2014 VAUXHALL ADAM bulb

Vehicle care159Front turn signal lights
1. Undo screw and remove cover.
2. Undo screw and remove lightassembly from the bumper.
3. Disengage and remove the bulbsocket by turning anticlockwise.
4. Remove bulb by turninganticlockwise a little and
withdrawing. Replace the bulb.
5. Insert the bulb socket into the assembly and turn clockwise.
6. Attach light assembly into the bumper and fix with the screw.
7. Insert cover into the bumper and fix with the screw.
Tail lights
1. Release the cover on the respective side and remove.

160Vehicle care
Version with subwoofer box:
remove load compartment floor
cover, on right side also remove
the tool box to gain access to the
cover 3 63.
Version with storage box: remove
storage box to gain access to the
cover 3 61.
2. Unscrew the plastic securing nut
from the inside by hand.
3. Carefully withdraw the lightassembly from the recesses and
remove.
4. Turn bulb holder anticlockwise and remove. Replace bulb by
withdrawing:
Turn signal light 1
Tail light 2
Tail light/Brake light 3
Version with Light Emitting Diode (LED)
Only turn signal light 1 can be
changed.
5. Insert and turn bulb holder clockwise into the tail light
assembly. Ensure the wires
remain in the cable ducts.

Vehicle care161
Fit light assembly with theretaining pins into the recesses of
the vehicle body and tighten the
securing nut from inside the load compartment. Pull the circular
gasket over the recess in the lamp housing.
Close cover and engage.
Reversing light/rear fog light Reversing light is located on the right
side of the bumper, and the rear fog
light is located on the left side of the
bumper for left-hand drive vehicles,
and vice versa for right hand drive
models.
The description of bulb replacement
is the same for both.
1. Undo screw and remove cover.
2. Undo screw and remove light assembly from the bumper.
3. Disengage and remove the bulbsocket by turning anticlockwise.

162Vehicle care
4. Remove bulb by turninganticlockwise slightly and
withdrawing. Replace the bulb.
5. Insert the bulb socket into the assembly and turn clockwise.
6. Replace light assembly in the bumper and fix with the screw.
7. Insert cover into the bumper and fix with the screw.
Side turn signal lights
To replace bulb, remove lamp
housing:1. On left vehicle side, slide lamp to the front and remove it out of the
wing with the rear end.
On right vehicle side, slide lamp to
the rear and remove it out of the wing with the front end.
2. Turn bulb holder anticlockwise and remove from housing.
3. Pull bulb from bulb holder andreplace it.
4. Insert bulb holder and turn clockwise.
5. On left vehicle side: insert front end into fender, slide forward and
insert rear end.
On right vehicle side: insert rear
end into fender, slide rearward
and insert front end.

Vehicle care163Number plate light
1.Insert screwdriver in recess of the
cover, press to the side and
release spring.
2. Remove lamp downwards, taking care not to pull on the cable.
3. Remove bulb holder from lamp housing by turning anticlockwise.
4. Pull bulb from bulb holder andreplace it.
5. Insert bulb holder into lamp housing and turn clockwise.
6. Insert lamp into bumper and let engage.
Interior lights Courtesy light, reading lights
Have bulbs replaced by a workshop.
Load compartment light Have bulbs replaced by a workshop.
Dome light, ambient light,starlight panel
Have bulbs replaced by a workshop.
Instrument panel
illumination
Have bulbs replaced by a workshop.

210IndexAAccessories and vehicle modifications .......................... 149
Adjustable air vents ...................116
Airbag and belt tensioners ...........82
Airbag deactivation ................42, 82
Airbag system .............................. 37
Air conditioning regular operation ................................ 117
Air conditioning system .............. 110
Air intake .................................... 117
Air vents...................................... 116
Antilock brake system ................ 124
Antilock brake system (ABS) .......83
Anti-theft alarm system ................24
Anti-theft locking system .............. 23
Appearance care ........................190
Ashtrays ....................................... 75
Automatic anti-dazzle ..................27
Automatic light control ...............102
Automatic locking ........................22
B Battery discharge protection ......108
Battery voltage ............................. 94
Belts.............................................. 34
Bicycle rack .................................. 51
Bonnet ....................................... 151
Brake and clutch fluid .................194Brake and clutch system .............83
Brake assist ............................... 125
Brake fluid .................................. 153
Brakes ............................... 124, 153
Breakdown.................................. 188
Bulb replacement ....................... 156
C Capacities .................................. 205
Car Pass ...................................... 18
Catalytic converter .....................123
Central locking system ................20
Changing tyre and wheel size ...175
Charging system .......................... 82
Child restraint installation locations ................................... 45
Child restraints.............................. 43
Child restraint systems ................43
Cigarette lighter ........................... 75
City mode ................................... 127
Climate control ............................. 15
Climate control systems .............109
Clock ............................................ 73
Code ............................................. 92
Control indicators.......................... 78
Control of the vehicle .................118
Controls ........................................ 68
Convex shape .............................. 25
Coolant and antifreeze ...............194
Cruise control ...................... 85, 129