*.* psi **.* kPa
*.** kgf/cm²
*.* psi
This pictogram shows trailer Hitch Tow 
weight limit. (Combined weight of the trailer 
and all cargo in the trailer.)
Overloading can

Page 35 of 144

YAMAHA GRIZZLY 350 2014  Owners Manual 4-8
4
3. Tighten the locknut.
EBU18391Front brake lever The front brake lever is located on the right handle-
bar. To apply the front brake, pull the brake lever
toward the handlebar grip.
EBU18442Bra

Page 59 of 144

YAMAHA GRIZZLY 350 2014  Owners Manual 6-7
6
market products or having other modifications
performed to your ATV that change any of the ve-
hicle’s design or operation characteristics can put
you and others at greater risk of serious inj

Page 60 of 144

YAMAHA GRIZZLY 350 2014  Owners Manual 6-8
6
●Do not exceed the maximum tongue weight.
You can measure tongue weight with a bath-
room scale. Put the tongue of the loaded trailer
on the scale with the tongue at hitch height. Ad-
just the

Page 66 of 144

YAMAHA GRIZZLY 350 2014  Owners Manual 7-6
7opening, even when the throttle lever is pushed to
the maximum. Turning in the adjusting screw limits
the maximum engine power available and de-
creases the maximum speed of the ATV. Turning
in t

Page 67 of 144

YAMAHA GRIZZLY 350 2014  Owners Manual 7-7
7
Drive more slowly than you would without a load.
The more weight you carry, the slower you should
go. Although conditions vary, it is good practice to
drive slowly (shift into first gear or low

Page 73 of 144

YAMAHA GRIZZLY 350 2014  Owners Manual 7-13
7
This procedure should be practiced at slow speed
many times in a large unpaved area with no obsta-
cles. If an incorrect technique is used, your ATV
may continue to go straight. If the ATV does

Page 129 of 144

YAMAHA GRIZZLY 350 2014  Owners Manual 8-46
8
3. Elevate the ATV and place a suitable stand
under the frame.
4. Remove the nuts from the wheel.
5. Remove the wheel.
EBU25701Installing a wheel 1. Place the ATV on a level surface.
2. Install
Page:   1-8 9-16 next >