04 Interior
Front seats
04
104* Option/accessory, for more information, see Introduction.
Manually adjusted front seats
G027214
Front-rear adjustment: lift the bar and move the seat to the position of yourchoice.
Raise/lower the front edge of the seat cushion*: use the control to pump thefront edge of the cushion up or down.
Raise/lower seat height: pump the seat up or down.
Lumbar support: turn the control for firmer or softer lumbar support.
Backrest tilt: turn the control to adjust the angle of the backrest.
Control panel for optional power seat (see page 105 for more information).
WARNING
• Do not adjust the seat while driving. The seat should be adjusted so thatthe brake pedal can be depressedfully. In addition, position the seat asfar rearward as comfort and controlallow.
• Check that the seat is securely lockedinto position after adjusting.
Folding the backrests in the front seat*
G014805
The front passenger seat backrest can be folded to a horizontal position to make roomfor a long load. Fold the backrest as follows: 1. Move the seat as far back as possible.
2. Adjust the backrest to the upright posi-
tion.
3. Lift the catches on the rear of the back- rest.
4. Without releasing the catches, push the backrest forward.
5. Move the seat as far forward as possible so that the head restraint slides under the glove compartment.
WARNING
•When transporting long objects, cover sharp edges on the load to help pre-vent injury to occupants. Secure theload to help prevent shifting duringsudden stops.
• When the seat's backrest is returnedto the upright position, push and pull itto be sure that it is securely locked inthis position.
04 Interior
Front seats
04
* Option/accessory, for more information, see Introduction.107
3. With the
MEM button depressed, press
button 1 briefly to store the seat's current position.
To move the seat to the position that it was inwhen button 1 was programmed: Press and hold down button 1 until the seat stops moving. As a safety precaution, the seat will stopautomatically if the button is released beforethe seat has reached the preset position.
Front seats*
G030180
Massage
Lumbar support
Massage
G030183
Massage control
Firm massage
Gentle massage
Each front seat has a massage function in its backrest. The massage action is done with aircushions, which can be adjusted to a firm orgentle setting. When the setting has beenmade, the massaging action is carried out incycles as follows: massage 6 minutes –pause 4 minutes – massage 6 minutes, etc. When the button is in the center position or if the ignition is in position 0, the massage func-
tion is switched off.
Lumbar support
G030229
Lumbar support control
The lumbar support uses the same air cush- ions as the massage function. The button canbe used to adjust the amount of support infour directions, as shown in the illustration. Lumbar support can be only be adjusted when the massage function is switched off. A memory function stores the lumbar support setting and this support will resume after themassage function has been switched off orafter the vehicle has been parked for anextended period of time.
