2014 TOYOTA URBAN CRUISER warning lights

1
2
3
4
5
6
3
URBAN CRUISER_OM_OM52F47E_(EE)
2-1. Driving procedures Driving the vehicle .............. 168
Engine (ignition) switch (vehicles without smart
entry & start system)......... 181
Engine (ignition) switch (vehicles with smart
entry & start system)......... 185
Manual transmission ........... 189
Turn signal lever ................. 193
Parking brake...................... 194
Horn .................................... 195
2-2. Instrument cluster Gauges and meters ............ 196
Indicators and warning lights ................................. 198
Multi-information display ..... 202
2-3. Operating the lights and wipers
Headlight switch.................. 207
Fog light switch ................... 211
Windshield wipers and washer ....................... 213
Rear window wiper and washer ....................... 215 2-4. Using other driving systems
Stop & Start system ........... 217
Driving assist systems........ 223
Four-wheel drive lock (4WD models) .................. 229
Diesel Particulate Filter system (diesel engine
only) ................................. 230
2-5. Driving information Cargo and luggage............. 232
Winter driving tips............... 235
Trailer towing...................... 239
2When driving

44
1-2. Opening, closing and locking the doors
URBAN CRUISER_OM_OM52F47E_(EE)
● If the wireless remote control is used to lock the doors when the elec-
tronic key is near the vehicle, there is a possibility that the door may not
be unlocked by the smart entry & start system. (Use the wireless remote
control to unlock the doors.)
● A sudden approach to the effective range or door handle operation may
prevent the doors from being unlocked. In this case, return the door han-
dle to the original position and check that the doors unlock before pulling
the door handle again.
■ When the vehicle is not driven for extended periods
To prevent theft of the vehicle, do not leave the electronic key within 2 m (6
ft.) of the vehicle.
■ Security feature
If a door is not opened within approximately 30 seconds after the vehicle is
unlocked, the security feature automatically locks the vehicle again.
■ Alarms and warning indicators
A combination of exterior and interior alarms as well as warning lights are
used to prevent the theft of the vehicle and accidents resulting from errone-
ous operation.
● When any warning lights come on:
Take appropriate measures in response to which warning light comes on.
(→ P. 439)

2When driving
167
URBAN CRUISER_OM_OM52F47E_(EE)
2-1. Driving procedures Driving the vehicle ............ 168
Engine (ignition) switch (vehicles without smart
entry & start system)....... 181
Engine (ignition) switch (vehicles with smart
entry & start system)....... 185
Manual transmission......... 189
Turn signal lever ............... 193
Parking brake ................... 194
Horn .................................. 195
2-2. Instrument cluster Gauges and meters .......... 196
Indicators and warning lights ............................... 198
Multi-information display ............................ 202 2-3. Operating the lights
and wipers
Headlight switch................ 207
Fog light switch ................. 211
Windshield wipers and washer ..................... 213
Rear window wiper and washer ..................... 215
2-4. Using other driving systems Stop & Start system .......... 217
Driving assist systems ...... 223
Four-wheel drive lock (4WD models)................. 229
Diesel Particulate Filter system (diesel engine
only) ................................ 230
2-5. Driving information Cargo and luggage ........... 232
Winter driving tips ............. 235
Trailer towing .................... 239

197
2-2. Instrument cluster
2
When driving
URBAN CRUISER_OM_OM52F47E_(EE)
Instrument cluster light control
To adjust the brightness of the instrument cluster lights, push the
switch. Darker
Brighter
■The meters and display illuminate when
Vehicles without a smart entry & start system
The engine switch is in the “ON” position.
Vehicles with a smart entry & start system
The “ENGINE START STOP” switch is in IGNITION ON mode.
NOTICE
■To prevent damage to the engine and its components
●Do not let the indicator needle of the tachometer enter the red zone, which
indicates the maximum engine speed.
● The engine may be overheating if the high engine coolant temperature
warning light comes on. In this case, immediately stop the vehicle in a safe
place, and check the engine after it has cooled completely. (
→P. 493)

198
2-2. Instrument cluster
URBAN CRUISER_OM_OM52F47E_(EE)
Indicators and war ning lights
The indicator and warning lights on the instrument cluster and cen-
ter panel inform the driver of the status of the vehicle’s various sys-
tems.
Instrument cluster
Center panel

200
2-2. Instrument cluster
URBAN CRUISER_OM_OM52F47E_(EE)
■ Warning lights
Warning lights inform the driver of malfunctions in any of the
vehicle’s systems. ( →P. 439)
*1: These lights turn on when the engine switch is turned to the “ON”
position (vehicles without a smart entry & start system) or the
“ENGINE START STOP” switch is turned to IGNITION ON mode
(vehicles with a smart entry & start system) to indicate that a
system check is being performed. They will turn off after the engine
is started, or after a few seconds. There may be a malfunction in a
system if a light does not come on, or if the lights do not turn off.
Have the vehicle inspected by any authorized Toyota dealer or
repairer, or another duly qualified and equipped professional for
details.
*2: The indicator flashes to indicate that the system is operating.
*3: The indicator comes on to indicate a malfunction.
*4: The indicator comes on to indicate that the system is off.
(if equipped)(diesel
engine)(diesel
engine)
(diesel
engine)(if equipped)(4WD
models)
*1*1*1*1*1*1*1*1
*1, 3*1
*1*1, 3

5
439
When trouble arises
URBAN CRUISER_OM_OM52F47E_(EE)
5-2. Steps to take in an emergency
If a warning light turns on or a warning buzzer sounds
Stop the vehicle immediately. Continuing to drive the vehicle
may be dangerous.The following warning indicates a possible problem in the brake sys-
tem. Immediately stop the vehicle in a safe place and contact any
authorized Toyota dealer or repairer, or another duly qualified and
equipped professional.
*: Parking brake engaged warning buzzer: A buzzer will sound if the vehicle is driven at a speed of approximately
5 km/h (3 mph) or more.
Warning lightWarning light/Details
Brake system warning light (warning buzzer)
*
• Low brake fluid
• Malfunction in the brake system This light also comes on when the parking brake is not
released. If the light turns off after the parking brake is fully
released the system is operating normally.
Calmly perform the following actions if any of the warning lights
comes on or flashes. If a light turns on or flashes, but then goes off,
this does not necessarily indicate a malfunction in the system. How-
ever, if this continues to occur, have the vehicle inspected by any
authorized Toyota dealer or repairer, or another duly qualified and
equipped professional.

5
443
5-2. Steps to take in an emergency
When trouble arises
URBAN CRUISER_OM_OM52F47E_(EE)
Warning lightWarning light/DetailsCorrection procedure
(On the center panel) Front passenger’s seat
belt reminder light
(warning buzzer)
*
Warns the front passen-
ger to fasten his/her seat
belt.
Fasten the seat belt.
(On the instru- ment cluster) Rear passengers’ seat
belt reminder lights
Warn the rear passengers
to fasten their seat belts Fasten the seat belt.
(Flashes) Active Torque Control
4WD system warning light
(4WD models)
Indicates that the driveline
temperature is too high.
(When the light comes on.
→ P. 440) Reduce vehicle speed (until
the light goes off) or stop
the vehicle at a safe place
and allow the engine to idle
until the light goes off.
Low engine oil level warn-
ing light
(diesel engine) Indicates that engine oil
level is low. Check the level of engine
oil, and add if necessary.