2014 TOYOTA LAND CRUISER Disc

253
1. AUDIO/VIDEO SYSTEM OPERATION
5
AUDIO/VIDEO SYSTEM
L/C200_Navi_OM60L27U_(U)
13.06.03 19:41
If the Bluetooth® device is disconnected
on purpose, such as it was turned off, this
does not happen. Reconnect the portable
player manually.
1Press the “AUDIO” button if a
Bluetooth
® audio player has already
been connected.
2Touch the “BT Audio” tab or press the
“AUDIO” button repeatedly until the
“BT Audio” tab is selected.
: Touch to start playing the music.
: Touch to pause the music.
To start playing the music again, touch
.
Depending on the portable player that is
connected to the system, the music may
start playing when touching while it is
paused. Conversely, the music may pause
when touching while it is playing.
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
INFORMATION
●Touching “Connect Portable Player”
on the “Bluetooth*” screen also connects
a Bluetooth
® audio player. (See page
184.)
●When none of the selectable portable
players have been registered, a screen
confirming registration is displayed.
Registration method is the same as
phone registration. (See page 138.)
●When the currently connected portable
player is selected, a screen confirming
the selected player’s disconnection is
displayed. (See page 185.)
●If connection fails once, a changing con-
nection method confirmation screen is
displayed. If connection fails 2 or more
times, a message will be displayed.
When this message is displayed, try
again.
RECONNECTING THE
PORTABLE PLAYER
If the portable player is disconnected
due to poor reception from the
Bluetooth
® network when the
“ENGINE START STOP” switch is in
ACCESSORY or IGNITION ON mode,
the system automatically reconnects
the portable player.
PLAYING Bluetooth® AUDIO
PLAYING AND PAUSING
Bluetooth® AUDIO

261
1. AUDIO/VIDEO SYSTEM OPERATION
5
AUDIO/VIDEO SYSTEM
L/C200_Navi_OM60L27U_(U)
13.06.03 19:41
1Remove the insulating sheet before
using the remote control.
1Remove the cover.
2Remove the depleted batteries and in-
stall the new ones.
DISPLAY
The display is installed in the ceiling.
When audio-video equipment is con-
nected to the A/V input port, rear pas-
sengers can enjoy different audio
sources on each display. See “USING
THE VIDEO MODE” on page 277.
REAR SEAT
ENTERTAINMENT SYSTEM
CONTROLLER
BEFORE USING THE
CONTROLLER (FOR NEW
VEHICLE OWNERS)
INFORMATION
●An insulating sheet is set to prevent the
batteries from being discharged.
REPLACING THE
CONTROLLER BATTERIES
Necessary item for replacing two AA
batteries.
INFORMATION
●If the batteries are discharged, the
following symptoms may occur.
• The rear seat entertainment system
controller will not function properly.
• The operational range is reduced.
●When using AA batteries
• Batteries can be purchased at your
Toyota dealer, electric appliance shop,
or camera stores.
• Replace only with the same or equiva-
lent type recommended by your Toyota
dealer.
• Dispose of used batteries according to
the local laws.

263
1. AUDIO/VIDEO SYSTEM OPERATION
5
AUDIO/VIDEO SYSTEM
L/C200_Navi_OM60L27U_(U)
13.06.03 19:41
1To open the display, press the
“OPEN”, “SOURCE” or “DISC” but-
ton. To close the display, press the
“OPEN” or button.
If the display is closed with an image
shown, the image will automatically turn
off. (When you press the “OPEN” button,
the sound will not be turned off.)
1Press the “SETTING” button on the
controller.
2Select “TILT” tab.
3Select or .
This screen appears for a few seconds
when the rear display is opened. During
this time, only “OPEN/CLOSE” can be
operated.
OPENING AND CLOSING THE
DISPLAY
Opening and closing operations can be
performed from the front audio system.
(See page 266.)
JAM PROTECTION
The display will stop closing and return
to its previous position if something
gets in the way of it closing.
TILTING THE DISPLAY
INFORMATION
●The display angle is memorized and will
be recalled when the “ENGINE START
STOP” switch is turned to ACCESSORY
or IGNITION ON mode again.
CAUTION SCREEN

270
1. AUDIO/VIDEO SYSTEM OPERATION
L/C200_Navi_OM60L27U_(U)
13.06.03 19:41
1Press the button.
1Press the “” or “” button of “FOL/
CH” until the desired album number
appears on the screen.
1Press the or button repeated-
ly until the desired track number ap-
pears on the screen.
1Press the or button, or press
and hold the or button.
1Select disc mode on the source screen
to display the control screen.
2Press the or button until the
desired track number appears on the
screen.
1Press the or button, or press
and hold the or button.
1Press the button.
PLAYING AND PAUSING
Bluetooth® AUDIO
SELECTING A DESIRED
ALBUM
SELECTING A DESIRED
TRACK
FAST FORWARDING OR
REWINDING
INFORMATION
●Depending on the portable player that is
connected to the system, certain
functions may not be available.
PLAYING AN AUDIO CD/CD
TEXT
SELECTING A TRACK
FAST FORWARDING OR
REWINDING A TRACK
PLAYING OR PAUSING A
TRACK

271
1. AUDIO/VIDEO SYSTEM OPERATION
5
AUDIO/VIDEO SYSTEM
L/C200_Navi_OM60L27U_(U)
13.06.03 19:41
1Select disc mode on the source screen
to display the control screen.
2Press the or button until the
desired file number appears on the
screen.
1Press the “” or “” button of “FOL/
CH” until the desired folder number
appears on the screen.
1Press the or button, or press
and hold the or button.
1Press the button.Press the “DISC” button, or select disc
mode, to display DVD video.
PLAYING MP3/WMA DISCS
SELECTING A FILE
SELECTING A FOLDER
FAST FORWARDING OR
REWINDING A FILE
PLAYING OR PAUSING A FILE
PLAYING DVD VIDEO
SELECTING DVD VIDEO MODE
CONTROLLER
No.Function
Selecting an icon
Turning on the DVD mode
Inputting the selected icon
Playing/pausing a disc
Fast forwarding a disc during play-
back and forward slowly during
pause.
Stopping a screen
Turning on the menu

272
1. AUDIO/VIDEO SYSTEM OPERATION
L/C200_Navi_OM60L27U_(U)
13.06.03 19:41
1Press the “OPTION” button if no icons
are shown while watching a DVD video
and following screen appears.
“Settings”: Selecting to display setting
screen.
“Hide Buttons”: Selecting to turn off the
icons from the screen.
■DESCRIPTION OF DVD VIDEO
CONTROLS
■DVD SETTINGS
1Select “Settings” on the control icon
screen and this screen appears.
Turning on the control icon screen
Turning on the title selection screen
Press to select a chapter.
Press and hold to fast forward or
rewind a chapter.
Rewinding a disc during playback
DVD VIDEO
INFORMATION
●If appears on the screen when a
control is selected, the operation
relevant to the control is not permitted.
No.Function
Screen
buttonFunction
“Top
Menu”/
“Menu”Select to display the menu
screen for DVD video. (For
the operation, see the manual
that comes with the DVD vid-
eo disc provided separately.)
Select to rewind during play-
back.
Select to stop the video
screen.
Select to pause/resume the
video screen.
Select to fast forward during
playback and play in slow mo-
tion when the player is
paused.

274
1. AUDIO/VIDEO SYSTEM OPERATION
L/C200_Navi_OM60L27U_(U)
13.06.03 19:41
■CHANGING THE ANGLE
1Select “Angle” on the settings screen.
2Each time “Angle” is selected, the an-
gle is changed.
When is selected, the previous
screen is displayed.
■SETUP MENU
1Select “Setup” on the settings screen.
2Select the items to be set.
3After the initial setting has been
changed, select “OK”.
This screen will close, and the system will
return to the previous screen.
When “Default” is selected, all menus are
initialized.
The angle can be selected for discs
that are multi-angle compatible when
the angle mark appears on the screen.The initial setting can be changed.
There are initial setting buttons on the
“Setup Menu 1” and “Setup Menu 2”
screens.

275
1. AUDIO/VIDEO SYSTEM OPERATION
5
AUDIO/VIDEO SYSTEM
L/C200_Navi_OM60L27U_(U)
13.06.03 19:41
■AUDIO LANGUAGE
1Select “Audio Language” on the
“Setup Menu 1” screen.
2Select the desired language to be
heard on the “Audio Language”
screen.
If the desired language to be heard cannot
be found on this screen, select “Other”
and enter a language code. For entry of a
language code, see “ENTER AUDIO/
SUBTITLE/MENU LANGUAGE CODE” on
page 230.
To return to the “Setup Menu 1” screen,
select .
3Select “OK” on the “Setup Menu 1”
screen.
■SUBTITLE LANGUAGE
1Select “Subtitle Language” on the
“Setup Menu 1” screen.
2Select the desired language to be read
on the “Subtitle Language” screen.
If the desired language to be heard cannot
be found on this screen, select “Other”
and enter a language code. For entry of a
language code, see “ENTER AUDIO/
SUBTITLE/MENU LANGUAGE CODE” on
page 230.
To return to the “Setup Menu 1” screen,
select .
3Select “OK” on the “Setup Menu 1”
screen.
■DVD LANGUAGE
1Select “DVD Language” on the
“Setup Menu 1” screen.
2Select the desired language to be read
on the “DVD Language” screen.
If the desired language to be heard cannot
be found on this screen, select “Other”
and enter a language code. For entry of a
language code, see “ENTER AUDIO/
SUBTITLE/MENU LANGUAGE CODE” on
page 230.
To return to the “Setup Menu 1” screen,
select .
3Select “OK” on the “Setup Menu 1”
screen.
■ANGLE MARK
1Select “Angle Mark” on the “Setup
Menu 1” screen.
2Select “ON” or “OFF”.
3Select “OK” on the “Setup Menu 1”
screen.
The audio language can be changed.
The subtitle language can be changed.The language on the DVD video menu
can be changed.
The multi-angle mark can be turned on
or off on the screen while discs that are
multi-angle compatible are being
played.