x Screw the towing eye counterclockwise into the threaded hole as far as it will go ⇒ fig. 210 ⇒ . Use the lug wrench to turn and tighten the towing eye.
x When towing is complete, unscrew the towing eye clockwise to remove it.
x Position the bottom of the cover in the opening in the bumper and carefully push the top of the cover over the edge of the opening.
x Push on the cover until it locks into place.
NOTICE
Always make sure the towing eye is screwed all the way into threaded hole so that it is secure. If not, it could be pulled out while your vehicle is being towed.
Driving tips while towing
