2014 TOYOTA PRIUS PLUS display

1252. Instrument cluster
2
Instrument cluster
PRIUS +_OM_OM47888E_(EE)
■System check display
After turning the power switch to ON mode, opening image is displayed while
system operation is checked. When the system check is complete, the nor-
mal screen will return.
■ Pop-up display
When a system that supports pop-up displays, such as the air conditioning
system, is operated, a pop-up display will be temporarily displayed.
■ When disconnecting and reconnect ing 12-volt battery terminals
The fuel consumption display and average vehicle speed will be reset.
■ Liquid crystal display
Small spots or light spots may appear on the display. This phenomenon is
characteristic of liquid crystal displays, and there is no problem continuing to
use the display.
■ Meter display setting initialization
Press or on the meter control switch to select , and then
press .
Press or to select meter setting initialization, press , and then
select “YES”.
■ Customization
The meter settings can be changed.
(Customizable features: →P. 465)
NOTICE
■ The multi-information disp lay at low temperatures
Allow the interior of the vehicle to warm up before using the liquid crystal
information display. At extremely low temperatures, the information display
monitor may respond slowly, and display changes may be delayed.
1
2

1262. Instrument cluster
PRIUS +_OM_OM47888E_(EE)
Head-up display∗
Head-up display
Display brightness will change
automatically according to the
brightness of the surrounding area.
“HUD” (Head-up display) switch
“SET” switch
Display position adjustment
switch
Display brightness adjustment
switch
Used to adjust the display bright-
ness to the desired level.
∗: If equipped
The head-up display can be used to project vehicle speed and
other information onto the windshield.
Summary of functions
1
2
3
4
5

1272. Instrument cluster
2
Instrument cluster
PRIUS +_OM_OM47888E_(EE)■
Head-up display contents
●
Vehicle speed
● Turn-by-turn navigation (if equipped)
Displays a notification of upcoming intersections during navigation sys-
tem route guidance. ( →P. 127)
● Approach warning display (dynamic radar cruise control) (if
equipped) ( →P. 389)
● Pre-crash warning message (pre-crash safety system) (if
equipped) ( →P. 389)
On/off
When on, the indicator light on the
“HUD” switch comes on.
When the vehicle approaches an
intersection, the direction the vehi-
cle should go is guided by the
arrow, and the route guidance will
start and the distance
* to the
intersection will also be displayed.
*: The distance decreases in incre- ments of 50 m (164 ft.) and the dis-
tance indication will disappear
when the vehicle passes through
the intersection.
Switching the head-up display
Turn-by-turn navigation display (if equipped)

1282. Instrument cluster
PRIUS +_OM_OM47888E_(EE)■
Setting the brightness
The brightness of the display is automatically adjusted in accor-
dance with the brightness of the surrounding environment. How-
ever, the brightness can also be manually adjusted in 5 stages.
Brighter
Darker
The brightness can be manually
adjusted in 5 stages.
■
Adjusting the display position Higher
Lower
Setting up the display
1
2
1
2

1292. Instrument cluster
2
Instrument cluster
PRIUS +_OM_OM47888E_(EE)
The following display can be shown or hidden.
●Turn-by-turn navigation display (if equipped)
Press and hold the “SET”
switch.
Customization can be per-
formed when the head-up dis-
play is on and the vehicle is
traveling at less than 8 km/h (5
mph).
Press the display position
adjustment switch to select
ON or OFF.
Press and hold the “SET” switch.
Customizing the display
1
2
3

1302. Instrument cluster
PRIUS +_OM_OM47888E_(EE)
■System check display
After switching the power switch to ON mode, system operation is checked.
When the system check is complete, the normal screen will return.
■ When driving on snowy roads or in other bright environments
When the highest level of brightness has been reached, the display can be
made even brighter by pressing and holding “ ∧” on the brightness control but-
ton.
Pressing “ ∨” on the brightness control button or turning the power switch off
will cause the brightness level to revert to the original level.
■ Head-up display
●The head-up display may seem dark and hard to see when viewed through
sunglasses, especially polarized sunglasses.
Adjust the brightness of the head-up display or remove your sunglasses.
● When the head-up display is turned off, it will remain off even if the power
switch is turned to ON mode after the power switch has been turned off.
■ When the 12-volt battery is disconnected
The head-up display settings will be reset.
WARNING
■ Before using the head-up display
Check that the position and brightness of the head-up display image does
not interfere with safe driving. Incorrect adjustment of the image’s position
or brightness may obstruct the driver’s view and lead to an accident, result-
ing in death or serious injury.
NOTICE
■To prevent damage to the components
If an object falls into the opening of the
head-up display, remove it immediately.
Also, avoid spilling water or other liquids
near the head-up display opening as this
may cause mechanical damage.

1342. Instrument cluster
PRIUS +_OM_OM47888E_(EE)
Press the “CAR”. (→P. 131)
Select “Trip information” on the
“CAR” screen. Average vehicle speed since
the hybrid system was
started.
Cruising range ( →P. 135)
Fuel consumption in the past
15 minutes
Regenerated energy in the past 15 minutes
One symbol indicates 30 Wh.
Up to 5 symbols are shown.
Elapsed time since the hybrid system was started.
Resetting the consumption data
Average fuel consumption for the past 15 minutes is divided by
color into past averages and averages attained since the power
switch was last turned to ON mode. Use the displayed average fuel
consumption as a reference.
The image is an example only.
Trip information
1
2
1
2
3
4
5
6

1352. Instrument cluster
2
Instrument cluster
PRIUS +_OM_OM47888E_(EE)
Press the “CAR”. (→P. 131)
Select “Past record” on the
“CAR” screen. Best recorded fuel consump-
tion
Previous fuel consumption
record
Average fuel consumption
Updating the average fuel
consumption data
Resetting the past record data
The average fuel consumption history is divided by color into past
averages and the average fuel consumption since the last updated.
Use the displayed average fuel consumption as a reference.
The image is an example only.
■ Updating the past record data
Update the average fuel consumption by selecting “Update” to measure the
current fuel consumption again.
■ Resetting the data
The fuel consumption data can be deleted by selecting “Clear”.
■ Cruising range
Displays the estimated maximum distance that can be driven with the quan-
tity of fuel remaining.
This distance is computed based on your average fuel consumption.
As a result, the actual distance that can be driven may differ from that dis-
played.
Past record
1
2
1
2
3
4
5