2014 YAMAHA GRIZZLY 350 belt

[x] Cancel search: belt

Page 9 of 144

YAMAHA GRIZZLY 350 2014  Owners Manual Starting a warm engine  .............................. 6-3
Operating the drive select lever and driving in reverse  ................................................. 6-3
Engine break-in  .............

Page 26 of 144

YAMAHA GRIZZLY 350 2014  Owners Manual 3-1
3
EBU17680
DESCRIPTION 
EBU17690Left view
EBU17700Right view
1. Fuel cock
2. Throttle stop screw
3. Air filter case
4. Fuses
5. Battery
6. Tail/brake light
7. Engine oil filler cap
8. Oil filter c

Page 79 of 144

YAMAHA GRIZZLY 350 2014  Owners Manual 7-19
7
The ATV can be used to cross slow moving, shal-
low water of up to a maximum of 35 cm (14 in) in
depth. Before entering the water, choose your path
carefully. Enter where there is no sharp drop

Page 80 of 144

YAMAHA GRIZZLY 350 2014  Owners Manual 7-20
7
1. Air filter case check hose
1. V-belt cooling duct check hose (left front side of ATV)
1. Storage compartment check hose
1. V-belt case drain plug
U1NS62E0.book  Page 20  Monday, April 8, 201

Page 107 of 144

YAMAHA GRIZZLY 350 2014  Owners Manual 8-24
8
WARNING
EWB02340Do not start the engine when cleaning the
spark arrester, otherwise it could cause injury
to the eyes, burns, carbon monoxide poison-
ing, possibly leading to death, and start a

Page 136 of 144

YAMAHA GRIZZLY 350 2014  Owners Manual 10-2
10
Type:SAE 5W-30, 10W-30, 10W-40, 15W-40, 20W-40 or 20W-
50
Recommended engine oil grade: API service SG type or higher, JASO standard MA
Engine oil quantity: Without oil filter cartridge replac

Page 137 of 144

YAMAHA GRIZZLY 350 2014  Owners Manual 10-3
10
Secondary reduction ratio:41/21  × 24/18 ×  33/9 (9.545)
Transmission type: V-belt automatic
Operation:
Left hand operation
Forward gear: 35/20 (1.750)
Reverse gear: 26/15 (1.733)Chassis:Fra

Page 143 of 144

YAMAHA GRIZZLY 350 2014  Owners Manual Light switch  .................................................................... 4-5MMain switch  .................................................................... 4-1
Maintenance and lubrication