2014 VAUXHALL ADAM audio

AUX input85AUX inputGeneral information.....................85
Usage .......................................... 85General information
On the control panel of the
Infotainment system 3 64 , there is an
AUX input for the connection of
external audio sources.
It is possible, for example, to connect a portable CD player with a 3.5 mm
jack plug to the AUX input.
Notice
The socket must always be kept clean and dry.
Usage
CD 3.0 BT: Press the MEDIA button
once or several times to activate the AUX mode.
R 3.0: Press the AUX button to
activate the AUX mode.Turn the m VOL knob of the
Infotainment system to adjust the
volume.
All other functions can be operated
only via the control elements of the
audio source.

86USB portUSB portGeneral information.....................86
Playing saved audio files .............87General information
In the centre console below the
climate controls there is an USB
socket for the connection of external
audio data sources.
Notice
The socket must always be kept
clean and dry.
An MP3 player, USB drive, SD card
(via USB connector/adapter), or iPod
can be connected to the USB port.
When connected to the USB port,
various functions of the above
devices can be operated via the
controls and menus of the
Infotainment system.
Notice
Not all MP3 player, USB drive, SD
card or iPod models are supported
by the Infotainment system.
Important information ■ The external devices connected to the USB port must comply with the
USB Mass Storage Class
specification (USB MSC).■ Devices connected via USB are supported according to USB
Specification V 2.0. Maximum
supported speed: 12 Mbit/s.
■ Only devices with a FAT16/FAT32 file system are supported.
■ Hard disk drives (HDD) are not supported.
■ USB hubs are not supported.
■ The following file formats can be used:
ISO9660 Level 1, Level 2 (Romeo,
Joliet).
MP3 and WMA files written in
another format than listed above
may not play correctly, and their file names and folder names may not
be displayed correctly.
■ The following restrictions apply to the files stored on the external
device:
Bit rate: 8 kbit/s - 320 kbit/s.
Sampling frequency: 48 kHz,
44.1 kHz, 32 kHz (for MPEG-1) and

USB port87
24 kHz, 22.05 kHz, 16kHz (forMPEG-2).
■ The following restrictions apply to the data stored on external devices
connected to the USB port:
Number of tracks: max. 999.
Number of tracks per folder level:
max. 512.
Folder structure depth: max. 10
levels.
WMA files with Digital Rights
Management (DRM) from online
music shops cannot be played.
WMA files can only be played
safely, if they were created with
Windows Media Player version 9 or later.
Applicable playlist
extensions: .m3u, .pls, .wpl.
Playlist entries must be in the form
of relative paths.
The system attribute for folders/ files that contain audio data must
not be set.Playing saved audio files
Press the MEDIA button once or
several times to activate the MP3 or
iPod mode.
Replay of the audio data stored on the
device is started automatically.
MP3:
iPod:
Using the device-specific menu Press the MENU-TUNE knob to open
the menu of the device currently connected.
Shuffle songs
To play all tracks in a random order:
set this function to On.
Notice
If this function is activated, 2 is
shown in the respective main menu.
Repeat
To repeatedly listen to a song: set this function to On.
Notice
If this function is activated, 1 is
shown in the respective main menu.
Folders
To select a track from a folder: select
Folders . A list of the folders stored on
the device is displayed.
Select one of the folders and then
select the desired track.

Bluetooth music89Bluetooth musicGeneral information.....................89
Operation ..................................... 89General information
Bluetooth enabled audio sources (e.g. music mobile phones, MP3
players featuring Bluetooth, etc.)
which support the Bluetooth music
protocol A2DP can be connected
wirelessly to the Infotainment system.
Important information ■ The Infotainment system only connects to Bluetooth devices that
support A2DP (Advanced Audio
Distribution Profile) version 1.2 or
higher.
■ The Bluetooth device must support
AVRCP (Audio Video Remote
Control Profile) version 1.0 or
higher. If the device does not
support AVRCP, only the volume
can be controlled via the
Infotainment system.
■ Before connecting the Bluetooth device to the Infotainment system,
become acquainted with its user
guide for Bluetooth functions.Operation
Prerequisites
The following prerequisites must be
met in order to use the Bluetooth
music mode of the Infotainment
system:
■ The Bluetooth function of the Infotainment system must be
activated 3 92.
■ The Bluetooth function of the external Bluetooth audio source
must be activated (see user guide
of the device).
■ Depending on the external Bluetooth audio source, it may be
required to set the device to
"visible" (see user guide of the
device).
■ The external Bluetooth audio source must be paired and
connected to the Infotainment
system 3 92.

Phone97
Select the desired call list, e.g.
Missed calls . A menu with the
corresponding call list is displayed.
To initiate a phone call: select the
desired list entry. The corresponding
phone number is dialled.
Redialling a phone number
The last dialled phone number can be
redialled.
Press the 7 button on the steering
wheel to open the Redial menu.
Press the 7 button again to start
dialling.
Press the xn button on the steering
wheel to exit the Redial menu. You
may optionally use the MENU-TUNE
knob to select No on the display.
Incoming phone call If an audio mode, e.g. the radio or CD
mode, is active at the time of an
incoming call, the relating audio
source will be muted and stay muted
until the call ends.
To answer the call: select Answer on
the display.
To reject the call: select Decline on
the display.
Second incoming phone call
If a second phone call comes in
during an ongoing call, a message is displayed.
To answer the second call and end the ongoing call: select Answer on the
display.
To reject the second call and continue the ongoing call: select Decline on the
display.Changing the ring tone
Press the CONFIG button to open the
Settings menu.
Select Phone settings , Sound &
Signals and then Ring tone. A list of
all ring tones available is displayed.
Select the desired ring tone.
Find a detailed description on the ring
tone volume 3 73.
Functions during a phone call
During an ongoing phone call, the
phone main menu will be displayed as
follows.
Select Menu on the display to open
the menu Connected .
Select Hang up on the display to end
the call.

101
DDAB .............................................. 80
Date settings................................. 68
Digital audio broadcasting ............80
Dynamic audio adaption ...............80
E Emergency call ............................. 94
F
Favourite lists ............................... 76
Retrieving stations..................... 76
Storing stations ......................... 76
G
General information 82, 85 , 86 , 89 , 91
AUX input .................................. 85
Bluetooth music......................... 89
CD player .................................. 82
Infotainment system ..................62
Phone ........................................ 91
USB port.................................... 86
I
Infotainment control panel ............64
L Language settings ........................68M
Maximum startup volume .............73
Menu operation............................. 70
MENU-TUNE knob .......................70
Mobile phones and CB radio equipment ................................ 98
Mute.............................................. 68
O Operation ................................ 89, 95
AUX input .................................. 85
Bluetooth music......................... 89
CD player .................................. 83
Menu ......................................... 70
Phone ........................................ 95
Radio ......................................... 74
USB port.................................... 87
P Phone Activating................................... 95
Bluetooth ................................... 91
Bluetooth connection ................92
Call lists ..................................... 95
Control elements .......................91
Dialling a number ......................95
Emergency calls ........................94
Functions during a call ..............95
General information................... 91
Important information ................91Incoming call ............................. 95
Phone book ............................... 95
Prerequisites ............................. 95
Redialling a phone number .......95
Selecting the ring tone ..............95
Phone book .................................. 95
Playing saved audio files ..............87
R Radio Activating................................... 74
Autostore lists............................ 75
Band selection .......................... 80
Category list .............................. 76
Configuring DAB .......................80
Configuring RDS .......................78
DAB announcements ................76
Digital audio broadcasting
(DAB) ........................................ 80
Dynamic audio adaption ...........80
Favourite lists ............................ 76
Radio data system (RDS) .........78
Radio traffic service................... 78
Regionalisation ......................... 78
Retrieving stations ..............75, 76
Selecting the waveband ............74
Station lists ................................ 76
Station search ........................... 74
Station tuning ............................ 74
Storing stations ...................75, 76

102
Traffic announcements.............78
Updating station lists .................76
Usage ........................................ 74
Waveband menus .....................76
Radio data system (RDS) ............78
Radio traffic service ......................78
RDS .............................................. 78
Redial function .............................. 95
Regionalisation ............................. 78
Retrieving stations ..................75, 76
Ring tone Ring tone volume ......................73
Selecting the ring tone ..............95
S Selecting the waveband ...............74
Starting CD replay ........................83
Station lists ................................... 76
Station search............................... 74
Steering wheel audio controls ......64
Storing stations .......................75, 76
Switching the Infotainment system on .................................. 68
Switching the radio on ..................74
System settings Language .................................. 68
Restore factory settings ............68
Time and date ........................... 68
Vehicle settings ......................... 68T
TA volume .................................... 73
Theft-deterrent feature ................. 63
Time settings ................................ 68
Tone settings ................................ 72
Traffic announcements .................78
U Updating station lists ....................76
Usage ......................... 68, 74, 83, 85
AUX input .................................. 85
Bluetooth music......................... 89
CD player .................................. 83
Menu ......................................... 70
Phone ........................................ 95
Radio ......................................... 74
USB port.................................... 87
USB menu .................................... 87
USB port Activation................................... 87
Connecting the USB device ......86
General information................... 86
Important information ................86
Operation .................................. 87
Removing the USB device ........87
USB menu ................................. 87V
Volume Auto volume control ..................73
Maximum startup volume ..........73
Mute function............................. 68 Ring tone volume ......................73
Setting the volume ....................68
Speed compensated volume ....73
TA volume ................................. 73
Volume limitation at high
temperatures ............................. 68
Volume settings ............................ 73
W
Waveband menus......................... 76

104FlexDockFlexDockGeneral information...................104
Usage ........................................ 104General information
FlexDock consists of a built-in base plate and different types of cradleswhich can be attached to the base
plate. By inserting an iPhone or a
different smartphone to the cradle,
the smartphone can be controlled via
Infotainment system, steering wheel
control or touch screen.
Detailed cradle usage information
can be found in the cradle manual supplied with each cradle.9 Warning
Devices attached to the FlexDock
have to be used in a way that
driver distraction is avoided and the vehicle can be driven safely at all times. You must always comply
with the respective laws and
regulations of the country where you are driving. These laws maydiffer from the information in this
owner's manual. If in doubt, stop
your vehicle and operate devices
while the vehicle is stationary.
Notice
Do not operate a further audio
source via the USB socket at the
same time due to superimpositions
of both audio sources.Caution
To avoid theft, do not leave the cellular phone in the FlexDock
when leaving the vehicle.
Usage
Attaching the cradle to the base
plate