02 Instruments and controls
Steering wheel adjustment
02
66
G026999
Both the height and the reach of the steering wheel can be adjusted to a comfortable posi-tion for the driver. Pull down the lever on theleft of the steering column. Adjust the steer-ing wheel to a suitable position and press thelever back into place to lock the steeringwheel in the new position. Check that thesteering wheel is locked in the new position.
WARNING
Never adjust the steering wheel while driv- ing.
04 Interior
Front seats
04
104* Option/accessory, for more information, see Introduction.
Manually adjusted front seats
G027214
Front-rear adjustment: lift the bar and move the seat to the position of yourchoice.
Raise/lower the front edge of the seat cushion*: use the control to pump thefront edge of the cushion up or down.
Raise/lower seat height: pump the seat up or down.
Lumbar support: turn the control for firmer or softer lumbar support.
Backrest tilt: turn the control to adjust the angle of the backrest.
Control panel for optional power seat (see page 105 for more information).
WARNING
• Do not adjust the seat while driving. The seat should be adjusted so thatthe brake pedal can be depressedfully. In addition, position the seat asfar rearward as comfort and controlallow.
• Check that the seat is securely lockedinto position after adjusting.
Folding the backrests in the front seat*
G014805
The front passenger seat backrest can be folded to a horizontal position to make roomfor a long load. Fold the backrest as follows: 1. Move the seat as far back as possible.
2. Adjust the backrest to the upright posi-
tion.
3. Lift the catches on the rear of the back- rest.
4. Without releasing the catches, push the backrest forward.
5. Move the seat as far forward as possible so that the head restraint slides under the glove compartment.
WARNING
•When transporting long objects, cover sharp edges on the load to help pre-vent injury to occupants. Secure theload to help prevent shifting duringsudden stops.
• When the seat's backrest is returnedto the upright position, push and pull itto be sure that it is securely locked inthis position.
